TOOLS

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

-€3.44

MOTION PRO Motospade™ — Blue

Compact two-ended cleaning tool with brush and pick plus a curved spade for removing mud and debris. Includes hanging hole for easy storage.

€9.74 €13.18

-€2.52

MOTION PRO Mini Spring Hook — Blue, Silver

For use on exhaust, seat and tank springs, cotter pins and side stand springs. Ergonomic handle and compact size for easy access.

€7.11 €9.63

-€1.18

MOTION PRO Replacement D-Shaped Bit — D-shaped, Silver, 08-0242

Replacement d-shaped bit with durable nickel pewter finish. Compatible with part #08-0229.

€3.33 €4.51

Spanner Nut Socket — 3/8" drive, Black oxide

-€15.38

MOTION PRO Spanner Nut Socket — 3/8" drive, Black oxide

Designed for reliable removal and installation of spanner (castle) lock nuts. Heat-treated for durability and backed by a lifetime limited warranty.

€43.45 €58.83

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HYB Fuel Injector, Black

Replacement connector for fuel injectors. Connector only; wiring and adapters sold separately.

€16.70 €22.61

-€12.12

MOTION PRO Spanner Nut Socket — 1/2" drive, Swingarm, Black oxide

Tool for removing and installing spanner (castle) lock nuts. Laser-etched ID, heat-treated high-carbon construction, lifetime limited warranty.

€34.26 €46.38

Replacement Fuel Injector Pigtail — For EV1 fuel injector, Black, Gray

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For EV1 fuel injector,...

Connector lead for fuel injector cleaning systems. Connector only; wiring harness not included.

€16.70 €22.61

-€5.91
Out of Stock

MOTION PRO Replacement Fuel Injector Pigtail — For HV2 fuel injector, Black

Replacement pigtail connector for use with fuel injector cleaners. Pigtail only; sold individually.

€16.70 €22.61

Fuel Injector Cleaner Pigtail — fits HON-F2 injectors, black

-€5.91
Out of Stock

MOTION PRO Fuel Injector Cleaner Pigtail — fits HON-F2 injectors, black

Connects to most OEM HON-F2 fuel injectors for cleaning; pigtail only.

€16.70 €22.61

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€5.86

WOODY'S Spring Tool — 25.4 cm (10") , silver

Provides better leverage to push, pull or twist springs into place
Looped handle for a comfortable grip
Made in the U.S.A.

€16.51 €22.37

-€1.44
Out of Stock

MOTION PRO JIS Cross-Head Hex-Drive Bits — #2, Black

Fits JIS cross-head screws to reduce cam-out and prevent screw-head damage; also works on Phillips screws.

€4.03 €5.47

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60 kg capacity

-€29.98
Out of Stock

PEDRO'S Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60...

Portable folding repair stand with three-point base, 360° clamp for tubes up to 65 mm, height 1,007–1,850 mm, supports 60 kg.

€299.77 €329.75

Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

-€5.17
Out of Stock

MOTION PRO Magnetic Pick Up Tool — 18 in (45.72 cm), Blue

Rubber-coated, bendable retrieval tool with a low-profile magnetic tip for tight spaces.

€14.64 €19.81

Fork Cap Tool for Showa SFF — 50 mm fork cap, 1/2" square drive, Blue anodized

-€13.31

MOTION PRO Fork Cap Tool for Showa SFF — 50 mm fork cap, 1/2" square...

Removes fork caps and compression cartridges on Showa SFF forks. Outer ring fits 50 mm octagonal caps and clamps in a vise; inner body holds the cartridge for safe removal. 1/2" square drive. Lifetime limited warranty.

€37.61 €50.92

-€139.63

MOTION PRO Pivot Suspension Vise — Black, Blue

Clamp that secures forks and shocks for oil changes, re-valving, and seal work. Rotating head, adjustable jaws, and a movable fluid pan streamline service.

€394.63 €534.26

-€10.95
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.10–0.13 mm, 6 pack, gray

Allows accurate tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€30.92 €41.87

Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20 mm, Gray

-€10.95
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20...

Precision tool for tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€30.92 €41.87

-€6.21

MOTION PRO Side Case Puller — Silver Anodized, Right

Removes the right side-case cover on compatible Harley-Davidson models; kit includes bracket, puller bolt and set screws. Made in USA.

€17.53 €23.74

-€9.51
Out of Stock

MOTION PRO Springer Fork Compression Tool — Springer front fork, Silver

Assists in disassembly and assembly of springer-type front forks on Harley-Davidson motorcycles. Made in the USA.

€26.88 €36.39

-€19.09

WOODY'S Grinding Wheel — 1" x 6", 1/2" or 1" arbor, Green, Red

Special grinding wheel for sharpening carbide runners and studs. Fits 1/2" or 1" arbor; 1" x 6".

€53.94 €73.03

Black Silicon Grinding Wheel — 4-1/2" x 1/4" x 7/8", 7/8" mounting handle

-€3.43

WOODY'S Black Silicon Grinding Wheel — 4-1/2" x 1/4" x 7/8", 7/8"...

On-machine sharpening wheel for runners and studs; fits most hand grinders and features a 7/8" mounting handle.

€9.72 €13.15

Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH, KP, SD, SF, SK, ST, YH, YJ impellers

-€2.06

SOLAS Impeller Installation Tool — Fits HA, KA, KD, KE, KF, KG, KH,...

Makes impeller installation quick and simple; match tool application to impeller series to find the proper tool.

€6.57 €8.63

-€1.38

SOLAS Impeller Installation Tool — SOLAS, WR003, for YA Impellers

Makes impeller installation quick and accurate; match tool application to the impeller series.

€4.39 €5.77

Impeller Installation Tool — fits YB, YD (YD series Super Camber Impellers I, J, K, X)

-€1.26
Out of Stock

SOLAS Impeller Installation Tool — fits YB, YD (YD series Super...

Tool that simplifies impeller installation; match tool application to impeller series for correct fitment.

€4.02 €5.28

-€2.27
Out of Stock

SOLAS Impeller Installation Tool — KC Impellers

Fast, accurate tool for impeller installations. Match the tool application to the impeller series to select the correct tool.

€7.20 €9.47

shop by category

TOOLS

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS