TOOLS

-€2.29

MOTION PRO Dual Drive Mini T-Handle Tool — 1/4" drive, 165.1 mm (6-1/2")

T-handle and shaft drive for tight access; works with sockets, hex drives and crow's foot adapters; compact and durable.

€6.49 €8.78

Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

-€42.73

MOTION PRO Ti Prolight™ Wrench Set — 8 mm, 10 mm, 12 mm, 14 mm, Silver

Extremely lightweight — less than one quarter the weight of a standard wrench. Exclusive optimized design with an ergonomic handle. Not intended for everyday shop use.

€120.75 €163.48

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench, Motion Pro® Deep Socket

-€1.48

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, Motion Pro® T-Handle Wrench,...

Dual-purpose hex bit with rubber o-ring to hold the bit securely in place.

€4.17 €5.65

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

-€5.17

MOTION PRO Tri Drive Mini T-Handle Kit — 6.4 mm (1/4"), 152.4 mm (6")

Compact T-handle kit for quick installation and removal of fasteners; includes 8, 10, 12, 13 mm sockets.

€14.64 €19.81

-€3.44

MOTION PRO Motospade™ — Blue

Compact two-ended cleaning tool with brush and pick plus a curved spade for removing mud and debris. Includes hanging hole for easy storage.

€9.74 €13.18

-€2.52

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€1.18

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€12.12

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

Replacement Fuel Injector Pigtail — For EV1 fuel injector, Black, Gray

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For EV1 fuel injector,...

Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.

€16.70 €22.61

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black

Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.

€16.70 €22.61

Fuel Injector Cleaner Pigtail — fits HON-F2 injectors, black

-€5.91
Out of Stock

MOTION PRO Fuel Injector Cleaner Pigtail — fits HON-F2 injectors, black

Connects to most OEM HON-F2 fuel injectors for cleaning; pigtail only.

€16.70 €22.61

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

-€1.44
Out of Stock

MOTION PRO JIS Cross-Head Hex-Drive Bits — #2, Black

Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.

€4.03 €5.47

Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

-€5.17
Out of Stock

MOTION PRO Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

Rubber-coated, bendable retrieval tool with a low-profile magnetic tip for tight spaces.

€14.64 €19.81

Fork Cap Tool for Showa SFF — 50 mm fork cap, 1/2" square drive, Blue anodized

-€13.31

MOTION PRO Fork Cap Tool for Showa SFF — 50 mm fork cap, 1/2" square...

Removes fork caps and compression cartridges on Showa SFF forks. Outer ring fits 50 mm octagonal caps and clamps in a vise; inner body holds the cartridge for safe removal. 1/2" square drive. Lifetime limited warranty.

€37.61 €50.92

-€2.53

MOTION PRO Chain Brush — Blue, Double-ended

Double-ended brush with a three-sided head and long bristles for hard-to-reach areas; ideal for cleaning chains and related components.

€7.17 €9.70

-€139.63

MOTION PRO Pivot Suspension Vise — Black, Blue

Clamp that secures forks and shocks for oil changes, re-valving, and seal work. Rotating head, adjustable jaws, and a movable fluid pan streamline service.

€394.63 €534.26

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

-€1.48
Out of Stock

MOTION PRO Fork Seal Bullet Set — 41 mm, Blue

Protects fork seals and wipers; set of eight marked bullets (36–49 mm) for inverted forks.

€4.17 €5.65

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS