HARLEY

High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm, negative terminal right front

DRAG SPECIALTIES BATTERIES High Performance Battery — 12 V, 7 Ah, 133×134×76.2 mm,...

Specifically designed for high-performance engines; radial grid for maximum cranking amps; brass spacers and stainless hardware; high vibration resistance; acid not included; not spill-proof; charge monthly when stored.

€54.25

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€4.88

KHROME WERKS Handlebar ETC Grip Extension — Raw finish

Plugs ETC notches for TBW handlebars so TBW bars can be used on non-TBW models; evens left and right; made in the U.S.A.

€12.87

AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA, 152.4×87.3×145 mm

YUASA AGM Maintenance-Free Battery — 12V 12Ah, 200 A CCA,...

Maintenance-free AGM battery with sealed design for reliable starting and vibration resistance.

€112.03

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.72

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" (25.4 mm), Aluminum, Black Gloss

Billet aluminum clamp that strengthens risers and improves control. Covers 1-1/4" clamping area sized down to 1" and fits 3-1/2" on-center risers. Made in USA.

€50.09

CYCLE PERFORMANCE PROD. Mini Flex-Blanket™ — 12" x 40"

Radiant, conductive heat shield that reflects 95% of infrared heat and delivers a durable high-temperature barrier.

€57.72

Extended Rim Lock Nuts — 8 mm x 1.25 mm, 13 mm hex head, Black gloss, Set

MOTION PRO Extended Rim Lock Nuts — 8 mm x 1.25 mm, 13 mm hex head, Black...

Gloss finish with laser-engraved logo. 6061-T6 aluminum construction. Extra length for easy removal and installation. Fits 8 mm x 1.25 mm rim lock bolts. 13 mm hex head. Includes two nuts and two beveled washers.

MOTION PRO Rim Lock Damper — 1.6", 1.4" rim width, Black, Raw

Reduces rim lock shifting and spoke stress; installs under common rear rim locks for improved wheel reliability.

S&S CYCLE 1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in, Silver

Ready-to-assemble cylinders and pistons with rings and gaskets; eliminates machining and head changes. Designed for use with 883 heads.

€729.73

MOTION PRO LiteLoc™ II Rim Lock — Rim width 1.6 in, with nut/beveled washer

Thermoplastic cover and nylon composite body lock the tire securely; recommended nut torque 10 lb/ft. Super light and impact resistant.

$Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black$

TERRY COMPONENTS Battery Cable — 4 AWG, 127 mm (5\"), Ring terminal, Black

Flexible silicone jacket for easy routing and long life. 99.9% electrolytic copper lug for a secure, conductive connection. Delivers strong cranking power with minimal voltage drop. Made in the USA.

€17.94

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

S&S CYCLE 1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore,...

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€843.80

LiteLoc™ II Rim Lock — Rim width 1.85", with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock — Rim width 1.85", with nut and beveled...

Lightweight rim lock with a TPU cover for added shock absorption, precision-molded nylon body, and angled ribs to secure the tire bead. Recommended nut torque: 10 lb/ft.

Handlebar Clamp — 1" clamping diameter, fits '74–'17 models, chrome

DRAG SPECIALTIES Handlebar Clamp — 1" clamping diameter, fits '74–'17 models,...

Die-cast clamp for most '74–'17 models with 3-1/2" on-center risers and offset mounting holes. Fits 1" OD bars.

€19.22

LiteLoc™ II Rim Lock — 2.15" rim width, with nut and beveled washer

MOTION PRO LiteLoc™ II Rim Lock — 2.15" rim width, with nut and beveled...

Thermoplastic polyurethane cover for improved shock absorption and pinch‑flat protection; precision molded nylon composite body; unique angled ribs for a secure fit; recommended nut torque 10 lb/ft.