HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€54.25

Rear Master Cylinder Cover Gasket — Master cylinder, rear

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€4.88

Handlebar ETC Grip Extension — Raw finish

KHROME WERKS Handlebar ETC Grip Extension — Silver

Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.

€12.87

LINDBY Unibar® — Silver

Enhance your motorcycle with the Unibar®, featuring traditional OEM-style highway bars and durable construction.

€186.19

CHRIS PRODUCTS Rear Turn Signal Hardware

Direct OEM replacement mounting hardware in two finishes for motorcycle lighting assemblies.

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12 V, 12 Ah

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€112.03

Rear Master Cylinder Cover Gasket — rubber, 77360

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.72

Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss

DRAG SPECIALTIES Buffalo Handlebar Clamp — Black

Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.

€50.09

CHRIS PRODUCTS Rear Turn Signal Brackets — Mount

Rear Turn Signal Brackets available in chrome or black nickel finish, designed as direct OEM replacements.

€8.30

CHRIS PRODUCTS Turn Signal Standoff

Redesigned to accommodate new wiring configurations; provides secure mounting and easy installation.

€10.22

Extended Rim Lock Nuts — 8 mm x 1.25 mm, 13 mm hex head, Black gloss, Set

MOTION PRO Extended Rim Lock Nuts

Gloss finish with laser-engraved logo. 6061-T6 aluminum construction. Extra length for easy removal and installation. Fits 8 mm x 1.25 mm rim lock bolts. 13 mm hex head. Includes two nuts and two beveled washers.

Handguard LED Light Kit — 12V, 8W, Star Series

POWERMADD Handguard LED Light Kit — 12 V

Snap-in lighting modules that boost peripheral visibility and can be wired via the included waterproof switch. 200 lumens per module.

€42.97

Rim Lock Damper — 1.6", 1.4" rim width, Black, Raw

MOTION PRO Rim Lock Damper

Reduces rim lock shifting and spoke stress; installs under common rear rim locks for improved wheel reliability.

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver

S&S CYCLE 1200cc Conversion Kit for XL883 — Silver

Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.

€729.73

Diamond-Style Light Kits — 146 mm (5-3/4"), 12 V, 55 W, Halogen

DRAG SPECIALTIES Diamond-Style Light Kits — 12 V

Diamond-style reflector light kit replaces older-style lights and includes a bulb and wiring for straightforward installation; fits most housings.

€30.69

LiteLoc™ II Rim Lock — Rim width 1.6 in, with nut/beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic cover and nylon composite body lock the tire securely; recommended nut torque 10 lb/ft. Super light and impact resistant.

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€17.94

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

S&S CYCLE 1200cc Conversion Kit for XL883

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€843.80

Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm W, Red/Clear lens, Chrome housing

DRAG SPECIALTIES Red and Clear Skull Taillight

Skull-style taillight with die-cast frame for durable custom styling.

€34.00

LiteLoc™ II Rim Lock — Rim width 1.85", with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Lightweight rim lock with a TPU cover for added shock absorption, precision-molded nylon body, and angled ribs to secure the tire bead. Recommended nut torque: 10 lb/ft.

Replacement Taillight Lens — Clear/Red, Rear, P/N 12-0401

DRAG SPECIALTIES Replacement Taillight Lens

Top-quality replacement component for motorcycle lighting. Durable construction for reliable performance and simple installation.

€16.32

Handlebar Clamp — 1" clamping diameter, fits '74–'17 models, chrome

DRAG SPECIALTIES Handlebar Clamp — Silver

Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.

€19.22

LINDBY Front Multibar® — Black

The Front Multibar® offers durability, comfort, and easy installation, making it a perfect addition for your ride.

€236.17

LiteLoc™ II Rim Lock — 2.15" rim width, with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock

Thermoplastic polyurethane cover for improved shock absorption and pinch‑flat protection; precision molded nylon composite body; unique angled ribs for a secure fit; recommended nut torque 10 lb/ft.

Laydown Taillight Lens with Bottom Tag Lens — Red, Laydown mount, Rear

DRAG SPECIALTIES Laydown Taillight Lens with Bottom Tag Lens

Smooth, low‑profile lens that matches OEM rear angles and gives a clean custom look; requires LED bulb.

€19.23

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€58.80

Bullet Marker Lights — 3" L x 1" dia, front mount, amber lens, chrome housing

PRO-ONE PERF.MFG. Bullet Marker Lights

Supplemental bullet-style marker lights intended to supplement stock turn signals; not for use as running lights.

€42.77

LINDBY Unibar® — Silver

Enhance your motorcycle with the Unibar®, featuring traditional OEM-style highway bars and durable construction.

€186.19

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — Black, Silver

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€234.40

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.

€65.74

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY