HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€65.64

Rear Master Cylinder Cover Gasket — Master cylinder, rear

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.90

CHRIS PRODUCTS Rear Turn Signal Hardware

Direct OEM replacement mounting hardware in two finishes for motorcycle lighting assemblies.

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12 V, 12 Ah

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€135.56

Rear Master Cylinder Cover Gasket — rubber, 77360

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€6.92

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete vinyl handlebar cable/line kit for Ape Hangers; includes extended brake, clutch and throttle cables plus wiring and fittings.

€240.69

CHRIS PRODUCTS Rear Turn Signal Brackets — Mount

Rear Turn Signal Brackets available in chrome or black nickel finish, designed as direct OEM replacements.

€10.04

CYCLE PERFORMANCE PROD. Mini Flex-Blanket™

Radiant, conductive heat shield that reflects 95% of infrared heat and delivers a durable high-temperature barrier.

€69.84

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers with extended cables, brake line options with PTFE liner and stainless braid, and full wiring for 2" riser setups.

€246.72

CHRIS PRODUCTS Turn Signal Standoff

Redesigned to accommodate new wiring configurations; provides secure mounting and easy installation.

€12.37

Replacement Windshield — 130 Series, 10", Smoke

SLIPSTREAMER Replacement Windshield — Gray

Direct replacement windshield for H-D Touring models. Made in the USA.

€84.82

Handguard LED Light Kit — 12V, 8W, Star Series

POWERMADD Handguard LED Light Kit — 12 V

Snap-in lighting modules that boost peripheral visibility and can be wired via the included waterproof switch. 200 lumens per module.

€51.99

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete cable and line kit for ape hanger-style handlebars
Includes extended clutch, throttle/idle cables and wiring
Brake lines (when included) have PTFE liner and stainless braid
Designed around 2" risers; dresser kits reuse stock TBW harness

€240.69

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver

S&S CYCLE 1200cc Conversion Kit for XL883 — Silver

Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.

€882.97

Diamond-Style Light Kits — 146 mm (5-3/4"), 12 V, 55 W, Halogen

DRAG SPECIALTIES Diamond-Style Light Kits — 12 V

Diamond-style reflector light kit replaces older-style lights and includes a bulb and wiring for straightforward installation; fits most housings.

€37.13

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€21.71

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

S&S CYCLE 1200cc Conversion Kit for XL883

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€1,021.00

Red and Clear Skull Taillight — 63.5 mm H, 12.5 cm L, 63.5 mm W, Red/Clear lens, Chrome housing

DRAG SPECIALTIES Red and Clear Skull Taillight

Skull-style taillight with die-cast frame for durable custom styling.

€41.14

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers with extended brake, clutch and throttle lines plus wiring and hardware. PTFE-lined brake hoses when included. Reuses stock Throttle-By-Wire harness.

€253.86

Replacement Taillight Lens — Clear/Red, Rear, P/N 12-0401

DRAG SPECIALTIES Replacement Taillight Lens

Top-quality replacement component for motorcycle lighting. Durable construction for reliable performance and simple installation.

€19.75

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers; includes extended brake line (when included), extended clutch and throttle cables, plus all necessary wiring for ape hanger setups.

€240.69

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for ape hanger–style handlebars: extended brake, clutch and throttle lines as required, plus wiring. PTFE‑lined braided brake lines when included; based on 2" risers.

€240.69

Shortshots Staggered Exhaust System — Chrome, 2-into-2 system

VANCE & HINES Shortshots Staggered Exhaust System

Short, high-style short-pipe exhaust with removable baffles, 1-3/4" headpipes and 220° coverage heat shields. Made in the U.S.A.

€573.21

Laydown Taillight Lens with Bottom Tag Lens — Red, Laydown mount, Rear

DRAG SPECIALTIES Laydown Taillight Lens with Bottom Tag Lens

Smooth, low‑profile lens that matches OEM rear angles and gives a clean custom look; requires LED bulb.

€23.27

BURLY BRAND Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hangers...

Complete installation kit for Burly Ape hangers. Includes extended brake line (when noted), extended clutch and throttle cables, plus all required wiring. Brake lines (when included) use a PTFE liner and stainless steel braid.

€240.69

Bullet Marker Lights — 3" L x 1" dia, front mount, amber lens, chrome housing

PRO-ONE PERF.MFG. Bullet Marker Lights

Supplemental bullet-style marker lights intended to supplement stock turn signals; not for use as running lights.

€51.75

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — Black, Silver

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€283.62

Replacement Windshield — 130 Series, 25.5 cm (10"), Dark Smoke

SLIPSTREAMER Replacement Windshield — Gray

Exact replacement windshield for H-D Touring models. Made in the USA.

€70.40

Shortshots Staggered Exhaust System

Short, fat, straight-pipe look with twin slash-cut ends; includes removable baffles and complete mounting hardware. Made in the U.S.A.

€573.21

$Replacement Windshield — 130 Series, 15 cm (6\"), Dark Smoke$

SLIPSTREAMER Replacement Windshield — Gray

Exact replacement for H-D Touring models. Made in the USA.

€60.79

shop by category

HARLEY

HARLEY

Subcategories

Audio

Batteries

Body & Frame

Brakes

Drivetrain

Electrical & Ignition

Lighting

Engine

Intake

Exhaust

Forward Controls / Pegs

Handlebars & Controls

Luggage

Mirrors

Seats

Suspension

Wheels

Dash & Speedometers

Guards & Highway Bars

Hardware, bolts, nuts...

Fairings & Windshields

Control Cables & Hoses

Contact us

Products

Our company

shop by category

HARLEY  

HARLEY

Subcategories

HARLEY