TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Traction Ladder — 208 cm (82"), 38 cm (15"), Black

-€26.10

CALIBER Traction Ladder — 208 cm (82"), 38 cm (15"), Black

Rollout grip design delivers superior traction on iced surfaces; compact for easy storage and quick attachment.

€58.78 €84.88

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

-€50.39

CALIBER Traction Ladder — Black, Ramp Pro HD

Compact rollout traction aid for improved grip on icy surfaces. Easy to attach with a large 1" clip and simple to store.

€142.41 €192.80

XTrax - Off-Road Recovery Boards — 67.5 cm x 31.75 cm, Black, Pair

-€65.89

CALIBER XTrax - Off-Road Recovery Boards — 67.5 cm x 31.75 cm, Black,...

Durable off-road recovery solution with innovative tread, glove-friendly handle, and included straps for linking.

€186.19 €252.08

XTrax - Off-Road Recovery Boards — 67.5 cm length, 31.75 cm width, Red

-€65.89

CALIBER XTrax - Off-Road Recovery Boards — 67.5 cm length, 31.75 cm...

High-traction recovery boards with an innovative tread pattern, glove-friendly handles, durable material blend, and included linking straps.

€186.19 €252.08

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

D-Ring Anchor Kits — 5,000 lb (2,268 kg), Zinc-Plated

-€12.70

CALIBER D-Ring Anchor Kits — 5,000 lb (2,268 kg), Zinc-Plated

Flush-mount, spring-loaded D-ring anchor kit includes rings, backer plates and Torx T-20 hardware. Made in the U.S.A.

€35.90 €48.60

D-Ring Anchor Kits — 2268 kg (5000 lb), Stainless Steel

-€25.43

CALIBER D-Ring Anchor Kits — 2268 kg (5000 lb), Stainless Steel

Two D-rings with full backer plates and Torx T-20 hardware; flush-mount, spring-loaded design—made in the U.S.A.

€71.85 €97.28

Retrax™ Straps — 1.83 m, 680 kg (1,500 lb), Red

-€15.44

CALIBER Retrax™ Straps — 1.83 m, 680 kg (1,500 lb), Red

Self-retracting tie-down with extra-large 2” hook and integrated spring clip. Flexible, durable, and made in USA.

€43.64 €59.08

-€8.22

CALIBER Retrax Strap — CALIBER 13548

Required for split use of the Ramp Pro HD. Secures the outer portion of Ramp Pro systems when loading larger vehicles. Made in the U.S.A.

€23.23 €31.45

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Folding Bike Stand — 181 kg (400 lb), Orange

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Orange

Official FIM podium folding bike stand with clever folding design; tough polypropylene and rubber construction; opens to 300 x 420 x 450 mm; compact when closed.

€43.03 €58.25

Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400 lb), blue

-€15.22

POLISPORT Folding Bike Stand — 300 mm × 420 mm × 450 mm, 181 kg (400...

Official FIM podium support with a collapsible design; lightweight and easy to carry. Open: 300×420×450 mm; closed: 600×50 mm; weight 3700 g (8.15 lb).

€43.03 €58.25

Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

-€15.22

POLISPORT Folding Bike Stand — Open 300×420×450 mm, 181 kg, Red

Official FIM Motocross World Championship podium bike stand with a clever folding design for compact storage; lightweight and portable for race day use.

€43.03 €58.25

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Green

Official FIM Motocross World Championship podium stand. Folding, lightweight (3700 g / 8.15 lb), compact closed size for easy storage.

€43.03 €58.25

Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Polypropylene, Black

Official FIM podium bike stand with a clever folding design for compact storage. Weighs 3700 g (8.15 lb). Open size: 300 mm × 420 mm × 450 mm. Closed size: 600 mm × 50 mm.

€43.03 €58.25

Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

-€15.22

POLISPORT Folding Bike Stand — 181 kg (400 lb), Off-road/Sport, Black

Official FIM podium folding stand with compact fold-away design. Lightweight, easy to carry, injection-molded rubber contact points. Open: 300 × 420 × 450 mm; Closed: 600 × 50 mm. Weighs 3700 g (8.15 lb).

€43.03 €58.25

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS