TOOLS

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

-€6.52

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€21.20 €27.72

-€6.66

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€21.66 €28.32

-€23.79

PSR Roll-On Wheel Chock — 16"–21" wheel fit, front mounting

Heavy-duty, sturdy design. Fits wheels 16"–21".

€111.05 €134.84

Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

-€11.12

PSR Tie-Down Clamp — 31.8 mm (1-1/4"), anodized

Instant anchor points with an oval opening for single or double hooks. Rubber insert protects fork surfaces.

€51.91 €63.03

$Moto Stand — 30.5 cm (12\") length, Black$

-€18.41

CYCRA Moto Stand — 30.5 cm (12\") length, Black

Molded rubber top with countersunk area for rivets, large built-in tool tray, wide guide edges, composite plastic legs.

€59.82 €78.23

$Moto Stand — 12\" , Orange$

-€18.41

CYCRA Moto Stand — 12\" , Orange

Low-profile service stand with molded rubber top, built-in tool tray, wide guide edges and composite legs.

€59.82 €78.23

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

-€18.41

CYCRA Moto Stand — 12" (30.5 cm), Red

Stable maintenance platform with a molded rubber top, large built-in tool tray, wide guide edges and composite plastic legs.

€59.82 €78.23

T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

-€3.99

BIKESERVICE T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

Improves T-handle rotation and reduces hand-to-shaft friction for faster fastener removal and positioning.

€12.96 €16.95

Extra Long Magnetic Torx Key Set — T10,T15,T20,T25,T27,T30,T40,T45,T50, Chrome

-€7.35

BIKESERVICE Extra Long Magnetic Torx Key Set —...

Extra-long Torx key set with built-in magnet. Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50. Extended reach and tamper-proof base ends.

€23.87 €31.22

-€7.03

BIKESERVICE Extra Long Magnetic Hex Key Set — 1.5–10 mm, Chrome

Nine-piece extra-long hex key set with ball-end access up to 25° and extended reach for hard-to-reach fasteners. Sizes 1.5–10 mm.

€22.82 €29.85

-€12.72

PSR Econo Rear Stand — Adjustable 13.75–15 in, White powder-coated

Universal rear stand for swingarms with spools. Adjustable width 13.75"–15". Mild-steel construction. Optional non-spool hardware sold separately (sold in pairs).

€59.39 €72.11

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set of 8, Silver

-€33.65

BIKESERVICE Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set...

Precision 72-tooth ratcheting gears need only a 5° swing arc to operate in tight spaces. Flex head access improves engagement and reduces fastener rounding.

€109.35 €143.00

Crankcase Separator — 2-stroke, 4-stroke

-€42.29

BIKESERVICE Crankcase Separator — 2-stroke, 4-stroke

Rebuild tool for separating vertically split single-cylinder crankcases. Includes M8-M6 double-ended screw, center pulling screw, quick-adjust nut and three-leg puller frame.

€137.45 €179.74

Stud Remover & Installer — Engine, Black

-€2.46

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Suitable for common stud thread sizes.

€7.96 €10.42

-€2.47

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Fits most common stud thread sizes for workshop use.

€8.02 €10.49

-€2.47

BIKESERVICE Stud Remover & Installer — Metric, Black

Removes and installs studs cleanly without thread damage; fits most common thread sizes.

€8.02 €10.49

-€2.47

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads; fits most common stud thread sizes.

€8.02 €10.49

-€6.82

BIKESERVICE Double-Ear Hose Clamp Pliers — 220 mm

Tool for reliable crimping of one- and two-ear hose clamps with top and side jaws for versatile use.

€22.16 €28.98

Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

-€33.38

BIKESERVICE Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

Ratcheting compressor and expander pliers for easy piston and ring installation. Fits 1-3/8"–4-3/8" pistons.

€108.48 €141.86

Piston Ring Expanding Pliers — For engine pistons

-€4.72

BIKESERVICE Piston Ring Expanding Pliers — For engine pistons

Ratcheting pliers with tapered jaws for controlled expansion and easy piston ring installation.

€15.35 €20.07

-€15.68

BIKESERVICE Flywheel Puller Kit — Clutch, Engine

Versatile kit for extracting flywheels, clutch bodies and primary gear assemblies; includes multiple yokes, a 125 mm forcing screw and assorted bolts; working range 30–100 mm.

€50.95 €66.63

Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm capacity, reach up to 220 mm

-€35.08

BIKESERVICE Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm...

Includes 2" and 3" bearing splitters covering 30–75 mm, bar-type puller head with 175 mm thrust bolt. Removes bearings, gears, sprockets and bushes.

€114.01 €149.09

Stud Setter & Extractor — 6 mm–19 mm, Black

-€7.10

BIKESERVICE Stud Setter & Extractor — 6 mm–19 mm, Black

Eccentric rotation grips stubborn or rusted threads for setting or removal. Fits 6 mm–19 mm studs.

€23.12 €30.22

Universal 3-Leg Oil Filter Wrench — 63–95 mm, Black

-€2.64

BIKESERVICE Universal 3-Leg Oil Filter Wrench — 63–95 mm, Black

Fits filter diameters 63–95 mm; use with a 3/8" square drive ratchet. Vinyl-dipped legs reduce filter damage.

€8.60 €11.24

-€18.31

BIKESERVICE Oil Filter Cup Wrench Set — Black Oxide

Easy removal of hard-to-reach filters
Use with 3/8" square drive and 19 mm hex driver
Handles up to 85 ft/lbs torque

€59.53 €77.84

-€2.99

BIKESERVICE Thin Wall Spark Plug Socket — 16 mm, hex and square drive

Thin-wall socket built to reach narrow spark plug wells with a rubber insert that holds plugs securely.

€9.72 €12.71

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS