JIMS (5)

-€47.93
Out of Stock

JIMS Wrist Pin Tool — Black, Blue, Silver, JIMS 1276

A handheld tool that simplifies wrist pin removal and installation for one-person operation. Made in the U.S.A.

€186.39 €234.32

-€56.67
Out of Stock

JIMS Inner Cam Bearing Removal Tool — Cam, crankcase, black

Removes inner cam bearings without damaging the crankcase. Prevents rollers from falling into the crankcase. Includes instructions. Made in the United States.

€220.39 €277.06

Out of Stock

JIMS Cylinder Torque Plate Kit

The Cylinder Torque Plate Kit is designed for precision boring and honing of late-model aluminum cylinders, simulating stress conditions and ensuring optimal performance.

€693.42

-€25.10
Out of Stock

JIMS Castlenut Socket — for inverted forks, black

Adapts a wrench to remove castle nuts and access the shock cylinder. Made in USA.

€97.59 €122.69

Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

-€63.35
Out of Stock

JIMS Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

Secures rods during reaming or honing of wrist pin bushings. Made in the USA. Fits most V-Twin and Buell Blast applications.

€246.36 €309.71

-€10.05
Out of Stock

JIMS Rod Alignment Tool — 114.3 mm (4-1/2"), Silver

Checks rod straightness without removing rods from the cases. Made in the U.S.A.

€39.09 €49.14

-€41.79
Out of Stock

JIMS Alternator Rotor Tool — 45A

Must-have puller for 45A charging systems; protects sprocket shaft threads and works with Harley-Davidson® alternators.

€162.53 €204.32

-€25.10
Out of Stock

JIMS Optional Seal Driver — Main shaft, Transmission, 4-Speed, Black

Optional drivers for use with the primary seal installation tool to help install seals.

€97.59 €122.69

Brake Caliper Piston Remover — Front and rear 4-piston calipers, gray, red

-€28.87
Out of Stock

JIMS Brake Caliper Piston Remover — Front and rear 4-piston...

Removes and holds caliper pistons square for safe seal and wiper installation on 4-piston front and rear calipers.

€112.27 €141.14

-€73.52
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — Wrist pin, 1726-1

Reams wrist pin bushings to the specified inner diameter. Can be used with rods in or out of the motor. Lead-in taper for easy use. Made in the U.S.A.

€285.92 €359.44

-€80.40
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — wrist pin, Gray

Reams wrist pin bushings to the proper inner diameter. Use with rods in or out of the motor; lead-in taper for easy entry.

€312.66 €393.06

-€92.59
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€360.09 €452.68

-€26.87
Out of Stock

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€104.50 €131.37

-€27.36
Out of Stock

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€106.40 €133.76

Out of Stock

JIMS Hardware Organizer M8

The Hardware Organizer M8 by JIMS is designed for Milwaukee Eight models, offering a practical solution for organizing hardware during disassembly and reassembly.

€131.41

-€50.24
Out of Stock

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€195.38 €245.62

Out of Stock

JIMS Pinion Gear Locker Tool

The Pinion Gear Locker Tool allows for secure locking of the pinion gear during nut torquing, ensuring a reliable fit.

€196.82

Out of Stock

JIMS Sprocket Shaft Holder

The Sprocket Shaft Holder securely holds the flywheel assembly in a vise, with or without the left case attached.

€167.58

-€63.32
Out of Stock

JIMS Rocker Bushing and Roller Bearing Puller — Rocker box, Black

Removes rocker bushings and roller bearings in a single operation. Made in the U.S.A.

€246.20 €309.52

-€24.26
Out of Stock

JIMS Oil Pump Snap Ring Installer — Black

Tool for installing the outer snap ring on oil pump shafts; prevents over-stretching and speeds assembly. Made in the U.S.A.

€94.39 €118.65

-€32.79
Out of Stock

JIMS Oil Pump Seal Installer — Oil System, Black

Installs oil pump seals below the gear surface for a leak-free fit. Fits Big Twin aluminum oil pumps (except Twin Cam/M8). Made in the U.S.A.

€127.51 €160.30

-€38.71
Out of Stock

JIMS Clutch Spring Compressor Tool — Blue

Releases the clutch spring for easy retainer ring removal and installation. Made in the USA.

€150.53 €189.24

-€25.92
Out of Stock

JIMS Clutch Spring Tool — Black

Releases clutch spring tension for easy disassembly. Made in the U.S.A.

€100.81 €126.73

Out of Stock

JIMS Timken® Bearing Simulator

The Timken® Bearing Simulator allows for quick removal and replacement of the flywheel assembly, enabling precise clearance checks without damaging bearing races.

€96.40

-€53.82
Out of Stock

JIMS Pulley Locker — Transmission, Blue

Locks the pulley for removal or installation of the pulley nut. Made in the U.S.A.

€209.31 €263.13

-€12.61
Out of Stock

JIMS Crankshaft Guide — Crankcase, Gray

Spreads the pinion bearing rollers for right-side case reassembly. Made in the U.S.A.

€49.03 €61.64

-€38.00
Out of Stock

JIMS Sprocket Shaft Seal Installer — Sprocket shaft, Black

Installs sprocket seals to the correct depth and holds them square for reliable sealing. Use with a driver handle. Made in the U.S.A.

€147.76 €185.76

-€32.60
Out of Stock

JIMS Optional Seal Driver — Main shaft, 5-Speed transmission

Optional drivers for use with the main shaft seal tool to install seals accurately.

€126.75 €159.35

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€92.01
Out of Stock

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€357.82 €449.83

-€18.62
Out of Stock

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€72.41 €91.03

shop by category

Home

List of products by brand JIMS

Contact us

Products

Our company

shop by category

Home  

List of products by brand JIMS

Home