+34 959 05 75 47 / +34 636 847 491
HARLEY
Subcategories
Active filters
DRAG SPECIALTIES
Rear Master Cylinder Cover Gasket — Master cylinder, rear
High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.
€4.88
KHROME WERKS
Handlebar ETC Grip Extension — Raw finish
Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.
€12.87
SADDLEMEN
Explorer™ Seat — 76 cm (30\"), Black
Comfort-focused touring seat with split-cushion ergonomics, SaddleHyde™ cover and SaddleGel™ cushioning for driver and passenger.
€321.64
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome
High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.
€53.54
DRAG SPECIALTIES
Rear Master Cylinder Cover Gasket — rubber, 77360
High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.
€5.72
DRAG SPECIALTIES
Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss
Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.
€50.09
MUSTANG
Wide Rear Seat — 11" x 13-1/2", Black
Expanded rear seat built for long-ride comfort and durability.
€228.94
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, Chrome
High-voltage, high-temperature ignition cable with heavy-walled FEP outer insulation and Posi-lock terminals for OE direct fitment.
€53.54
BELT DRIVES LTD.
Compensator Sprocket Kit — 25T, compensating
Patented three-piece design that requires no spring for smoother power delivery.
Lighter than the stock unit to reduce rotational mass and improve throttle response.
Manufactured in the U.S.A.
€101.28
S&S CYCLE
1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver
Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.
€729.73
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome
Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.
€53.54
S&S CYCLE
1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore,...
Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.
€843.80
MUSTANG
Textured Police Air Ride Seat — Black, 11-1/2" x 13-1/2"
Narrow-nosed, contoured Police Air Ride seat with lower-back support; optional wide rear cushion sold separately.
€272.98
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome
High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.
€53.54
DRAG SPECIALTIES
Handlebar Clamp — 1" clamping diameter, fits '74–'17 models,...
Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.
€19.22
MAGNUM SHIELDING
Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome
High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.
€53.54
WILD 1
Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...
Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.
€58.80
MUSTANG
Fastback™ Seat — 12" driver, 7" passenger, fits standard tank,...
Cut low for the rider with good back support; offers passenger comfort; expanded vinyl cover; made in the USA.
€353.42
STANDARD MOTOR PRODUCTS
Ignition Sensor Assembly — Harley Davidson®, Black, Gray
Includes pickup, mounting plate and wires with connectors.
€45.52
DRAG SPECIALTIES
Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...
Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.
€234.40
STANDARD MOTOR PRODUCTS
Ignition Sensor Assembly — For Harley-Davidson, Black, Gray
Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.
€45.52
WILD 1
Billet Aluminum Top Handlebar Clamp — Silver
Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.
€65.74
MOTOR TRIKE
Mechanical Reverse with Electronic Cut-Off Switch — Hydraulic...
Adds controlled mechanical reverse with an electronic cut-off switch to protect the transmission; clutch‑operated and plug‑and‑play with included tools and instructions.
€1,476.18
PAUGHCO
Distributor Hold Down — Chrome
Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.
€16.76
MOTOR TRIKE
Mechanical Reverse with Electronic Cut-Off Switch — Hydraulic...
Clutch-operated mechanical reverse kit with electronic cut-off switch. Plug-and-play harness, includes tools and instructions; no OEM exhaust modification required. Made in the U.S.A.
€1,106.47
S&S CYCLE
Cylinder Kit — 3.625" bore, 4.250" stroke
Complete cylinder kit with front and rear cylinders, gaskets and fasteners. 3.625" bore cylinders require crankcase machining.
€896.03
MOTOR TRIKE
Mechanical Reverse with Electronic Cut-Off Switch — Aluminum,...
Clutch-operated mechanical reverse with electronic cut-off switch for safe, plug-and-play parking assistance; includes harness and tools.
€1,383.69
COVINGTONS
Billet Aluminum Handlebar Clamp — 1" (25.4 mm), Black matte
CNC machined billet aluminum clamp that secures the full clamping area; fits most '99-'17 Harley-Davidson models with 3-1/2" on-center risers.
€97.26
MOTOR TRIKE
Mechanical Reverse with Electronic Cut-Off Switch — Aluminum,...
Mechanical reverse kit with electronic cut-off switch; clutch-operated, plug-and-play harness, installation tools included, made in the U.S.A.
€1,383.69
S&S CYCLE
Big Bore Cylinder Kit — 3.875" bore, 4.000" stroke, 95"...
High-performance cylinder kit that installs without case machining; includes pistons, rings and gaskets. Requires a skilled technician.
€1,004.07