TOOLS

-€6.65

MOTION PRO 18 mm Spark Plug Socket — Silver

Thin-wall 18 mm spark plug socket for low-clearance plug cavities. Drives with ratchet, wrench, kit bar, or a Phillips screwdriver through the top hole.

€18.81 €25.46

-€6.69

MOTION PRO Snap Ring Pliers — Black, Red

Economical snap ring pliers that handle inside and outside rings; includes three extra tip sets for tight access.

€18.90 €25.59

-€5.17

MOTION PRO CR Bearing Retainer Tool — 44 mm, 22 mm hex, 3/8" drive, Silver

Tool for removing and replacing rear wheel bearing retainer rings with a 44 mm fit and multiple drive options.

€14.64 €19.81

90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

-€21.59

MOTION PRO 90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

Right-angle tool with five 1/4" hex bits; detent handle with laser-etched index; fits 1/4" or 6 mm hex bits; replaceable gears; max torque 50 lb/in.

€61.01 €82.60

-€7.39

MOTION PRO Master Link Clip Pliers — Master Link, Red, Silver

Notched short tip seats on the pin while the longer tip presses the clip for quick installation and removal.

€20.90 €28.29

-€5.34

MOTION PRO Oil Filter Strap Wrench — Oil Filter, Black

Strap wrench for spin-on oil filters; fits filters up to 125 mm (5"). Use with a 3/8" drive ratchet or extension.

€11.44 €16.78

Flywheel Puller Right Hand External Thread — M22 x 1.5, black oxide

-€3.10

MOTION PRO Flywheel Puller Right Hand External Thread — M22 x 1.5, black...

Right-hand threaded puller for removing flywheels or rotors; heat treated, durable finish, lifetime limited warranty.

€8.77 €11.87

Flywheel Puller Right Hand External Thread — M20 x 1.5, black oxide

-€3.42

MOTION PRO Flywheel Puller Right Hand External Thread — M20 x 1.5, black...

Compact flywheel puller designed for safe, reliable removal of flywheels and rotors; heat treated and laser marked.

€9.67 €13.09

-€4.14

MOTION PRO Flywheel Puller External Thread Hollow — M20 x 1.5, black oxide

Heat-treated puller for safe flywheel or rotor removal. Laser etched with Motion Pro logo and part number. Lifetime limited warranty.

€11.69 €15.83

$Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm (1-1/2\"), Silver$

-€7.12

MOTION PRO Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm...

Fits straight-slot timing plugs on most motorcycles and ATVs. Includes 16 mm (5/8\"), 22 mm (7/8\"), and 38 mm (1-1/2\") blades.

€20.10 €27.22

-€4.74

MOTION PRO Engine Timing Degree Wheel — 171.5 mm (6-3/4") , Blue anodized

Precision degree wheel for checking and setting ignition and cam timing.

€13.36 €18.10

-€5.29

MOTION PRO Torque Wrench Adapter — MOTION PRO, Cylinder, Nickel Pewter

Extends the reach of 3/8" drive torque wrenches by 3"; fits 12 mm and 14 mm nuts and bolts. Check the owner's manual for proper torque specifications.

€14.97 €20.26

-€12.67

MOTION PRO Ratchet Spark Plug Wrench — 13/16" plug, 2-stroke, silver

Compact ratcheting spark plug wrench for tight spaces on many water-cooled 2-stroke engines; fits standard 13/16" plugs.

€16.68 €29.35

Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

-€2.80

MOTION PRO Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

Heat-treated steel tool with 24 mm inside diameter; fits 3/8" drive tools for many Honda single- and twin-cylinder models.

€7.90 €10.70

-€4.74

MOTION PRO Valve Shim Tools — For Suzuki models, Silver

Holds valve spring bucket down for safe shim removal; for adjusting valve clearance on twin cam models; hardened alloy construction.

€13.36 €18.10

-€4.74

MOTION PRO Valve Shim Tools — Silver, Alloy steel

Holds valve spring bucket down for shim removal; fits twin cam valve adjustments; hardened alloy steel construction.

€13.36 €18.10

Flywheel Puller Left Hand External Thread — M27 x 1.0, Black oxide

-€4.43

MOTION PRO Flywheel Puller Left Hand External Thread — M27 x 1.0, Black...

Left-hand external-thread flywheel puller for safe, controlled removal. Laser etched, heat treated, durable finish, lifetime limited warranty.

€12.53 €16.96

Flywheel Puller Right Hand External Thread — M16 x 1.5, Black oxide

-€2.52

MOTION PRO Flywheel Puller Right Hand External Thread — M16 x 1.5, Black...

Tool for removing flywheels and rotors; heat treated, laser marked, and backed by a lifetime limited warranty.

€7.11 €9.63

-€3.85

MOTION PRO Valve Shim Tools — For Yamaha models, Black

Holds valve spring bucket down for shim removal; for adjusting valve clearance on twin cam models; hardened alloy steel.

€10.85 €14.70

-€2.81

MOTION PRO Valve Shim Tools — For Kawasaki models, black

Holds valve spring bucket down for safe shim removal; designed for twin cam valve clearance adjustment.

€7.95 €10.76

Metric Socket T-Handle Set — Set of 7, 8, 10, 12, 13, 14, 17, 19 mm

-€17.16

MOTION PRO Metric Socket T-Handle Set — Set of 7, 8, 10, 12, 13, 14, 17,...

Slim six-point sockets with a durable handle and vinyl pouch. Hex design holds nuts flush for easier starts.

€48.48 €65.64

-€2.81

MOTION PRO Cable Luber — cable housing, blue

Clamps over the outer sleeve and inner wire to attach an aerosol can; injects lubricant so the cable is lubricated as it reaches the far end.

€7.93 €10.74

Ball-End Allen Set — Metric assortment, chrome finish

-€6.21

MOTION PRO Ball-End Allen Set — Metric assortment, chrome finish

Ball-end Allen set with sizes 1.5–10 mm, convenient holder, chrome vanadium steel, made in the USA.

€17.53 €23.74

Heavy-Duty Spring Hook — Blue, Silver, P/N 08-0127

-€4.43

MOTION PRO Heavy-Duty Spring Hook — Blue, Silver, P/N 08-0127

Removes exhaust and seat springs, cotter pins, and side-stand springs for quick motorcycle maintenance.

€12.53 €16.96

-€9.02

MOTION PRO Mini Pro T-Handle Tool Set — 8 mm, 10 mm, 12 mm, 171.5 mm

Three compact wrenches with deep six-point sockets, chrome-vanadium shafts, durable plated finish.

€25.49 €34.51

Multi-Purpose Tool — 8–14 mm sockets, 5 & 6 mm hex, #2–#3 Phillips, 1/4" & 3/8" drivers, nickel pewter

-€20.49

MOTION PRO Multi-Purpose Tool — 8–14 mm sockets, 5 & 6 mm hex, #2–#3...

Tool for 8–14 mm bolts, 5–6 mm hex, #2–#3 Phillips; includes 1/4" and 3/8" drivers, 10/12 mm sockets, and a carrying case.

€57.90 €78.39

Individual Metric Socket T-Handle — 8 mm, 196.9 mm (7-3/4") , Nickel Pewter

-€1.93

MOTION PRO Individual Metric Socket T-Handle — 8 mm, 196.9 mm (7-3/4") ,...

Hex socket extends partway so the nut can be held; slim outside diameter fits tight areas; ideal for shop and home mechanics.

€5.43 €7.36

Individual Metric Socket T-Handle — 10 mm, 190.5 mm, Nickel Pewter

-€2.22

MOTION PRO Individual Metric Socket T-Handle — 10 mm, 190.5 mm, Nickel...

Slim T-handle socket designed for access in tight spaces; hex sockets hold nuts partway for secure handling.

€6.27 €8.49

Individual Metric Socket T-Handle — 12 mm, 222.3 mm (8-3/4") , Nickel Pewter

-€2.52

MOTION PRO Individual Metric Socket T-Handle — 12 mm, 222.3 mm (8-3/4") ,...

Hex recess retains fasteners while the slim profile reaches tight spaces — ideal for shop or home use.

€7.11 €9.63

Individual Metric Socket T-Handle — 13 mm, 222.3 mm (8-3/4"), nickel pewter

-€2.52

MOTION PRO Individual Metric Socket T-Handle — 13 mm, 222.3 mm (8-3/4"),...

Slim-profile metric T-handle with a partial-depth hex socket that holds fasteners in tight spaces; ideal for shop and home mechanics.

€7.11 €9.63

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS