Handlebars (5)

-€54.17

BURLY BRAND Gorilla Ape Handlebar — 32 mm (1-1/4") dia, 25.4 mm (1")...

Tapered ape-hanger handlebar with dimpled/drilled sections and a notch for electronic throttles. May require longer cables for installation.

€210.39 €264.56

-€48.65

BURLY BRAND Gorilla Ape Handlebar — 36 cm (14-1/4") center width, 32 mm...

Dimpled Gorilla Ape handlebar pre-drilled for internal wiring and notched for TBW; may require longer cables.

€188.97 €237.62

-€68.45

BURLY BRAND Drag Bar — 1-1/4" diameter, 31" width, Black

Drag handlebar with tapered tube for stock controls. Made in USA. May require changes in cable or line length.

€193.68 €262.13

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

-€4.79

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of the late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€13.55 €18.34

-€5.04

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of late-style handlebar damper kits; includes studs, rubber dampers and zinc-plated cup washers.

€14.24 €19.28

-€1.86

DRAG SPECIALTIES Handlebar Damper Kit — Chrome, 4-Pack

Faithful reproduction of late-style handlebar damper kits; includes two studs, two rubber damper sets and four zinc-plated cup washers.

€5.25 €7.11

-€36.99

BURLY BRAND Bikini Beach Bar Handlebar — 87.5 cm width, 11.5 cm rise, 25.4...

Retro '40s bikini beach bar handlebar with knurled center and highly polished finish, pre-drilled for internal wiring.

€143.84 €180.83

-€52.84

BURLY BRAND 1-1/4" Handlebar — 1-1/4" diameter, 24 cm center width, 1"...

Tapered hand-control area, dimpled and drilled for internal wiring; may require extended cables or brake lines.

€205.50 €258.34

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€68.99

BURLY BRAND 1-1/4" Handlebar — 1" clamp, 20" rise

Tapered hand control area accepts OEM or aftermarket controls. Dimpled 1" clamp area drilled for internal wiring.

€267.89 €336.88

-€59.12

BURLY BRAND 1-1/4" Handlebar — 32 mm (1-1/4"), 90 cm (35-1/2"), 25.4 mm clamp

Tapered hand-control area allows use of OEM or aftermarket controls; 1" clamping area dimpled and drilled for internal wiring; may require extended cables.

€229.89 €289.01

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp

Springer-style 1-1/4" handlebar with 4-3/4" center diamond knurling; fits OEM Springer risers and clamps. Made in the U.S.A.; not for use with electronic throttle control or heated grips.

€244.23 €330.64

-€86.41

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — Chrome, 103 cm (40-1/2")

1-1/4" diameter Buffalo Springer handlebar; 1" clamping area; 4-3/4" diamond knurled center; made in the U.S.A.; not compatible with electronic throttle control or heated grips.

€244.23 €330.64

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

-€81.73

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

Ultimate Buffalo T-Bar for enhanced comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C. Compatible with hydraulic clutch controls.

€230.95 €312.68

1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width, Chrome

-€32.50

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width,...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€110.50 €143.00

1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width, Gloss Black

-€33.64

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width,...

Notched for electronic throttle control
Drilled for internal wiring
Made in the USA

€95.08 €128.72

1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss Black

-€27.96

DRAG SPECIALTIES 1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€95.08 €123.04

-€45.73

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32" width, Chrome

Notched for electronic throttle control, drilled for internal wiring, made in the USA.

€129.23 €174.96

1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss Black

-€64.28

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss...

Diamond-knurled Buffalo touring handlebar machined for internal wiring and throttle-by-wire compatibility.

€181.66 €245.94

-€70.79

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 40" width, gloss black

Diamond-knurled touring handlebar pre-drilled for internal wiring; accepts stock controls and OEM heated grips; made in the USA.

€200.05 €270.84

-€70.79

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo Touring handlebar with diamond knurling and internal wiring; accepts stock controls, compatible with electronic throttle control systems and H-D OEM heated grips. Made in the U.S.A.

€200.05 €270.84

1-1/2" "Big" Buffalo Ape Hanger Bar — 1-1/2" diameter, 16" rise, 41" width, Chrome

-€99.74

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Ape Hanger Bar — 1-1/2" diameter, 16"...

Handlebars that deliver the biggest, fattest look with custom bends for comfort. Slotted and notched for Throttle-By-Wire; compatible with most '99+ Harley-Davidson controls. Made in the USA.

€281.86 €381.60

-€84.11

DRAG SPECIALTIES 1-1/2" "Big" Buffalo Ape Hanger Bar — 16" rise, 41" width

Bold buffalo ape hanger styling with custom bends for comfort.

Pre-drilled and notched for Throttle-By-Wire; special risers required.

€237.69 €321.80

-€39.94

BURLY BRAND 1" Scrambler Handlebar — 25.4 mm clamp, 15 cm rise, 85 cm width

Scrambler-style handlebar that adds comfortable height, reuses stock cables and is drilled for internal wiring (not for Throttle-By-Wire).

€155.11 €195.05

-€42.96

BURLY BRAND 1" Scrambler Handlebar — 1" clamp, 6" rise, 33-1/2" width, chrome

Scrambler-style handlebar that raises the reach, reuses stock cables and brake lines, and is drilled for internal wiring. Not for Throttle-By-Wire.

€167.09 €210.05

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width, 9-1/2" rise, Chrome

-€59.77

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width,...

Ultimate 1-1/4" diameter Buffalo Bar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility.

€203.23 €263.00

1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp, 20-1/2" rise

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp,...

Diamond-knurled Buffalo touring handlebar accepts stock controls and OEM heated grips; pre-drilled for internal wiring.

€244.23 €330.64

Contact us

Products

Our company