TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

-€23.86

S&S CYCLE Engine Stand — For Twin Cam B Motor, Blue

Professional display-quality engine stand that protects against corrosion and minor abrasions. An economical solution for bench work, shipping, or display. Made in the U.S.A.

€92.77 €116.63

-€57.13

S&S CYCLE Transmission Drilling Fixture — Black

Locates holes for drilling and tapping of the transmission case during T-Series engine installation with oil line adapter kit 310-0435.

€222.17 €279.30

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€23.86

S&S CYCLE Engine Stand — For M8 models, Blue

Professional, economical engine support for bench work, shipping, and display.

€92.77 €116.63

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

CVO Cam Phaser Tool — Spool Valve, Silver

-€12.51

S&S CYCLE CVO Cam Phaser Tool — Spool Valve, Silver

Secures the cam phaser assembly so you can remove the spool valve bolt and access the cam chest.

€48.61 €61.12

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€20.25

HYPERPRO Special Tool for Spring Removal — Fork spring remover, kit

Professional hydraulic tool to compress shock springs and remove retaining rings. Includes adjustable adapter plates and adapter ring HP-T26.

€78.75 €99.00

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€10.29

S&S CYCLE Exhaust Dealer Service Kit — Exhaust, Silver

Complete service kit containing tamper-proof screws and a proprietary tamper-proof screw bit for end cap replacement and routine maintenance.

€40.02 €50.31

Special Tool for Spring Removal — fork spring, HP-T02, black

-€61.16

HYPERPRO Special Tool for Spring Removal — fork spring, HP-T02, black

Hydraulic tool for compressing shock absorber springs and removing retaining rings; includes adjustable adapter plates and adapter ring HP-T26.

€237.84 €299.00

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

-€11.14

HYPERPRO Vice Clamp — Fork tube, 24 mm, black

Securely holds suspension components in a vise without damage.

Available in multiple diameters for versatile fitment.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Fork Tube, Black

Cushions and secures suspension components during maintenance; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Fork tube, Black

Holds suspension components securely in a vise without damage. Available in multiple diameters to meet most requirements.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 41 mm, black

Holds suspension components securely without marring; available in multiple diameters for workshop use.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 43 mm, black

Securely holds suspension components in a vise without causing damage; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 49 mm, Black

Holds suspension components in a vise without damage; available in multiple diameters for broad compatibility.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 50 mm fork tube, Black

Securely holds suspension components in a vise without damage; available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — fork tube, black

Protects suspension components in a vise; available in multiple diameters.

€48.86 €60.00

-€9.09

HYPERPRO Vice Clamp — Blue

Holds suspension components securely in a vise without damage; available in multiple diameters.

€40.91 €50.00

-€11.14

HYPERPRO Vice Clamp — Black

Holds suspension components securely in a vise without damage. Available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — Black

Holds suspension components securely in a vise without damage. Available in multiple diameters.

€48.86 €60.00

-€11.14

HYPERPRO Vice Clamp — 48 mm, Black

Securely holds suspension components without marring; available in multiple diameters.

€48.86 €60.00

-€9.09

HYPERPRO Vice Clamp — Blue

Holds suspension parts securely in a vise without damage. Available in multiple diameters to fit most applications.

€40.91 €50.00

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS