TOOLS

Regina Professional Chain Riveting Tool — 420, 428, rivet

-€108.87

REGINA Regina Professional Chain Riveting Tool — 420, 428, rivet

Professional-grade chain fastening tool for precise, long-lasting joins; made in Italy and built for workshop use.

€331.14 €440.01

Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

-€180.14

REGINA Regina Professional Chain Riveting Tool — 520, 525, 530, Rivet

Professional hand tool for riveting sealed Regina chains. Delivers shop-quality rivets; available in 1/2" and 5/8" sizes. Made in Italy.

€236.19 €416.33

Scorpion Clutch Hub Puller — Orange, Anodized

-€36.97

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€54.67 €91.64

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Fuel Transfer System for Delphi Fuel Injection — Black, Fits '01–'25 Harley-Davidson (except V‑Rod)

-€38.60

FUEL-TOOL Fuel Transfer System for Delphi Fuel Injection — Black, Fits...

Transfers up to one quart every 20 seconds; tool-free connection. Includes storage pouch. Fits '01–'25 Harley-Davidson models (except V‑Rod). Made in the USA.

€109.08 €147.68

-€53.44

FUEL-TOOL Fuel Pressure Check Gauge — Delphi fuel injection, Black

Compact gauge for quick, accurate fuel pressure checks on '01-'25 Harley Davidson Delphi fuel-injected models.

€151.05 €204.49

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€5.54

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 €27.06

-€5.90

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 €28.84

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

Exhaust Spring Puller Tool — T-handle, Black

-€5.79

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€9.22 €15.01

-€31.95

REGINA Compact Chain Assembly and Rivet Tool — 5/8", 520/525/530, Black

Single-tool solution for chain assembly and four-sided riveting. Durable hardened construction. Made in Italy.

€41.91 €73.86

Regina Professional Chain Assembly Tool — roller chain, master link clip or rivet

-€2.06

REGINA Regina Professional Chain Assembly Tool — roller chain, master...

Professional assembly tool set for sealed chains. Works with press-fit and rivet links. Includes 1/2" and 5/8" tools. Made in Italy.

€3.23 €5.29

Regina Professional Chain Assembly Tool — 1/2" (420, 428), 5/8" (520, 530)

-€18.06

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional tool for assembling sealed chains; fits 420/428 (1/2") and 520/530 (5/8"). Made in Italy.

€54.97 €73.03

Regina Professional Chain Assembly Tool — Roller chain, rivet connector, steel

-€109.79

REGINA Regina Professional Chain Assembly Tool — Roller chain, rivet...

Professional assembly tool for sealed chains. Works with press-fit and rivet links. Sizes: 1/2" for 420/428, 5/8" for 520/530. Made in Italy.

€333.91 €443.70

-€17.15

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional assembly tool for Regina sealed chains. 1/2" for 420–428 and 5/8" for 520–530. Made in Italy.

€52.17 €69.32

Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller chain, Steel, Specialty tool

-€8.06

REGINA Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller...

Compact single-tool solution for assembling and four-sided riveting of Regina 520/525/530 O- and Z-ring chains. Affordable alternative to two-piece tools; made in Italy.

€10.77 €18.83

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

-€37.17

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€65.06 €102.23

-€11.50

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€44.69 €56.19

-€56.96

REGINA Type 7 Chain Breaker — 1/2", 5/8", 3/4" pitch, Black

Precision tool that supports outer plates for complete pin removal; fits 1/2", 5/8" and 3/4" pitch chains, including O-ring types.

€74.65 €131.61

Type 7 Chain Breaker Replacement Pin — 1/2" pitch, 5/8" pitch, 3/4" pitch

-€5.53

REGINA Type 7 Chain Breaker Replacement Pin — 1/2" pitch, 5/8" pitch,...

Replacement pin for chain breakers. Fits 1/2", 5/8" and 3/4" pitch chains.

€7.25 €12.78

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55
Out of Stock

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58
Out of Stock

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS