TOOLS

Cycle Dock — 120–160 mm tire width, zinc finish

-€84.37

K&L SUPPLY Cycle Dock — 120–160 mm tire width, zinc finish

Heavy-duty wheel chock with pivoting rocker for easy trailer or pickup loading. Includes mounting hardware; tie-downs recommended.

€328.09 €412.46

MC550 Multi-Lift MC/ATV Jack — 544 kg (1200 lb), 17 in, 16 in, Blue

-€118.83

K&L SUPPLY MC550 Multi-Lift MC/ATV Jack — 544 kg (1200 lb), 17 in, 16 in,...

Foot-operated valve and locks; locking neoprene casters. Minimum height 4-1/2". 1.5" square steel tubing.

€462.13 €580.96

-€13.76

K&L SUPPLY 6-in-1 Flywheel Puller — K&L SUPPLY, Steel, Metric

Compact 6-in-1 design with adapters for M10 x 1.25R, M14 x 1.5R, M16 x 1.5R, M18 x 1.5R, M24 x 1.0R and M27 x 1.0R.

€38.90 €52.66

-€82.41

K&L SUPPLY Adjustable Split Fork Seal Driver — Gold

Replaces fork seals without removing the inner fork tube; includes split driver plus 35/39/41 mm guides; fits stock Harley-Davidson® KYB and Showa forks.

€232.90 €315.31

Wheel Truing and Wheel Balance Stand — 14"–21" wheels, yellow zinc-plated

-€97.31

K&L SUPPLY Wheel Truing and Wheel Balance Stand — 14"–21" wheels, yellow...

Mounts to adjustable center cones or bearings; adjustable frame rails; balances and trues 14"–21" motorcycle wheels.

€378.43 €475.74

Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic Cat, Yellow

-€13.72
Out of Stock

SNO STUFF Clutch Holder — P-85, P-90, Comet 100C–108EXP, Polaris, Arctic...

Durable holder with a PVC-coated handle and precision laser-cut design for secure, comfortable use.

€38.76 €52.48

-€12.55
Out of Stock

SNO STUFF Clutch Holder — Ski-Doo, TRA, yellow, zinc plated

PVC-coated handle prevents scratches and adds comfort. Precision laser-cut design for accurate, reliable engagement.

€35.44 €47.99

-€12.14
Out of Stock

SNO STUFF Clutch Holder — Yamaha, YVXC, YPZ, YXR, Yellow, zinc-plated

PVC-coated handle prevents scratches and increases comfort; precision laser-cut design for secure clutch holding.

€34.33 €46.47

-€51.20

K&L SUPPLY Magnetic Base For Dial Indicators — Black

Stable magnetic base with flexible arm and on/off knob for use with dial indicator gauges.

€144.70 €195.90

-€8.55
Out of Stock

K&L SUPPLY Carburetor Sync Adapters — M6 x 0.85, 53 mm, set of 2, silver

Practical tool that simplifies carburetor synchronization for smoother idle and improved throttle response.

€24.17 €32.72

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€64.77

K&L SUPPLY Universal Swingarm Stand — Gold finish

Stable, easy-to-use swingarm stand with adjustable adapters and a removable handle.

€251.91 €316.68

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

-€84.64

K&L SUPPLY Sport Jack Adapter — Center Jack, Off-Road Bike, Silver

Raises sportbikes by lifting at the frame to avoid fairing damage; stable, low-profile support for maintenance.

€239.17 €323.81

Trike Adapter — 499 kg (1,100 lb), MC465 Jack, Gold

-€29.06
Out of Stock

K&L SUPPLY Trike Adapter — 499 kg (1,100 lb), MC465 Jack, Gold

Adapter designed for Harley-Davidson® trike models. Keeps weight centered for safer lifting and support.

€82.10 €111.16

$OptiMate™ Battery Lead Adapter — 101.5 cm (40\"), 12 V, 2.5 mm plug$

-€4.76

TECMATE OptiMate™ Battery Lead Adapter — 101.5 cm (40\"), 12 V, 2.5 mm...

Adapter cable with 1/4" ringlets and sealed DC socket for heated apparel, 16 AWG SPT-2W.

€10.20 €14.96

OptiMate 7 12V/24V Battery Charger — 12V, 24V, Blue

-€38.89
Out of Stock

TECMATE OptiMate 7 12V/24V Battery Charger — 12V, 24V, Blue

Automatic 8-step charger and maintainer for 12V and 24V deep-cycle lead-acid batteries; saves batteries from 0.5V, temperature compensation, IP54 weatherproof.

€111.07 €149.96

OptiMate™ 20 W Solar DUO Charger/Maintainer — 12 V controller, 14' cable

-€41.37

TECMATE OptiMate™ 20 W Solar DUO Charger/Maintainer — 12 V controller,...

Smart 20 W solar charger for 12 V batteries with a 12 V controller, low-volt start, and 14' separation cable; travel kit included.

€116.92 €158.29

-€20.24
Out of Stock

TECMATE OptiMate 5 6V/12V — 6V 4A, 12V 3A, Blue

8-step sealed charger and maintainer for 6V and 12V lead-acid batteries. Automatic charging, recovery from 0.5V, state-of-health test, and efficient 24/7 maintenance.

€57.22 €77.46

OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

-€55.53
Out of Stock

TECMATE OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

Four independent charging banks that automatically adapt to lead-acid and lithium LFP batteries; designed for workshop use and long-term maintenance.

€156.93 €212.46

-€101.63
Out of Stock

TECMATE OptiMate Pro-4 DUO — 4 charging banks, 12V 5A

Automatic diagnostic charger for four batteries with independent banks; activates new batteries, saves deeply discharged units, and runs state‑of‑health tests. Replaceable output cords and service‑oriented design.

€397.66 €499.29

-€1.07

K&L SUPPLY 4-in-1 Valve Stem Repair Tool — Silver

Compact 4-in-1 tool inserts and removes valve cores and repairs inner and outer valve stem threads.

€3.01 €4.08

-€8.49
Out of Stock

K&L SUPPLY Spoke Wheel Weight Remover Tool — Brass

Allows the tech to place the split tang between rim and weight, then tap it off the nipple with a spoke wheel weight hammer.

€24.05 €32.54

-€19.20
Out of Stock

SNO STUFF Clutch Holder — Brass, for Arctic Cat

Holds the stationary clutch sheave for easy assembly and disassembly. Bench-mountable or clamp in a vice. Use with a jam nut and spider tool.

€54.28 €73.48

Secondary (Driven) Clutch Puller — Universal, Brass, fits '81-up reverse cam secondary clutches

-€21.89
Out of Stock

SNO STUFF Secondary (Driven) Clutch Puller — Universal, Brass, fits...

Universal puller for '81-up reverse cam secondary clutches with button or roller covers. Easy, reliable removal.

€61.90 €83.79

Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and 6-tower; Comet 100C/101C/102C/108C/108EXP; Polaris P85/P90

-€30.35

SNO STUFF Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and...

Detachable bar accepts a 1/2" drive torque wrench for re-torquing; long bar for extra leverage; fits Arctco 102C/108C, Arctic Cat 9- & 6-tower, Comet 100C/101C/102C/108C/108EXP, Polaris P85/P90.

€85.77 €116.12

-€11.36
Out of Stock

SNO STUFF Clutch Alignment Tool — Polaris, P-85, Silver

Helps keep clutch and belt aligned to avoid damage and costly repairs. Easy to use and maintains machine performance.

€32.13 €43.49

-€8.65
Out of Stock

SNO STUFF Clutch Alignment Tool — Ski‑Doo, ZX/F2000/S2000, Brass

Helps keep clutch and belt aligned to avoid damage and expensive repairs. Easy to use and keeps machine running in top condition.

€24.42 €33.07

-€12.86
Out of Stock

SNO STUFF Clutch Alignment Tool — CK-3, Ski-Doo, brass

Helps keep clutch and belt aligned to prevent damage and costly repairs. Easy to use and keeps the machine running in top condition.

€36.34 €49.20

-€8.28
Out of Stock

SNO STUFF Clutch Alignment Tool — YVXC, Yamaha, Brass

Helps keep clutch and belt aligned to prevent damage and costly repairs. Easy to use and maintains equipment performance.

€23.41 €31.69

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS