TODD'S CYCLE (2)

1-1/4" Touring Handlebar — 1-1/4" clamp, 31" width, 12" rise, flat black

-€131.21

TODD'S CYCLE 1-1/4" Touring Handlebar — 1-1/4" clamp, 31" width, 12" rise,...

Classic ape-hanger profile with modern compatibility. Knurled center for secure clamping; notched for throttle-by-wire. Works with OEM riser and clamps; accepts heated grips and hydraulic clutches. Made in the U.S.A.

€273.92 €405.13

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 14" rise, 32" width

-€89.08

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 14" rise, 32" width

Knurled clamping area for a positive grip
Works with OEM riser and clamps; correct wire exit location
No removal of stock pin required; wide adjustment range
Compatible with hydraulic clutches and heated grips
Notched for throttle-by-wire; adjustable fit

€346.43 €435.51

1-1/4" Touring Handlebar — 32 mm (1-1/4"), 17" rise, Black gloss

-€91.31

TODD'S CYCLE 1-1/4" Touring Handlebar — 32 mm (1-1/4"), 17" rise, Black gloss

1-1/4" touring handlebar with knurled clamping area. Works with OEM riser and clamps, correct wire exit, adjustable over 35°, compatible with hydraulic clutches. Made in the U.S.A.

€355.09 €446.40

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamp, 30" width, flat black

Motocross-style, low-profile handlebar with internal wiring slots and a smooth, unknurled grip area. Made in the U.S.A.

€131.14 €164.86

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise, Gloss Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 8" rise,...

Simple, classic beater bar with a narrow, upright profile. Slotted for internal wiring, unknurled finish, and made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, 4-3/4" pullback, Flat Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic straight, narrow beater handlebar with internal wiring slot. No knurling. Made in the U.S.A.

€137.69 €173.10

1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32" width, Black gloss

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2") clamp, 11" rise, 32"...

Strip-style handlebar with slotted internal wiring and throttle-by-wire notch. Requires special risers and clamps. Made in the U.S.A.

€390.35 €490.73

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise, 81.5 cm...

Strip-style handlebar with smooth, unknurled finish. Slotted for internal wiring, notched for electronic throttle, and compatible with OEM heated grips. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise 33 cm (13"), Black gloss

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 81.5 cm (32"), rise...

Classic strip-style handlebar with polished welds, internal wiring routing, and electronic-throttle compatibility. Requires special risers and clamps; made in the U.S.A.

€409.83 €515.21

1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamping, 32" width, 13" rise

Strip handlebar with polished welds, internal wiring slots, throttle-by-wire notch and pre-drilled ends; requires special risers and clamps. Works with OEM heated grips.

€307.16 €386.14

1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm width, Black gloss

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping, 38 cm rise, 84.5 cm...

Smooth strip handlebar with slotted wiring, throttle-by-wire notch, polished welds, and OEM heated-grip compatibility. Made in the U.S.A.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width, Black gloss

-€155.76

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm (1-1/2"), 21" rise, 35" width,...

Polished welds; slotted for internal wiring; notched for electronic throttle; accepts OEM heated grips; made in the U.S.A.; requires special risers and clamps.

€230.38 €386.14

Shifter Spline Cover — Black, gloss powder-coated

-€7.50

TODD'S CYCLE Shifter Spline Cover — Black, gloss powder-coated

CNC-machined billet aluminum cover fits over the shifter shaft end for heel-shifter removal; made in the U.S.A.

€29.16 €36.66

1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

-€111.28

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/4" clamp, 32" width, gloss black

Strip-style handlebar with pre-drilled routing for internal wiring, notched for throttle-by-wire and compatible with OEM heated grips. Requires special risers and clamps.

€432.80 €544.08

shop by category

Home

List of products by brand TODD'S CYCLE

Contact us

Products

Our company

shop by category

Home  

List of products by brand TODD'S CYCLE

Home