HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm,...

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€54.25

KHROME WERKS Handlebar ETC Grip Extension — Raw finish

Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.

€12.87

CHRIS PRODUCTS Rear Turn Signal Hardware — Chrome

Direct OEM replacement mounting hardware in two finishes for motorcycle lighting assemblies.

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA,...

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€112.03

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 165 mm (6-1/2"), Chrome

High-voltage silicone spark plug wire with heavy-walled FEP insulation, posi-lock terminals, OE direct fitment, made in the USA.

€53.54

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss

Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.

€50.09

SPEED MERCHANT Skid Plate

Protect your Harley-Davidson with the handcrafted aluminum Skid Plate, designed for easy installation and durability.

€211.97

CHRIS PRODUCTS Rear Turn Signal Brackets — Mount

Rear Turn Signal Brackets available in chrome or black nickel finish, designed as direct OEM replacements.

€8.30

CHRIS PRODUCTS [object Object]

Redesigned to accommodate new wiring configurations; provides secure mounting and easy installation.

€10.22

SPEED MERCHANT Skid Plate

Protect your Harley-Davidson with the handcrafted aluminum Skid Plate, designed for easy installation and durability.

€151.57

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, Chrome

High-voltage, high-temperature ignition cable with heavy-walled FEP outer insulation and Posi-lock terminals for OE direct fitment.

€53.54

POWERMADD Handguard LED Light Kit — 12V, 8W, Star Series

Snap-in lighting modules that boost peripheral visibility and can be wired via the included waterproof switch. 200 lumens per module.

€42.97

DRAG SPECIALTIES Diamond-Style Light Kits — 146 mm (5-3/4"), 12 V, 55 W, Halogen

Diamond-style reflector light kit replaces older-style lights and includes a bulb and wiring for straightforward installation; fits most housings.

€30.69

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 248 mm (9-3/4"), 90°, Chrome

Braided OE-style spark plug wires with high-voltage silicone construction, FEP outer insulation, posi-lock terminals, and OE direct fitments — made in USA.

€53.54

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€17.94

Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm W, Red/Clear lens, Chrome housing

DRAG SPECIALTIES Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm...

Skull-style taillight with die-cast frame for durable custom styling.

€34.00

DRAG SPECIALTIES Replacement Taillight Lens — Clear/Red, Rear, P/N 12-0401

Top-quality replacement component for motorcycle lighting. Durable construction for reliable performance and simple installation.

€16.32

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 184 mm (7-1/4"), Chrome

High-voltage braided spark plug wires with FEP insulation, Posi-lock terminals and OE direct fit. Made in USA.

€53.54

Handlebar Clamp — 1" clamping diameter, fits '74–'17 models, chrome

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74–'17 models,...

Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.

€19.22

MAGNUM SHIELDING Braided Spark Plug Wire — 8 mm, 50 cm (19-3/4") , Chrome

High-voltage, high-temperature ignition cable with crystal-clear fluoropolymer insulation, posi-lock terminals, OE direct fit, made in the USA.

€53.54

SPEED MERCHANT Skid Plate

High-quality aluminum skid plate, designed for easy installation and superior protection.

€199.20

Laydown Taillight Lens with Bottom Tag Lens — Red, Laydown mount, Rear

DRAG SPECIALTIES Laydown Taillight Lens with Bottom Tag Lens — Red, Laydown...

Smooth, low‑profile lens that matches OEM rear angles and gives a clean custom look; requires LED bulb.

€19.23

$Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping diameter, raw finish$

WILD 1 Billet Aluminum Top Handlebar Clamp — 25.4 mm (1\") clamping...

Precision-machined billet aluminum top clamp that accepts stock risers and many custom bars. Mounting hardware included; made in the USA.

€58.80

SPEED MERCHANT Skid Plate

High-quality aluminum skid plate, designed for easy installation and superior protection.

€231.38

Bullet Marker Lights — 3" L x 1" dia, front mount, amber lens, chrome housing

PRO-ONE PERF.MFG. Bullet Marker Lights — 3" L x 1" dia, front mount, amber lens,...

Supplemental bullet-style marker lights intended to supplement stock turn signals; not for use as running lights.

€42.77

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — Harley Davidson®, Black, Gray

Includes pickup, mounting plate and wires with connectors.

€45.52

STANDARD MOTOR PRODUCTS Ignition Sensor Assembly — For Harley-Davidson, Black, Gray

Complete assembly includes pickup, mounting plate and pre-wired connectors for straightforward installation.

€45.52

WILD 1 Billet Aluminum Top Handlebar Clamp — Silver

Billet Aluminum Top Handlebar Clamp designed for durability, compatibility with stock risers, and includes hidden mounting hardware.

€65.74

PAUGHCO Distributor Hold Down — Chrome

Single-bolt distributor clamp compatible with most aftermarket distributors. Made in the USA.

€16.76

BURLY BRAND Brawler Kit For Dyna

Enhance your Dyna with the Brawler Kit for improved performance and style.

€382.06

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY