TOOLS (64)

-€52.26

MOOSE OFFROAD FOUR WHEEL Aluminum Ramp — 180 cm x 122 cm, Bi-Fold

Durable, lightweight ramp with a weather-resistant finish. Includes E-Z grip rubber truckrests and nylon straps. Folds for compact storage.

€147.69 €199.95

-€66.66

JIMS Crankshaft Bearing Tool — Crankcase, Right, Black

Removes and installs bearings without damaging the case. Ideal for shop use.

€259.18 €325.84

-€47.93

JIMS Wrist Pin Tool — Black, Blue, Silver, JIMS 1276

A handheld tool that simplifies wrist pin removal and installation for one-person operation. Made in the U.S.A.

€186.39 €234.32

-€56.67

JIMS Inner Cam Bearing Removal Tool — Cam, crankcase, black

Removes inner cam bearings without damaging the crankcase. Prevents rollers from falling into the crankcase. Includes instructions. Made in the United States.

€220.39 €277.06

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

1-1/2" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 1-1/2" x 6' (38.1 mm x 183 cm), 600 lb, Red

-€7.28

PARTS UNLIMITED 1-1/2" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist —...

Heavy-duty tie-downs with built-in assist, durable webbing, and secure nonslip buckles for reliable cargo control.

€20.58 €27.86

Out of Stock

JIMS Cylinder Torque Plate Kit

The Cylinder Torque Plate Kit is designed for precision boring and honing of late-model aluminum cylinders, simulating stress conditions and ensuring optimal performance.

€693.42

-€25.10

JIMS Castlenut Socket — for inverted forks, black

Adapts a wrench to remove castle nuts and access the shock cylinder. Made in USA.

€97.59 €122.69

Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

-€80.01

JIMS Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

Secures rods during reaming or honing of wrist pin bushings. Made in the USA. Fits most V-Twin and Buell Blast applications.

€226.11 €306.12

-€10.05
Out of Stock

JIMS Rod Alignment Tool — 114.3 mm (4-1/2"), Silver

Checks rod straightness without removing rods from the cases. Made in the U.S.A.

€39.09 €49.14

-€12.84

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10', 1", 400 lb, Black

Quick push-button retracting ratchet stores excess webbing inside the housing for a clean, secure setup; zinc-plated metal components with a plastic-coated handle for comfortable use.

€36.31 €49.15

-€12.84

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 400 lb...

Quick, retracting ratchet straps that keep excess webbing contained. 400 lb working load limit; 1,200 lb breaking strength.

€36.31 €49.15

-€41.79

JIMS Alternator Rotor Tool — 45A

Must-have puller for 45A charging systems; protects sprocket shaft threads and works with Harley-Davidson® alternators.

€162.53 €204.32

-€12.84

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 181 kg (400...

Retracting ratchets set up in seconds and keep excess webbing neatly housed; zinc-plated metal components and plastic-coated handle.

€36.31 €49.15

-€25.10

JIMS Optional Seal Driver — Main shaft, Transmission, 4-Speed, Black

Optional drivers for use with the primary seal installation tool to help install seals.

€97.59 €122.69

Brake Caliper Piston Remover — Front and rear 4-piston calipers, gray, red

-€28.87

JIMS Brake Caliper Piston Remover — Front and rear 4-piston...

Removes and holds caliper pistons square for safe seal and wiper installation on 4-piston front and rear calipers.

€112.27 €141.14

-€80.40

JIMS Wrist Pin Bushing Reaming Tool — wrist pin, Gray

Reams wrist pin bushings to the proper inner diameter. Use with rods in or out of the motor; lead-in taper for easy entry.

€312.66 €393.06

-€92.59

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€360.09 €452.68

-€14.28

S&S CYCLE Crankcase Oil Passage Drilling Jig — Crankcase oil passage, gray

Precision drilling jig for preparing oil passages; used to install S&S® oil pumps on early motor cases. Made in the U.S.A.

€55.52 €69.80

Out of Stock

JIMS Fork Seal and Cap Installer

The Fork Seal and Cap Installer is designed to install fork and dust seals while preventing scratches on fork tubes. Proudly made in the U.S.A.

€111.36

-€26.87

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€104.50 €131.37

-€32.72

KIMPEX Slide Puller — Silver

Versatile tool for removing internal parts without damage. Non-marring contact points. Durable and easy to use.

€92.45 €125.17

-€27.36
Out of Stock

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€106.40 €133.76

Out of Stock

JIMS Hardware Organizer M8

The Hardware Organizer M8 by JIMS is designed for Milwaukee Eight models, offering a practical solution for organizing hardware during disassembly and reassembly.

€131.41

-€6.95

MOOSE OFFROAD HARD-PARTS Shock Spanner Tool — Shock

Tool for adjusting hard-to-reach rear shock lockout collars; brass-tipped, curved tip, heavy-duty handle.

€19.65 €26.60

-€50.24

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€195.38 €245.62

-€21.42

MOOSE OFFROAD HARD-PARTS Pinion Bearing Tool — Black

Removes and reinstalls the pinion bearing nut in Yamaha differentials for precise, damage-free service.

€60.53 €81.95

-€19.00

MOOSE OFFROAD HARD-PARTS Pinion Bearing Lock Nut Tool — black

Removes and reinstalls 4-prong pinion bearing lock nuts on Yamaha 4-wheelers.

€53.72 €72.72

Out of Stock

JIMS Pinion Gear Locker Tool

The Pinion Gear Locker Tool allows for secure locking of the pinion gear during nut torquing, ensuring a reliable fit.

€196.82

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS