TOOLS

-€2.29
Out of Stock

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73
Out of Stock

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€8.56
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59
Out of Stock

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83
Out of Stock

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38
Out of Stock

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

-€24.51
Out of Stock

CYCRA Moto Stand — 12" L, 12" W, Blue

Service stand with molded rubber top, built-in tool tray, wide guide edges and composite plastic legs.

€69.27 €93.78

$Moto Stand — 30.5 cm (12\"), Green$

-€24.51
Out of Stock

CYCRA Moto Stand — 30.5 cm (12\"), Green

Service stand with molded rubber top, large built-in tool tray, wide guide edges and composite plastic legs for stable, low‑maintenance support.

€69.27 €93.78

-€5.17
Out of Stock

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€2.52
Out of Stock

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€12.12
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

Replacement Fuel Injector Pigtail — For EV1 fuel injector, Black, Gray

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For EV1 fuel injector,...

Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.

€16.70 €22.61

Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black oxide

-€16.26
Out of Stock

MOTION PRO Spanner Nut Socket — 1/2" drive, motor mount/swingarm, black...

Durable spanner nut socket for installing and removing castle lock nuts. Heat-treated high carbon steel with laser-etched ID. Lifetime limited warranty.

€45.97 €62.23

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black

Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.

€16.70 €22.61

-€1.44
Out of Stock

MOTION PRO JIS Cross-Head Hex-Drive Bits — #2, Black

Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.

€4.03 €5.47

Ringer® Fork Seal Driver — 39 mm fork leg fitment, Blue & Silver anodized

-€14.78
Out of Stock

MOTION PRO Ringer® Fork Seal Driver — 39 mm fork leg fitment, Blue &...

Knurled locking ring for a secure, no‑slip grip; innovative pinless design; black e-coat with laser‑engraved markings; perfectly weighted to install seals. Limited lifetime warranty.

€41.78 €56.56

Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

-€5.17
Out of Stock

MOTION PRO Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

Rubber-coated, bendable retrieval tool with a low-profile magnetic tip for tight spaces.

€14.64 €19.81

-€2.07
Out of Stock

MOTION PRO Chain Brush — Blue, Double-ended

Double-ended brush with a three-sided head and long bristles for hard-to-reach areas; ideal for cleaning chains and related components.

€5.84 €7.91

-€139.63
Out of Stock

MOTION PRO Pivot Suspension Vise — Black, Blue

Clamp that secures forks and shocks for oil changes, re-valving, and seal work. Rotating head, adjustable jaws, and a movable fluid pan streamline service.

€394.63 €534.26

-€6.65
Out of Stock

MOTION PRO 18 mm Spark Plug Socket — Silver

Thin-wall 18 mm spark plug socket for low-clearance plug cavities. Drives with ratchet, wrench, kit bar, or a Phillips screwdriver through the top hole.

€18.81 €25.46

-€10.95
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.10–0.13 mm, 6 pack, gray

Allows accurate tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€30.92 €41.87

Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20 mm, Gray

-€10.95
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20...

Precision tool for tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€30.92 €41.87

Folding Sag Scale II — 28-3/8" extended, 15-3/4" folded, Blue anodized

-€16.41
Out of Stock

MOTION PRO Folding Sag Scale II — 28-3/8" extended, 15-3/4" folded, Blue...

Compact folding sag scale reads 0–120 mm, folds to 15-3/4" for easy storage and precise sag setup.

€46.34 €62.75

-€8.27
Out of Stock

MOTION PRO Mini Bleeder — 10 mm, anodized blue

All-in-one wrench and bleeder for fast brake and hydraulic clutch bleeding. Internal check valve and multi-position handle for tight spaces.

€23.39 €31.66

T-6 Combo Lever Adapter — 27 mm, Blue anodized

-€9.22
Out of Stock

MOTION PRO T-6 Combo Lever Adapter — 27 mm, Blue anodized

Converts the T-6 Combo Lever™ into a 3/8" driver — 3/8" male, 1/4" female; rated to 90 lb/ft.

€26.05 €35.27

Valve Stem Seal Install Tool Set — 4 mm, 4.5 mm, 5 mm, 5.5 mm, Blue anodized

-€14.49
Out of Stock

MOTION PRO Valve Stem Seal Install Tool Set — 4 mm, 4.5 mm, 5 mm, 5.5 mm,...

Contoured handle cradles and protects the seal lip while directing force to the outer rim.

Set of four pilot sizes: 4 mm, 4.5 mm, 5 mm, 5.5 mm for most modern off-road motorcycles and ATVs.

Slim profile for easy access to valve guides in compact heads; rounded tip prevents damage during installation.

€40.94 €55.43

-€8.51
Out of Stock

MOTION PRO T-6 Combo Lever Adapter — 9.5 mm (3/8") drive

Converts the T-6 Combo Lever™ into a compact socket driver with coin knurling and lightening holes for easier hand turning.

€24.03 €32.54

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS