CYCLE VISIONS (2)

Bagger Tail — OEM-compatible, black powder-coated

-€79.75
Out of Stock

CYCLE VISIONS Bagger Tail — OEM-compatible, black powder-coated

Mount hard-style saddlebags with included hardware. Fits fixed or detachable sissy bar side plates for clean, secure carrying.

€310.15 €389.90

Twisted Sticks Sissy Bar — 762 mm (30"), Chrome

-€69.76
Out of Stock

CYCLE VISIONS Twisted Sticks Sissy Bar — 762 mm (30"), Chrome

Iconic Twisted Sticks Sissy Bar kit with 9/16" square bar construction; bolt-on hardware included.

€271.30 €341.06

Bagger-Tail Filler Panels — For '14+ hard bags

-€52.30
Out of Stock

CYCLE VISIONS Bagger-Tail Filler Panels — For '14+ hard bags

Filler panels for Bagger-Tail hard-bag systems. Made from 16-gauge cold-rolled steel. For fiberglass or ABS hard bags. Must be used with Bagger Tail brackets.

€203.40 €255.70

Twisted Sticks Sissy Bar — 762 mm (30"), Black

-€69.76
Out of Stock

CYCLE VISIONS Twisted Sticks Sissy Bar — 762 mm (30"), Black

Classic twisted-design sissy bar made from 9/16" square bar; bolt-on installation and low-profile appearance.

€271.30 €341.06

Eliminator™ Taillight — 4" x 7", chrome housing

-€79.75
Out of Stock

CYCLE VISIONS Eliminator™ Taillight — 4" x 7", chrome housing

Neatly replaces taillight, turn signals and 4" x 7" license plate mount. LED lights, plug-and-play harness and built-in run/turn/brake controller for a clean, integrated installation.

€310.15 €389.90

Squaretude Styled Sissy Bar Sticks — 762 mm (30"), 223 mm (8-3/4"), Chrome

-€42.94
Out of Stock

CYCLE VISIONS Squaretude Styled Sissy Bar Sticks — 762 mm (30"), 223 mm...

Squaretude styled sissy bar sticks made from 9/16" square steel bar. Side plates sold separately. For show use only; not for passenger support.

€166.95 €209.89

Sissy Bar Side Plates — 22.23 cm (8-3/4"), Chrome

-€26.83
Out of Stock

CYCLE VISIONS Sissy Bar Side Plates — 22.23 cm (8-3/4"), Chrome

Ridged mounted sissy bar side plates. No turn signal relocation required. Hardware not included.

€104.33 €131.16

-€45.61
Out of Stock

CYCLE VISIONS D-Tach Sissy Bar Side Plates — 279 mm (11"), Chrome

Ten gauge steel side plates for Cycle Visions sissy bars. Fits any 11" wide sissy bar. Made in the U.S.A. Docking hardware not included.

€177.39 €223.00

-€45.61
Out of Stock

CYCLE VISIONS D-Tach Sissy Bar Side Plates — 279 mm (11"), Black

Ten-gauge steel side plates for Cycle Visions 11" sissy bars; detachable design. Docking hardware not included.

€177.39 €223.00

-€7.74
Out of Stock

CYCLE VISIONS Ignition Switch — Key actuation, CV4870

Off/on/start ignition switch with car-style operation. Made in the United States.

€30.13 €37.87

-€26.83
Out of Stock

CYCLE VISIONS Sissy Bar Side Plates — 279 mm (11"), Black, powder-coated

Ridged mounted sissy bar side plates. No turn signal relocation required. Hardware not included.

€104.33 €131.16

Sissy Bar Side Plates — 22–23 cm (8-3/4"), Black

-€26.83
Out of Stock

CYCLE VISIONS Sissy Bar Side Plates — 22–23 cm (8-3/4"), Black

Ridged 10-gauge steel sissy bar side plates; no turn signal relocation required. Hardware not included.

€104.33 €131.16

-€26.83
Out of Stock

CYCLE VISIONS Sissy Bar Side Plates — 22–23 cm (8-3/4") , Black, powder-coated

Ridged side plates for mounting a sissy bar. No turn signal relocation required. Hardware not included.

€104.33 €131.16

Little Lite Brackets — Front/Rear, Chrome, Pair

-€8.05
Out of Stock

CYCLE VISIONS Little Lite Brackets — Front/Rear, Chrome, Pair

Durable 90° steel brackets for mounting auxiliary or turn signal lights. Made in the U.S.A.

€31.31 €39.36

The Correct Rear Wheel Pulley Spacers/Adapter — 6.4 mm (0.250"), for '00+ wheels, machined

-€14.40
Out of Stock

CYCLE VISIONS The Correct Rear Wheel Pulley Spacers/Adapter — 6.4 mm...

Flanged spacer for precise pulley alignment with stock H-D hubs. May require longer bolts. Not compatible with cush drive pulleys.

€56.00 €70.40

The Correct Rear Wheel Pulley Spacer/Adapter — 6.4 mm (0.250"), for '84–'89 wheels, machined

-€14.76
Out of Stock

CYCLE VISIONS The Correct Rear Wheel Pulley Spacer/Adapter — 6.4 mm...

Precision rear pulley spacer/adapter designed for stock H-D aluminum hubs; flanged for perfect alignment. May require longer bolts. Not compatible with cush drive pulley.

€57.40 €72.16

The Correct Rear Wheel Pulley Spacers/Adapter — For 1984–1989 wheels, 1.9 mm, Machined

-€14.76
Out of Stock

CYCLE VISIONS The Correct Rear Wheel Pulley Spacers/Adapter — For 1984–1989...

Flanged rear pulley spacers/adapter for stock H-D aluminum hubs. May require longer bolts. Not compatible with cush drive pulley.

€57.40 €72.16

The Correct Rear Wheel Pulley Spacers/Adapter — 12.7 mm (0.500"), for '84+ wheels, machined

-€16.91
Out of Stock

CYCLE VISIONS The Correct Rear Wheel Pulley Spacers/Adapter — 12.7 mm...

Flanged spacers/adapters that ensure correct pulley alignment with stock H-D hubs. May require longer bolts. Not compatible with cush drive pulley.

€65.74 €82.65

The Correct Rear Wheel Pulley Spacers/Adapter — Rear, 2.5 mm (0.100") width, Machined

-€14.76
Out of Stock

CYCLE VISIONS The Correct Rear Wheel Pulley Spacers/Adapter — Rear, 2.5 mm...

Flanged rear spacer/adapter for precise pulley alignment; fits stock H-D hubs. Sold each. May require longer bolts. Not compatible with cush drive pulleys.

€57.40 €72.16

-€13.42
Out of Stock

CYCLE VISIONS Fender Risers — 21" front, chrome

Allows installation of larger wheels on Dresser models; heavy-gauge construction; includes mounting hardware.

€52.17 €65.59

Fender Risers — 23" wheels, front mount, chrome

-€15.12
Out of Stock

CYCLE VISIONS Fender Risers — 23" wheels, front mount, chrome

Made of 13-gauge steel. Necessary for installation of larger wheels on Dresser models.

€58.77 €73.89

-€10.73
Out of Stock

CYCLE VISIONS Fender Risers — 23", front, black powder-coated

13-gauge steel construction. Necessary for installing larger wheels on Dresser models. Helps provide fender clearance while maintaining alignment.

€41.74 €52.47

Glove Box Door Spring Set — CYCLE VISIONS CV610

-€5.43
Out of Stock

CYCLE VISIONS Glove Box Door Spring Set — CYCLE VISIONS CV610

Replacement springs for Road Glide glove box to restore tension and smooth operation.

€21.08 €26.51

-€8.05
Out of Stock

CYCLE VISIONS Beveled License Plate Frame — Fits 4" x 7" plates, Chrome

Aluminum beveled frame with blind-hole design. Low-profile fit for all 4" x 7" license plates. Made in the USA.

€31.31 €39.36

Beveled License Plate with Lights — fits 4" x 7" plates, 4-1/4" H, 7-1/4" W, Chrome

-€16.11
Out of Stock

CYCLE VISIONS Beveled License Plate with Lights — fits 4" x 7" plates,...

Beveled license plate frame with integrated light and blind-hole design for a clean, low-profile finish. Made in the USA.

€62.60 €78.71

In-Close License Plate Holder — 4" x 7", side mount for FXST/FLST & FXD/XL, chrome

-€67.08
Out of Stock

CYCLE VISIONS In-Close License Plate Holder — 4" x 7", side mount for...

Billet aluminum; most tucked-in holder on the market; mounts off the axle on FXST/FLST and off-axle adjuster on FXD/XL; accepts most 4" x 7" plates; not for use with shock relocation kits or saddlebags.

€260.86 €327.94

In-Close License Plate Holder — 10 cm (4"), 18 cm (7"), Chrome, Side mount

-€67.08
Out of Stock

CYCLE VISIONS In-Close License Plate Holder — 10 cm (4"), 18 cm (7"),...

Billet aluminum holder with no visible fasteners. Most tucked-in design. Mounts off the axle on FXST/FLST and off the axle adjuster on FXD/XL. Accepts most 4" x 7" plates. Not for use with shock relocation kits or saddlebags.

€260.86 €327.94

-€34.88
Out of Stock

CYCLE VISIONS Slick Signals Flat License Plate Frame — 4" x 7", flat, chrome

Low-profile frame with dual-function red LEDs on the top and sides. Accepts most standard U.S. license plates; wiring instructions included. Requires custom installation. Lighting is not DOT compliant.

€135.65 €170.53

-€34.88
Out of Stock

CYCLE VISIONS Slick Signals Flat License Plate Frame — 4" x 7", flat, black

Dual-function red LEDs on top and sides; fits most 4" x 7" plates; includes wiring instructions; requires custom installation.

€135.65 €170.53

Curved Slick Signals License Plate Frame with 3-Hole Backing Plate — Rear mount, Chrome

-€48.30
Out of Stock

CYCLE VISIONS Curved Slick Signals License Plate Frame with 3-Hole Backing...

Three-bolt mount fits most OEM fenders with a three-hole bolt pattern (not for bobbed fenders). Integrated LED run, turn, brake and plate lights. Lights require hardwiring.

€187.82 €236.12

shop by category

Home

List of products by brand CYCLE VISIONS

Contact us

Products

Our company

shop by category

Home  

List of products by brand CYCLE VISIONS

Home