JIMS (6)

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€92.01
Out of Stock

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€357.82 €449.83

-€18.62
Out of Stock

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€72.41 €91.03

-€5.19
Out of Stock

JIMS Staking Dowel Pins — Silver, 10-pack

Precision fasteners that hold bushings in place. Made in the USA.

€20.16 €25.35

Cam Bearing and Bushing Alignment Tool — '70-'99 Big Twin & aftermarket cases (except Twin Cam)

-€30.77
Out of Stock

JIMS Cam Bearing and Bushing Alignment Tool — '70-'99 Big Twin &...

Checks cam bearing to cam cover bushing alignment to within 0.0003"; binding indicates misalignment. Fits '70-'99 Big Twin and aftermarket cases (except Twin Cam). Made in the USA.

€119.66 €150.43

Twin Cam "B" Motor Crankshaft Bearing Tool — Black

-€112.79
Out of Stock

JIMS Twin Cam "B" Motor Crankshaft Bearing Tool — Black

Protects engine cases during cam-side crankshaft bearing removal or installation. Special support block design. Made in the USA.

€438.67 €551.46

Tappet Adjustment Tool — Hydraulic adjuster, Pushrod application, Blue, Silver

-€10.29
Out of Stock

JIMS Tappet Adjustment Tool — Hydraulic adjuster, Pushrod...

Hand tool for verifying tappet adjustment. Confirms tip fit and endplay; not compatible with solid or limited-travel tappets. Made in the United States.

€40.05 €50.34

-€83.63
Out of Stock

JIMS Rocker Bushing Reaming Tool — Rocker Box, Silver

Precision line reamer for rocker bushings; reams to .0007"–.0012" for factory fit. Made in the U.S.A.

€325.25 €408.88

Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

-€10.64
Out of Stock

JIMS Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

Check pinion gear pitch diameters. Refer to the service manual for sizing. Made in the U.S.A.

€41.37 €52.01

-€87.98
Out of Stock

JIMS Clutch Gear Puller — Main shaft, kick starter, 4-speed, bronze

Removes kick starter clutch gear without damage; made in the United States.

€342.10 €430.08

-€156.33
Out of Stock

JIMS 5-Speed Shifter Upgrade Kit — JIMS, fits early-model Big Twin

Upgrades early-model 5-speed Big Twin transmissions with a new shift drum and lever assembly, late-model pillow blocks, sleeve bushing, hardware and instructions.

€607.97 €764.30

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€12.14
Out of Stock

JIMS Inner Primary Bearing Upgrade — Chrome

Double-row sealed inner primary bearing kit ideal for open primary or high-output systems.

€47.23 €59.37

Out of Stock

JIMS Ignition Switch Connector Remover

The Ignition Switch Connector Remover is a specialized tool for safely removing ignition switch wiring connectors with ease.

€165.77

-€11.47
Out of Stock

JIMS Spark Plug and O² Sensor Thread Chaser — M12 x 1.25, Black

Restores damaged spark plug and O² sensor I.D. threads. Three-flute design with generous lead-in pilot for smooth thread repair. Made in the USA.

€44.59 €56.06

-€5.39
Out of Stock

JIMS Spark Plug and O² Sensor Thread Chaser — M18 x 1.5 thread, Black

Three-flute thread chaser with a generous lead-in pilot; repairs damaged internal threads without cutting oversize threads. Made in the USA.

€20.94 €26.33

Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red, Yellow

-€24.75
Out of Stock

JIMS Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red,...

Color‑coded, fully insulated probes with 180°, 45°, 90° options and 4 mm banana plugs for safe, precise diagnostics.

€96.26 €121.01

Onboard Diagnostic Voltmeter — Black, Red

-€27.92
Out of Stock

JIMS Onboard Diagnostic Voltmeter — Black, Red

Attaches to the battery for quick diagnosis of charging system and battery issues; works with 6 V and 12 V systems. Made in the USA.

€108.57 €136.49

-€26.60
Out of Stock

JIMS Tire Air Pressure Gauge — 0–60 psi, Black

Records pressure until release button is engaged
Shock-resistant rubber-coated exterior
Made in the U.S.A.

€103.43 €130.03

-€9.57
Out of Stock

JIMS 25 mm Wheel Bearing Adapter — Black, Metric

Precision 25 mm adapter for Harley-Davidson® models from '07 to '19. Made in the USA.

€37.23 €46.80

Out of Stock

JIMS Hub Protector

The Hub Protector prevents damage to the wheel and is proudly made in the U.S.A.

€62.30

-€249.64
Out of Stock

JIMS Roller Rocker Arms — Set of 4, front and rear

Precision-cast 4340 chromoly roller rocker arms that reduce valve train friction and increase top-end horsepower. Set includes two front and two rear rocker arms.

€970.82 €1,220.46

Master Cylinder Hydraulic Brake Bleeding Solution — Silver, Front/Rear/Clutch kit

-€80.65
Out of Stock

JIMS Master Cylinder Hydraulic Brake Bleeding Solution — Silver,...

Vacuum-bleed kit with a transparent cap; includes five caps and gaskets. Vacuum pump not included. Made in the U.S.A.

€313.61 €394.26

-€17.43
Out of Stock

JIMS Master Cylinder Brake Bleeding Solution — Front brake, Silver

Transparent sealing cap that attaches to the master cylinder for a cleaner, low-fluid brake bleeding process. Vacuum pump not included.

€67.75 €85.18

Out of Stock

JIMS Master Cylinder Brake Bleeding Solution

The Master Cylinder Brake Bleeding Solution ensures efficient brake system maintenance with a vacuum-bleed device that forms a tight seal to the master cylinder. Cleaner air purging method with less fluid used.

€58.00

-€88.46
Out of Stock

JIMS 5-Speed Transmission Main Drive Gear Tool — 5-Speed, Black

Installs and removes the main drive gear without removing the transmission. Made in the USA.

€344.00 €432.46

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€10.48
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for secure maintenance. Enables torque-wrench tightening and breaker-bar loosening. Protects rotor and magnets. Made in the U.S.A.

€40.70 €51.18

shop by category

Home

List of products by brand JIMS

Contact us

Products

Our company

shop by category

Home  

List of products by brand JIMS

Home