TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€97.19

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€342.82 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€171.80

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€244.53 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€17.48

PAUL YAFFE BAGGER NATION Touchless Tie-Down System — Black, Pair

Secure, contact-free tie-downs that mount at the front gas tank tab to protect painted surfaces.

€81.54 €99.02

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

-€8.01

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€37.46 €45.47

-€63.47

PAUL YAFFE BAGGER NATION EZ Lift Engine Yanker — EZ Lift, Twin Cam Engine

Angled bracket for single-person engine removal and installation. Tig welded steel, 300 lb capacity. Requires an engine hoist. Use 1/2" thread engagement and washers.

€206.16 €269.63

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€52.19

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€244.12 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€4.89

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.79 €27.68

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€39.41

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€128.14 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

Exhaust Spring Puller Tool — T-handle, Black

-€2.29

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.72 €15.01

-€30.47

REGINA Compact Chain Assembly and Rivet Tool — 5/8", 520/525/530, Black

Single-tool solution for chain assembly and four-sided riveting. Durable hardened construction. Made in Italy.

€43.39 €73.86

Regina Professional Chain Assembly Tool — roller chain, master link clip or rivet

-€1.95

REGINA Regina Professional Chain Assembly Tool — roller chain, master...

Professional assembly tool set for sealed chains. Works with press-fit and rivet links. Includes 1/2" and 5/8" tools. Made in Italy.

€3.34 €5.29

Regina Professional Chain Assembly Tool — 1/2" (420, 428), 5/8" (520, 530)

-€16.12

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional tool for assembling sealed chains; fits 420/428 (1/2") and 520/530 (5/8"). Made in Italy.

€56.91 €73.03

Regina Professional Chain Assembly Tool — 1/2" for 420/428, 5/8" for 520/530, rivet links

-€137.65

REGINA Regina Professional Chain Assembly Tool — 1/2" for 420/428,...

Professional chain assembly tool for sealed chains. Works with press-fit and rivet links. Use 1/2" for 420/428 and 5/8" for 520/530.

€211.49 €349.14

Regina Professional Chain Assembly Tool — Roller chain, rivet connector, steel

-€98.01

REGINA Regina Professional Chain Assembly Tool — Roller chain, rivet...

Professional assembly tool for sealed chains. Works with press-fit and rivet links. Sizes: 1/2" for 420/428, 5/8" for 520/530. Made in Italy.

€345.69 €443.70

-€15.31

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional assembly tool for Regina sealed chains. 1/2" for 420–428 and 5/8" for 520–530. Made in Italy.

€54.01 €69.32

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS