Handlebars (4)

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 30", 1" clamp, 3-1/2" rise, Black

Motocross-style low-profile bar with slotted internal wiring and unknurled finish. Made in the USA.

€131.14 €164.86

-€33.72

TODD'S CYCLE 1" Moto Bar Handlebar — 1" clamping, 30" width, 3-1/2" rise

Motocross-style low-profile handlebar with slotted internal wiring, smooth grip area, made in the USA.

€131.14 €164.86

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width

Classic, narrow beater bar with subtle pullback and ready for internal wiring.

€137.69 €173.10

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

Polished welds, slotted for internal wiring, and notched for electronic throttle; accepts heated grips and requires special risers and clamps.

€390.35 €490.73

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

Polished welds and gloss finish
Slotted for internal wiring
Notched for electronic throttle
Requires special risers and clamps
Works with OEM heated grips
Made in the USA

€409.83 €515.21

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 29" width, 10"...

Responsive handling position with comfortable ergonomics; slotted for internal wiring, crowned for throttle-by-wire systems. Some models may require longer cables and will not fit integrated lower clamp designs.

€246.60 €310.01

-€63.41

BURLY BRAND Dominator Handlebar — 32 mm (1-1/4") diameter, 73.5 cm (29")...

Responsive handling position with comfortable styling; slotted for internal wiring and crowned for fly-by-wire. May require longer cables and will not fit models with integrated lower clamp.

€246.60 €310.01

-€54.17

BURLY BRAND Gorilla Ape Handlebar — 32 mm (1-1/4") dia, 25.4 mm (1")...

Tapered ape-hanger handlebar with dimpled/drilled sections and a notch for electronic throttles. May require longer cables for installation.

€210.39 €264.56

-€48.65

BURLY BRAND Gorilla Ape Handlebar — 36 cm (14-1/4") center width, 32 mm...

Dimpled Gorilla Ape handlebar pre-drilled for internal wiring and notched for TBW; may require longer cables.

€188.97 €237.62

-€68.45

BURLY BRAND Drag Bar — 1-1/4" diameter, 31" width, Black

Drag handlebar with tapered tube for stock controls. Made in USA. May require changes in cable or line length.

€193.68 €262.13

-€4.79

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of the late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€13.55 €18.34

-€5.04

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of late-style handlebar damper kits; includes studs, rubber dampers and zinc-plated cup washers.

€14.24 €19.28

-€1.86

DRAG SPECIALTIES Handlebar Damper Kit — Chrome, 4-Pack

Faithful reproduction of late-style handlebar damper kits; includes two studs, two rubber damper sets and four zinc-plated cup washers.

€5.25 €7.11

-€36.99

BURLY BRAND Bikini Beach Bar Handlebar — 87.5 cm width, 11.5 cm rise, 25.4...

Retro '40s bikini beach bar handlebar with knurled center and highly polished finish, pre-drilled for internal wiring.

€143.84 €180.83

-€52.84

BURLY BRAND 1-1/4" Handlebar — 1-1/4" diameter, 24 cm center width, 1"...

Tapered hand-control area, dimpled and drilled for internal wiring; may require extended cables or brake lines.

€205.50 €258.34

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€68.99

BURLY BRAND 1-1/4" Handlebar — 1" clamp, 20" rise

Tapered hand control area accepts OEM or aftermarket controls. Dimpled 1" clamp area drilled for internal wiring.

€267.89 €336.88

-€59.12

BURLY BRAND 1-1/4" Handlebar — 32 mm (1-1/4"), 90 cm (35-1/2"), 25.4 mm clamp

Tapered hand-control area allows use of OEM or aftermarket controls; 1" clamping area dimpled and drilled for internal wiring; may require extended cables.

€229.89 €289.01

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp

Springer-style 1-1/4" handlebar with 4-3/4" center diamond knurling; fits OEM Springer risers and clamps. Made in the U.S.A.; not for use with electronic throttle control or heated grips.

€244.23 €330.64

-€86.41

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — Chrome, 103 cm (40-1/2")

1-1/4" diameter Buffalo Springer handlebar; 1" clamping area; 4-3/4" diamond knurled center; made in the U.S.A.; not compatible with electronic throttle control or heated grips.

€244.23 €330.64

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

-€81.73

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

Ultimate Buffalo T-Bar for enhanced comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C. Compatible with hydraulic clutch controls.

€230.95 €312.68

1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width, Chrome

-€32.50

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width,...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€110.50 €143.00

Contact us

Products

Our company