TOOLS

-€36.91

JIMS 5-Speed Shifting Assembly — Silver

Complete shifter assembly that reduces free play and installs with common hand tools. Made in the U.S.A.

€143.52 €180.43

-€28.42

JIMS Steering Head Bearing Race Tool — JIMS, Black

Precision tool removes and installs steering head bearing races on 1984–2016 Big Twin (except 2014–2016 Dressers), 1986–2016 XL and 1994–2002 Buell OEM frames; requires tool driver spacer and handle/driver.

€110.55 €138.97

Motor Stand — For Twin Cam A Motor, Blue, powder-coated

-€31.21

JIMS Motor Stand — For Twin Cam A Motor, Blue, powder-coated

Makes working on motors easier with better access. Made in the USA.

€121.35 €152.56

-€15.00

JIMS Driver Spacer Tool — Steering head, black

Works with a bearing race tool to remove and install bearing races with even, controlled taps.

€58.34 €73.34

-€26.09

JIMS Race and Bearing Handle Tool — Sprocket shaft fit, Black

Handle for installing and removing bearing races; works with compatible race tools. Durable, compact design.

€101.45 €127.54

-€22.64

JIMS Inner Cam Bearing Install Tool — inner bearing, black

Use to install inner cam bearings. Made in the U.S.A.

€88.03 €110.67

Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

-€35.15

JIMS Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

Presses the oil seal over the sprocket shaft into the case for accurate, damage-free installation. Made in the U.S.A.

€136.68 €171.83

-€64.51

JIMS Sprocket Shaft Bearing/Race/Seal Installation Tool — Black

Installs sprocket shaft bearing, race and seal on '84-'02 Big Twin. Precision fit for safe, damage-free installation. Made in the U.S.A.

€250.86 €315.37

Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

-€65.65

JIMS Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

Installs the flywheel assembly into the left crankcase Timken® bearing on '55–'76 XL and K. Optional sleeves sold separately for '86–'03 XL and '94–'03 Buell. Made in the U.S.A.

€255.31 €320.96

-€79.29

JIMS Mainshaft Bearing Race Tool — main shaft, transmission, black

Removes and installs the inner bearing race on the transmission mainshaft.

€308.34 €387.63

-€85.83

JIMS Swingarm Bushing Tool — Swingarm, Black

Precision tool for installing delicate silicone cleveblock bushings; presses on the outer sleeve and works with or without a press.

€333.77 €419.60

-€25.99

JIMS Cam or Piston Bushing Installer Drill Jig — Cam, Black

Installs bushings and drills dowel-pin holes to factory specs; includes #31 HSS jobber drill bit; made in the U.S.A.

€73.44 €99.43

-€15.69

JIMS Pinion Gear Nut Socket — Pinion gear

Socket for installing and removing pinion gear nuts. Made in the U.S.A.

€61.02 €76.71

-€57.85

JIMS Transmission Sprocket Locknut Wrench — Counter shaft, Black

Removes the hex nut at the end of the main drive gear; extra-long two-piece design with an inner collar for safer retention. Made in USA.

€224.98 €282.83

-€54.86

JIMS Pinion Bushing Puller — Pinion, cam cover, Black

Removes the pinion bushing from the cam cover in a single operation; use with a cam cover holder.

€213.38 €268.24

-€29.85

JIMS Clutch Hub Puller — Clutch hub, Black, Silver

Removes wet and dry clutch hubs without removing the clutch release rod; four bolts included for dry clutch removal; made in the U.S.A.

€116.08 €145.93

-€41.01

JIMS Shift Fork Gauge — Drum-type shifter, 4-speed, black

Checks alignment of Big Twin transmission shift forks. Made in the U.S.A.

€159.45 €200.46

-€16.98

JIMS Cam Chain Tensioner Tool — Cam

Unloads pressure on primary and secondary chain tensioners for easier cam assembly and disassembly. Includes instructions. Made in the U.S.A.

€66.05 €83.03

-€61.99

JIMS Camshaft Removal/Installation Tool — Front, Rear

Multi-function tool for removing and installing front and rear camshafts and ball bearings on Twin Cam 88 engines. Made in the U.S.A.

€241.08 €303.07

Sprocket Lock Tool — Crankshaft, Camshaft, Black

-€17.78

JIMS Sprocket Lock Tool — Crankshaft, Camshaft, Black

Locks camshaft and crankshaft sprockets for safe removal, replacement, and torquing of sprocket bolts. Includes instructions. Made in the U.S.

€69.16 €86.94

-€14.29

JIMS Wrist Pin Bushing — Standard, pair

Precision bronze wrist pin bushings machined to hold concentricity to less than .0002" with a lead-in edge for easy installation.

€55.57 €69.86

-€28.57

JIMS Clutch Hub Puller — Clutch hub, Black

Works on Big Twin sprockets, alternator covers and early XL clutches. Fits 3-, 5-, 10-finger and 45" hubs. Made in the U.S.A.

€111.14 €139.71

-€26.97

JIMS Top Nut Fork Socket — 35 mm

Tool for removing and installing top fork nuts; rubber-protected socket, clears most handlebars.

€104.89 €131.86

Balancer Shaft Bearing Remover — Kit, Black

-€48.93

JIMS Balancer Shaft Bearing Remover — Kit, Black

Safe, damage-free removal of balancer shaft bearings; pushes on the bearing outer diameter; removes bearings from the "B" motor case in one smooth motion; made in the USA.

€190.26 €239.19

-€7.81

JIMS Balancer Shaft Retention Pins — Flywheel assembly, silver

Locks into balancer shaft sprocket pinholes to prevent the balancer from turning out of sync with the flywheel. Use when servicing the flywheel assembly. Made in the U.S.A.

€30.39 €38.20

-€28.78

JIMS Piston Support Plate — JIMS 1164, Black

Non-marring flat plate for pushing piston bottoms during ring or cylinder installation. Made in the U.S.A.

€111.93 €140.71

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

-€73.52

JIMS Wrist Pin Bushing Reaming Tool — Wrist pin, 1726-1

Reams wrist pin bushings to the specified inner diameter. Can be used with rods in or out of the motor. Lead-in taper for easy use. Made in the U.S.A.

€285.92 €359.44

Inner Cam Bearing Go and No-Go Gauges — pair, silver

On sale!
-€18.34

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€71.39 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS