TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€97.19

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€342.82 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€171.80

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€244.53 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€16.17

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€75.47 €91.64

-€2.10

KELLERMANN Replacement Pins for KTW 2.5 — 130.240, Steel

Precision replacement pins for KTW 2.5, compatible with pin punch 4xx, pin punch 5xx and 6xx.

€14.66 €16.76

-€4.24

KELLERMANN Upgrade set KTW 2.0 → KTW 2.5 — Black steel finish

Upgrade set for KTW 2.0 to KTW 2.5 including pin punches 4xx–6xx, fence, fixing screw and pressure screw for accurate chain work.

€29.33 €33.57

-€9.85

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€45.96 €55.81

-€39.81

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€185.75 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€22.72

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€106.01 €128.73

-€3.36

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.67 €19.03

-€8.93

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€41.66 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€39.69

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€185.21 €224.90

-€22.72

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€106.01 €128.73

T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

-€3.99

BIKESERVICE T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

Improves T-handle rotation and reduces hand-to-shaft friction for faster fastener removal and positioning.

€12.96 €16.95

Extra Long Magnetic Torx Key Set — T10,T15,T20,T25,T27,T30,T40,T45,T50, Chrome

-€7.35

BIKESERVICE Extra Long Magnetic Torx Key Set —...

Extra-long Torx key set with built-in magnet. Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50. Extended reach and tamper-proof base ends.

€23.87 €31.22

-€7.03

BIKESERVICE Extra Long Magnetic Hex Key Set — 1.5–10 mm, Chrome

Nine-piece extra-long hex key set with ball-end access up to 25° and extended reach for hard-to-reach fasteners. Sizes 1.5–10 mm.

€22.82 €29.85

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set of 8, Silver

-€33.65

BIKESERVICE Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set...

Precision 72-tooth ratcheting gears need only a 5° swing arc to operate in tight spaces. Flex head access improves engagement and reduces fastener rounding.

€109.35 €143.00

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€33.47

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€156.24 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€15.75

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€73.49 €89.24

Crankcase Separator — 2-stroke, 4-stroke

-€42.29

BIKESERVICE Crankcase Separator — 2-stroke, 4-stroke

Rebuild tool for separating vertically split single-cylinder crankcases. Includes M8-M6 double-ended screw, center pulling screw, quick-adjust nut and three-leg puller frame.

€137.45 €179.74

Stud Remover & Installer — Engine, Black

-€2.46

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Suitable for common stud thread sizes.

€7.96 €10.42

-€2.47

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Fits most common stud thread sizes for workshop use.

€8.02 €10.49

-€2.47

BIKESERVICE Stud Remover & Installer — Metric, Black

Removes and installs studs cleanly without thread damage; fits most common thread sizes.

€8.02 €10.49

-€2.47

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads; fits most common stud thread sizes.

€8.02 €10.49

-€6.82

BIKESERVICE Double-Ear Hose Clamp Pliers — 220 mm

Tool for reliable crimping of one- and two-ear hose clamps with top and side jaws for versatile use.

€22.16 €28.98

Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

-€33.38

BIKESERVICE Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

Ratcheting compressor and expander pliers for easy piston and ring installation. Fits 1-3/8"–4-3/8" pistons.

€108.48 €141.86

Piston Ring Expanding Pliers — For engine pistons

-€4.72

BIKESERVICE Piston Ring Expanding Pliers — For engine pistons

Ratcheting pliers with tapered jaws for controlled expansion and easy piston ring installation.

€15.35 €20.07

-€15.68

BIKESERVICE Flywheel Puller Kit — Clutch, Engine

Versatile kit for extracting flywheels, clutch bodies and primary gear assemblies; includes multiple yokes, a 125 mm forcing screw and assorted bolts; working range 30–100 mm.

€50.95 €66.63

Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm capacity, reach up to 220 mm

-€35.08

BIKESERVICE Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm...

Includes 2" and 3" bearing splitters covering 30–75 mm, bar-type puller head with 175 mm thrust bolt. Removes bearings, gears, sprockets and bushes.

€114.01 €149.09

Stud Setter & Extractor — 6 mm–19 mm, Black

-€7.10

BIKESERVICE Stud Setter & Extractor — 6 mm–19 mm, Black

Eccentric rotation grips stubborn or rusted threads for setting or removal. Fits 6 mm–19 mm studs.

€23.12 €30.22

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS