Handlebars

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp

Springer-style 1-1/4" handlebar with 4-3/4" center diamond knurling; fits OEM Springer risers and clamps. Made in the U.S.A.; not for use with electronic throttle control or heated grips.

€244.23 €330.64

-€86.41

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — Chrome, 103 cm (40-1/2")

1-1/4" diameter Buffalo Springer handlebar; 1" clamping area; 4-3/4" diamond knurled center; made in the U.S.A.; not compatible with electronic throttle control or heated grips.

€244.23 €330.64

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

-€81.73

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

Ultimate Buffalo T-Bar for enhanced comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C. Compatible with hydraulic clutch controls.

€230.95 €312.68

1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width, Chrome

-€32.50

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width,...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€110.50 €143.00

1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width, Gloss Black

-€33.64

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width,...

Notched for electronic throttle control
Drilled for internal wiring
Made in the USA

€95.08 €128.72

1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss Black

-€27.96

DRAG SPECIALTIES 1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€95.08 €123.04

-€45.73

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32" width, Chrome

Notched for electronic throttle control, drilled for internal wiring, made in the USA.

€129.23 €174.96

1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss Black

-€64.28

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss...

Diamond-knurled Buffalo touring handlebar machined for internal wiring and throttle-by-wire compatibility.

€181.66 €245.94

-€70.79

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 40" width, gloss black

Diamond-knurled touring handlebar pre-drilled for internal wiring; accepts stock controls and OEM heated grips; made in the USA.

€200.05 €270.84

-€70.79

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo Touring handlebar with diamond knurling and internal wiring; accepts stock controls, compatible with electronic throttle control systems and H-D OEM heated grips. Made in the U.S.A.

€200.05 €270.84

1-1/2" "Big" Buffalo Ape Hanger Bar — 1-1/2" diameter, 16" rise, 41" width, Chrome

-€99.74

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Ape Hanger Bar — 1-1/2" diameter, 16"...

Handlebars that deliver the biggest, fattest look with custom bends for comfort. Slotted and notched for Throttle-By-Wire; compatible with most '99+ Harley-Davidson controls. Made in the USA.

€281.86 €381.60

-€84.11

DRAG SPECIALTIES [object Object]

1-1/2" "Big" Buffalo Ape Hanger Bar. Custom bends for comfort; special risers required. Fits most '99-'19 Harley-Davidson models and designed for '96 and newer style controls and master cylinders. Made in the U.S.A.

€237.69 €321.80

-€80.34

TODD'S CYCLE 1" Strip Handlebar — Width 69 cm (27-1/4"), Rise 20.5 cm (8")

Stripper-style handlebar made from thick-wall steel with polished welds, slotted for internal wiring and no knurling.

€312.43 €392.77

-€76.67

TODD'S CYCLE 1" Strip Handlebar — 75 cm (29-1/2"), 1" clamp, chrome

Strip handlebar slotted for internal wiring, pre-drilled for controls, with polished welds and a smooth, unknurled grip. Made in the U.S.A.

€298.17 €374.84

1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise, Black

-€80.34

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise,...

Classic 1" Strip handlebar with polished welds, slots for internal wiring, and a smooth, unknurled grip. Made in the U.S.A.

€312.43 €392.77

-€80.34

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 33-1/4" width, 17" rise, Chrome

Classic "Stripper" handlebar with polished welds and internal wiring slot. Pre-drilled and made in the U.S.A.

€312.43 €392.77

1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"), 17" rise, Black gloss

-€76.50

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"),...

Strip-style 1" handlebar in thick-wall steel, polished welds, slotted for internal wiring, pre-drilled and unknurled.

€297.55 €374.05

-€72.86

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm (33-1/4") width

The "Stripper" handlebar features thick-wall steel construction, polished welds, slotted routing for internal wiring, and no knurling.

€283.33 €356.19

1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28" (71 cm) width, 8-1/2" (21.5 cm) rise, Black

-€80.10

TODD'S CYCLE 1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28"...

Mounts with stock hardware; slotted for internal wiring; made in the U.S.A.

€311.52 €391.62

-€76.26

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 29-1/2" width, 14" rise

Classic Strip handlebar with a smooth, pre-drilled design and polished welds; slotted for internal wiring and made in the U.S.A.

€296.60 €372.86

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 14" rise, 29" width

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; preserves clear sightlines to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1" clamp, 13" rise, chrome

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

Designed for batwing fairings; notched for throttle-by-wire; laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13" rise, 36-1/2" width

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13"...

Notched for throttle-by-wire; large laser-cut, burr-free wiring slots; designed for batwing fairings; allows factory heated grips and stock controls; made in the U.S.A.

€363.73 €457.25

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm (1\") clamp, 30\" (76 cm) width$

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm...

Polished-weld strip handlebar with slotted wiring, hydraulic clutch compatibility, and heated-grip support.

€338.66 €425.74

-€87.08

TODD'S CYCLE [object Object]

Clean 1-1/4" Strip handlebar with polished welds, slotted wiring for internal or external routing, hydraulic clutch compatibility, heated-grip support, clear sightlines to stock mirrors, made in the U.S.A.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm (31\") wide, Chrome$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€347.13 €436.38

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5 cm (10")

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5...

Strip handlebar with polished welds, slotted wiring options, hydraulic clutch compatibility, and support for heated grips.

€338.66 €425.74

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width, 9-1/2" rise, Chrome

-€59.77
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width,...

Ultimate 1-1/4" diameter Buffalo Bar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility.

€203.23 €263.00

1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp, 20-1/2" rise

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp,...

Diamond-knurled Buffalo touring handlebar accepts stock controls and OEM heated grips; pre-drilled for internal wiring.

€244.23 €330.64

Handlebars

Contact us

Products

Our company