TOOLS (15)

On sale!
-€8.87

MOOSE OFFROAD HARD-PARTS T-Stand — Rear axle, 29 cm, Black

Heavy-duty stand that won't tip while you wash your bike or park on soft ground; sized per application for a secure pin fit and with no removable parts.

€25.08 €33.95

-€7.96

EPI Clutch Puller — Ski-Doo, Brass

Precision-machined puller for accurate clutch removal. Heat-treated construction for lasting strength. Individually packaged with instructions.

€30.94 €38.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

T-Stand — 32 cm (12-1/2"), rear axle, Red

-€14.88

MOOSE OFFROAD HARD-PARTS T-Stand — 32 cm (12-1/2"), rear axle, Red

Stable heavy-duty stand that resists tipping during washing or on soft ground. Sized per application with a snug-fitting pin for reliable fitment. No removable parts to lose. Made in the U.S.A.

€27.07 €41.95

-€32.46

CRUZTOOLS RoadTech™ TR2 Tool Kit for Triumph Motorcycles — Roll-Up, Metric

Compact roll-up tool kit with torx and hex keys, sockets, wrenches and roadside essentials for Triumph motorcycles.

€91.84 €124.30

Belt Removal Tool — For Arctic Cat models with Boss secondary clutch, gold

-€1.73

EPI Belt Removal Tool — For Arctic Cat models with Boss secondary...

Tool for opening secondary clutches to remove drive belts on snowmobiles. Easier to use than OEM tools; stores compactly.

€6.68 €8.41

$T-Stand — 30 cm (11-3/4\"), rear axle, Black$

On sale!
-€7.56

MOOSE OFFROAD HARD-PARTS T-Stand — 30 cm (11-3/4\"), rear axle, Black

Heavy-duty stand sized per application for a snug axle-pin fit; won’t fall off when moving the bike; no removable parts.

€21.39 €28.95

-€5.73

MOOSE OFFROAD HARD-PARTS Multi Tool — Folding, Combination, Gray

Compact folding multi tool stored in a nylon pouch with belt attachment. Includes hex wrenches, 1/4" drive fitting, sockets, open-end wrenches, and screwdrivers.

€16.22 €21.95

-€36.57

EPI Clutch Bushing Tool Kit — Polaris, Black, Chrome

Tool kit for removing and installing clutch bushings on primary and secondary clutches. Requires piston pin puller 3801-0313 (sold separately). Not compatible with EBS clutches with one- or two-way bearings.

€142.22 €178.79

-€7.96

EPI Piston Pin Puller Tool — Black, Silver

Removes 12–20 mm piston pins without damage; includes 14 mm and 17 mm plungers. Use with clutch bushing installation kit to speed clutch rebuilds.

€30.94 €38.90

-€26.90

MOOSE OFFROAD HARD-PARTS Aluminum Bike Stand — 43 cm (17"), silver

Stable bike stand with arched base, removable tray, anti-slip platform pad, 10" x 11" top, and oil drain hole.

€76.05 €102.95

Out of Stock

STAHLWILLE Insert Tool

The Insert Tool is essential for accurately inserting rings, crafted from high-quality materials for durability.

€25.58

-€21.52

EPI Clutch Compression Tool — Polaris, powder-coated

Allows one person to compress clutches for service, remove and install helixes, change springs and perform maintenance.

€83.66 €105.18

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€28.21

MOOSE OFFROAD HARD-PARTS Aluminum Bike Stand — 43 cm (17"), Black

Sturdy aluminum stand with arched base, removable tray, anti-slip pad and 10" x 11" top.

€79.74 €107.95

On sale!
-€6.68

STAHLWILLE Insert Tool — 17 mm, Steel

Compact tool for installing and removing threaded inserts with consistent alignment and control.

€18.90 €25.58

-€21.52

EPI Clutch Compression Tool — Can-Am, Powder-Coated

Enables one person to compress clutches for service, remove and install helixes, change springs, and perform maintenance.

€83.66 €105.18

$Moto Stand — 30.5 cm (12\") length, Black$

-€20.45

CYCRA Moto Stand — 30.5 cm (12\") length, Black

Molded rubber top with countersunk area for rivets, large built-in tool tray, wide guide edges, composite plastic legs.

€57.78 €78.23

On sale!
-€7.97

STAHLWILLE Insert Tool — Metric

Precision ring insert tool for consistent seating and faster assembly.

€22.55 €30.52

-€11.19

EPI Clutch Puller — Polaris, Brass

Precision-machined puller engineered for maximum strength; individually packaged with instructions.

€43.50 €54.69

$Moto Stand — 12\" , Orange$

-€20.45

CYCRA Moto Stand — 12\" , Orange

Low-profile service stand with molded rubber top, built-in tool tray, wide guide edges and composite legs.

€57.78 €78.23

Insulated Ratchet Set — Orange, Red, Set

-€96.31

WERA Insulated Ratchet Set — Orange, Red, Set

Insulated Zyklop VDE ratchets, sockets and extensions tested for safe use up to 1000 volts. 80-tooth fine-toothed ratchet, slim ergonomic grip and compact textile box with rotating socket holders.

€235.32 €331.63

-€10.54

EPI Clutch Holding Tool — Fits Polaris 550 2014–2016, Silver

Secures clutch assemblies for maintenance; fits Polaris 550 2014–2016, CT Tech Powerbloc PB-50/PB-80 and Trailbloc ATV clutches.

€40.99 €51.53

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€20.45

CYCRA Moto Stand — 12" (30.5 cm), Red

Stable maintenance platform with a molded rubber top, large built-in tool tray, wide guide edges and composite plastic legs.

€57.78 €78.23

-€4.14

MOTION PRO Torx Bit Set — T25/T30, T40/T45, 1/4" drive fit

Rubber O-ring secures double-ended Torx bits. Sizes T25/T30 and T40/T45. Fits 1/4" drive with 5/16" socket or 5/16" T-handle. Compatible with Motion Pro MP08-161.

€11.69 €15.83

Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris 72–present; excl. '11–'12 900 RZR XP 4x4 & '12 900 RZR XP 4 4x4), Blac

-€18.28

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris...

Fits P85 and P90 clutches on select Polaris ATVs and snowmobiles (1972–present). Essential for servicing or rebuilding clutches. Compare to Polaris OEM #2870338.

€51.67 €69.95

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

-€4.43

BIKESERVICE T-Handle Speed Ring Set — 12.7 mm ID, 80 mm length, Black

Improves T-handle rotation and reduces hand-to-shaft friction for faster fastener removal and positioning.

€12.52 €16.95

-€22.20

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85 and P90 clutches, Black

Tool for removing and installing spider nuts on Polaris P85 and P90 clutches. Essential for clutch service and rebuilds; use with part# 3803-0173.

€62.75 €84.95

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS