TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Folding Bike Stand — 181 kg (400 lb), Orange

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Orange

Official FIM podium folding bike stand with clever folding design; tough polypropylene and rubber construction; opens to 300 x 420 x 450 mm; compact when closed.

€43.03 €58.25

Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400 lb), blue

-€15.22

POLISPORT Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400...

Official FIM podium support with a collapsible design; lightweight and easy to carry. Open: 300×420×450 mm; closed: 600×50 mm; weight 3700 g (8.15 lb).

€43.03 €58.25

Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

-€15.22

POLISPORT Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

Official FIM Motocross World Championship podium bike stand with a clever folding design for compact storage; lightweight and portable for race day use.

€43.03 €58.25

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Green

Official FIM Motocross World Championship podium stand. Folding, lightweight (3700 g / 8.15 lb), compact closed size for easy storage.

€43.03 €58.25

Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

Official FIM podium bike stand with a clever folding design for compact storage. Weighs 3700 g (8.15 lb). Open size: 300 mm × 420 mm × 450 mm. Closed size: 600 mm × 50 mm.

€43.03 €58.25

Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

Official FIM podium folding stand with compact fold-away design. Lightweight, easy to carry, injection-molded rubber contact points. Open: 300 × 420 × 450 mm; Closed: 600 × 50 mm. Weighs 3700 g (8.15 lb).

€43.03 €58.25

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Tripod Stand — Ø10 mm, Ø14 mm bases, Center/Front/Rear fit, Black

-€6.51

POLISPORT Tripod Stand — Ø10 mm, Ø14 mm bases, Center/Front/Rear fit, Black

Reduces fork pressure during transport. Includes two interchangeable bases (Ø10 mm, Ø14 mm). Easy to position between the front wheel and mudguard for washing and maintenance.

€18.41 €24.92

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

-€1.07

POLISPORT Mud Remover — Dirt Bike, Black

Raised textured handle for a positive grip; cleans spokes, flat surfaces and tight crevices; built-in 8, 10 and 12 mm tool; holes for hanging on the Tool Storage Wall; curved edges won’t graze the motorcycle; use before power washing.

€3.01 €4.08

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

Exhaust Gasket Installation Tool — fits '84–'24 Harley-Davidson & S&S Cycle

-€6.12

S&S CYCLE Exhaust Gasket Installation Tool — fits '84–'24...

Installs exhaust gaskets evenly; integrates with a 3/8" drive socket extension and fits tapered and straight gaskets.

€23.86 €29.98

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€5.45

S&S CYCLE Main Jet Tool — Silver, S&S CYCLE

Tool for changing main jets in super carburetors using #72 series jets. Made in the USA.

€21.19 €26.64

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

Inner Primary Bearing Race Installer — Clutch, Harley-Davidson®, Black

-€67.36

S&S CYCLE Inner Primary Bearing Race Installer — Clutch,...

Precision tool that reduces installation effort by 30% and seats inner primary bearing races. Made in the U.S.A.

€233.41 €300.77

-€40.37
Out of Stock

S&S CYCLE Compression Release Socket — Engine case, Silver

Service socket for compression release components. For use with compatible kits. Not for OEM heads. Made in the U.S.A.

€157.34 €197.71

-€14.23
Out of Stock

COLONY Wheel Lug Wrench — Wheel hub, Black

Strong, handy tool for removing or replacing brake drum wheel socket screws. Reproduction of original factory wrench. Made in the U.S.A.

€55.33 €69.56

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€28.02
Out of Stock

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€109.19 €137.21

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS