TOOLS

-€6.26

MOOSE OFFROAD HARD-PARTS Tubeless Tire Valve Tool

The Tubeless Tire Valve Tool is designed for easy installation and removal of rubber snap-in valves, compatible with all valve stems and rim sizes.

€17.69 €23.95

Pinion Gear Locker Tool — pinion gear, Black

-€16.21

JIMS Pinion Gear Locker Tool — pinion gear, Black

Locks the gear while torquing the nut; aligns under the gear and screws into the case. Made in the U.S.A.

€63.02 €79.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€2.60

KELLERMANN Replacement Pins for KTW 2.5 — 130.240, Steel

Precision replacement pins for KTW 2.5, compatible with pin punch 4xx, pin punch 5xx and 6xx.

€14.16 €16.76

-€5.24

KELLERMANN Upgrade set KTW 2.0 → KTW 2.5 — Black steel finish

Upgrade set for KTW 2.0 to KTW 2.5 including pin punches 4xx–6xx, fence, fixing screw and pressure screw for accurate chain work.

€28.33 €33.57

Tri-fold Adjustable Ramp — 76 in length, 52 in width

-€51.12

MOOSE OFFROAD FOUR WHEEL Tri-fold Adjustable Ramp — 76 in length, 52 in width

Adjustable tri-fold ramp, fits 42–52 in, 1,250-lb. distributed capacity, bar-style traction surface; includes E‑Z grip rubber truckrests and nylon straps. Do not ride ATV on ramp.

€198.83 €249.95

$Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg (595 lb) load capacity$

-€26.38

MOOSE OFFROAD HARD-PARTS Arched Aluminum Folding Ramp — 229 cm (90\") length, 270 kg...

Durable, lightweight aluminum arched folding ramp with E-Z grip rubber rests and nylon safety straps. Weighs only 13 lb. Maximum load 600 lb. Do not ride motorcycle on ramp.

€74.57 €100.95

-€72.90

MOOSE OFFROAD HARD-PARTS 6 Foot Ramp — 6 ft, 300 lb capacity, 4-pack

Aircraft-aluminum straight ramp with dimpled traction holes, rubber-coated tongue and stop-pin. Sold to dealers in 4-packs. Do not ride a motorcycle on the ramp.

€206.05 €278.95

$Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)$

-€20.89

MOOSE OFFROAD HARD-PARTS Aluminum Straight Folding Ramp — 213 cm (84\") , 180 kg (396 lb)

Folding straight aluminum ramp with rubber-coated fingers; folds flat for storage. Max load: 400 lb. Do not ride motorcycle on ramp.

€59.06 €79.95

-€4.69

MOOSE OFFROAD FOUR WHEEL Ramp Straps — Black, Pair, 3910-0028

Replacement straps for folding ramps. Adjustable length and easy installation.

€13.26 €17.95

-€143.73

MOOSE OFFROAD FOUR WHEEL UTV Loading Ramp — 241 cm (95"), 45.5 cm (18"), Aluminum

Heavy-duty loading ramps with EZ-grip rubber rests and nylon straps. Do not ride UTV or ATV on the ramp.

€406.22 €549.95

Aluminum 9 Foot Straight Folding Ramp — 12 in W x 9 ft L, 500 lb capacity

-€45.98

MOOSE OFFROAD HARD-PARTS Aluminum 9 Foot Straight Folding Ramp — 12 in W x 9 ft L, 500...

Durable, lightweight aluminum ramp designed for loading off-road motorcycles. Weather-resistant with a sturdy frame and included tie-down. Not for riding on the ramp.

€129.97 €175.95

Sprocket Lock Tool — Crankshaft, camshaft, Black

-€23.73

JIMS Sprocket Lock Tool — Crankshaft, camshaft, Black

Locks camshafts and crankshaft sprockets for safe removal, replacement and torquing. Includes instructions. Made in the U.S.A.

€92.27 €116.00

-€84.43

JIMS Inner Cam Bearing Removal Tool — Kit, Black

Purpose-built tool for removing inner cam bearings without damaging the crankcase; includes instructions and retention design to prevent rollers from falling into the engine.

€328.33 €412.76

10-Piece Hex Wrench Set — 1.5–10 mm, set of 10, Blue, Silver

-€2.86

MOOSE OFFROAD HARD-PARTS 10-Piece Hex Wrench Set — 1.5–10 mm, set of 10, Blue, Silver

Metric 10-piece hex key set with sizes from 1.5 mm to 10 mm. Includes a plastic holder for neat storage; ideal for precision repairs and routine maintenance.

€8.09 €10.95

-€9.82

JIMS Replacement Wheel Bearing Expander Rod — Black

Replacement expander rod for sealed wheel bearing remover/installer kits. Made in the USA.

€38.18 €48.00

-€99.44

JIMS Case Splitter Tool — Crankcase, Black

Separates sealed engine case halves using a hand thread-in pushing screw; bolts to primary mounting holes. Made in the U.S.A.

€386.69 €486.13

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

-€7.33

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€17.90 €25.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm), 362 kg (800 lb), Powder Coated

-€25.86

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm),...

Center-folding mesh ramp with welded carrying handle, rubber-coated fingers, and included tie down straps. Warning: do not ride motorcycles or ATVs on the ramp.

€73.09 €98.95

-€7.24

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€17.71 €24.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€18.80

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€53.15 €71.95

-€7.40

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.09 €25.49

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€18.80

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€53.15 €71.95

-€16.38

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for safe maintenance; use with a torque wrench or breaker bar. Made in the U.S.A.

€63.72 €80.10

-€8.25

JIMS Shifter Fork Shaft Removal Tool — Black, Chrome

Loosens and removes both shifter shafts from the transmission door for easy disassembly. Made in the USA.

€32.09 €40.34

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS