HARLEY

Handlebar ETC Grip Extension — Raw finish

KHROME WERKS Handlebar ETC Grip Extension — Silver

Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.

€12.87

SW-MOTECH ION Tank Ring — Black

Secure, easy-to-mount ring for ION tank bags. Quick removal for refueling, protects paintwork. Includes ring, instructions, and mounting hardware.

€25.88

Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€53.54

Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss

DRAG SPECIALTIES Buffalo Handlebar Clamp — Black

Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.

€50.09

SW-MOTECH PRO Tank Ring — Black

Secure QUICK-LOCK PRO Tank Ring with Fidlock magnetic guidance for one-step fastening. Pre-assembled top ring, adjustable alignment, quick release, and fiberglass-reinforced polyamide construction. Includes mounting hardware and instructions. Not compatible with EVO tank bags.

€35.59

Bag Bar Saddlebag Lid Supports — Silver, Pair

PRO-ONE PERF.MFG. Bag Bar Saddlebag Lid Supports — Silver

Eliminates sagging lids on stock leather saddlebags; easily removed for loading and unloading.

€10.76

CYCLE PERFORMANCE PROD. Mini Flex-Blanket™

Radiant, conductive heat shield that reflects 95% of infrared heat and delivers a durable high-temperature barrier.

€57.72

Extended Rim Lock Nuts — 8 mm x 1.25 mm, 13 mm hex head, Black gloss, Set

MOTION PRO Extended Rim Lock Nuts

Gloss finish with laser-engraved logo. 6061-T6 aluminum construction. Extra length for easy removal and installation. Fits 8 mm x 1.25 mm rim lock bolts. 13 mm hex head. Includes two nuts and two beveled washers.

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage, high-temperature ignition cable with heavy-walled FEP outer insulation and Posi-lock terminals for OE direct fitment.

€53.54

Rim Lock Damper — 1.6", 1.4" rim width, Black, Raw

MOTION PRO Rim Lock Damper

Reduces rim lock shifting and spoke stress; installs under common rear rim locks for improved wheel reliability.

Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€53.54

LiteLoc™ II Rim Lock — Rim width 1.6 in, with nut/beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic cover and nylon composite body lock the tire securely; recommended nut torque 10 lb/ft. Super light and impact resistant.

COBRA Detachable Luggage Rack — Black

Same quick-release mechanism as the back rests
Installs or removes in seconds
Works with or without back rests; requires stock or compatible hardware kit

€255.40

LiteLoc™ II Rim Lock — Rim width 1.85", with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Lightweight rim lock with a TPU cover for added shock absorption, precision-molded nylon body, and angled ribs to secure the tire bead. Recommended nut torque: 10 lb/ft.

6" Solo Luggage Rack — 6" (15 cm) wide, 11" (28 cm) long, Chrome

MOTHERWELL 6" Solo Luggage Rack

Compact luggage rack that follows the fender contour and mounts with existing holes. Made in the USA. Rear seat nut may be required (sold separately).

€166.90

Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.

€53.54

Handlebar Clamp — 1" clamping diameter, fits '74–'17 models, chrome

DRAG SPECIALTIES Handlebar Clamp — Silver

Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.

€19.22

LiteLoc™ II Rim Lock — 2.15" rim width, with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic polyurethane cover for improved shock absorption and pinch‑flat protection; precision molded nylon composite body; unique angled ribs for a secure fit; recommended nut torque 10 lb/ft.

7" Solo Luggage Racks — 7" width, 12" length, Chrome

MOTHERWELL 7" Solo Luggage Racks — Silver

Bigger, beefier solo luggage rack with a simple slotted clip-in mounting system; fits bikes with visible seat knobs.

€220.01

Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

MAGNUM SHIELDING Braided Spark Plug Wire

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€53.54

Shortshots Staggered Exhaust System — Chrome, 2-into-2 system

VANCE & HINES Shortshots Staggered Exhaust System

Short, high-style short-pipe exhaust with removable baffles, 1-3/4" headpipes and 220° coverage heat shields. Made in the U.S.A.

€473.73

MOTHERWELL 7\" Solo Luggage Rack

Bigger, beefier solo luggage rack engineered to match larger fenders. Outside rails use heavy .065" tubing; inside rails are 3/8" solid steel. Made in the USA, stainless steel finish.

€189.32

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€58.80

6" Solo Luggage Rack — 6" × 11", matte black

MOTHERWELL 6" Solo Luggage Rack — Black

Compact luggage rack for solo riders that mounts with existing holes and helps protect the fender finish. Made in the USA.

€164.56

Ignition Sensor Assembly — Harley Davidson®, Black, Gray

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly

Includes pickup, mounting plate and wires with connectors.

€45.52

Streamliner Luggage Rack — 10" x 6-1/4", Chrome, Polished

DRAG SPECIALTIES Streamliner Luggage Rack

Smooth luggage rack that replaces the stock license plate mount bar. Steel and billet aluminum construction for lasting strength. Includes rubber strips to protect the finish. Requires license plate relocation. Not for use with Tour-Pak®.

€161.57

Ignition Sensor Assembly — For Harley-Davidson, Black, Gray

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly

Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.

€45.52

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.

€65.74

PAUGHCO Distributor Hold Down

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€16.76

Shortshots Staggered Exhaust System

Short, fat, straight-pipe look with twin slash-cut ends; includes removable baffles and complete mounting hardware. Made in the U.S.A.

€473.73

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY