Handlebars (4)

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width

Classic, narrow beater bar with subtle pullback and ready for internal wiring.

€137.69 €173.10

1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5 cm rise

-€40.58

TODD'S CYCLE 1" Beater Bar Handlebar — 70.5 cm width, 25.4 mm clamp, 25.5...

Classic straight, narrow beater handlebar with an internal wiring slot and no knurling. Made in the U.S.A.

€157.78 €198.36

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 27-3/4" width, 10" rise, Gloss Black

Classic beater-style handlebar with a straight, narrow profile and subtle pullback. Slotted for internal wiring, no knurling, made in the U.S.A.

€137.69 €173.10

1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise, Black

-€35.41

TODD'S CYCLE 1" Beater Bar Handlebar — 1" clamp, 27-3/4" width, 10" rise,...

Classic, simple beater bar with a straight, narrow style and subtle pullback; slotted for internal wiring and no knurling. Made in the USA.

€137.69 €173.10

1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

-€100.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 32" width, 11" rise

Polished welds, slotted for internal wiring, and notched for electronic throttle; accepts heated grips and requires special risers and clamps.

€390.35 €490.73

1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width, Chrome

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 1-1/2" clamp, 13" rise, 32" width,...

Made in the USA with polished welds.

Slotted for internal wiring; pre-drilled for heated grips.

Notched for throttle-by-wire; works with OEM heated grips.

Requires special risers and clamps (sold separately).

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

-€105.38

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 33 cm rise

Polished welds and gloss finish
Slotted for internal wiring
Notched for electronic throttle
Requires special risers and clamps
Works with OEM heated grips
Made in the USA

€409.83 €515.21

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

-€50.40

HYPERPRO CSC Steering Damper — 120 mm (4.74"), Black

Linear damping steering damper with adjustable settings, triple-function seals and nitrogen reservoir. Mounting kit sold separately.

€169.60 €220.00

-€51.14

HYPERPRO CSC Steering Damper — Black

Linear, fully adjustable steering damper with low-friction 8 mm piston rod, triple-function seals and nitrogen reservoir. Mounting kit sold separately.

€173.86 €225.00

-€36.61

HYPERPRO Steering Damper Mounting Kit — Black

Mounting kit for CSC linear steering dampers. The damper provides constant damping with 22-click adjustability; check fitment for your motorcycle.

€142.39 €179.00

Steering Damper Mounting Kit — MK-HD18-S001-B, Black

-€36.61

HYPERPRO Steering Damper Mounting Kit — MK-HD18-S001-B, Black

Bike-specific mounting kit for a linear steering damper with CSC technology. Adjustable damping with 22 clicks; requires compatible brackets for installation.

€142.39 €179.00

-€36.61

HYPERPRO Steering Damper Mounting Kit — HYPERPRO, MK-HD12-S005-B, Black

Bike-specific mounting kit required to install a CSC steering damper; includes necessary hardware for secure fitment.

€142.39 €179.00

-€4.79

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of the late-style handlebar damper kits. Includes two studs, two rubber damper sets and four zinc-plated cup washers.

€13.55 €18.34

-€5.04

DRAG SPECIALTIES Handlebar Damper Kit — Riser, Black, Chrome

Faithful reproduction of late-style handlebar damper kits; includes studs, rubber dampers and zinc-plated cup washers.

€14.24 €19.28

-€1.86

DRAG SPECIALTIES Handlebar Damper Kit — Chrome, 4-Pack

Faithful reproduction of late-style handlebar damper kits; includes two studs, two rubber damper sets and four zinc-plated cup washers.

€5.25 €7.11

-€45.03

DRAG SPECIALTIES 1" Handlebar — 25.4 mm clamp, 32" width, 18" rise

Seamless steel tubing for strength and a wide range of bends for a custom fit. Made in the U.S.A.

€127.25 €172.28

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — 1-1/4" diameter, 1" clamp

Springer-style 1-1/4" handlebar with 4-3/4" center diamond knurling; fits OEM Springer risers and clamps. Made in the U.S.A.; not for use with electronic throttle control or heated grips.

€244.23 €330.64

-€86.41

DRAG SPECIALTIES 1-1/4" Buffalo Springer Handlebar — Chrome, 103 cm (40-1/2")

1-1/4" diameter Buffalo Springer handlebar; 1" clamping area; 4-3/4" diamond knurled center; made in the U.S.A.; not compatible with electronic throttle control or heated grips.

€244.23 €330.64

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

-€81.73

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, chrome

Ultimate Buffalo T-Bar for enhanced comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not compatible with stock risers/clamp on 883C/1200C. Compatible with hydraulic clutch controls.

€230.95 €312.68

1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width, Chrome

-€32.50

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamping, 10" rise, 30-1/2" width,...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€110.50 €143.00

1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width, Gloss Black

-€33.64

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 10" rise, 30-1/2" width,...

Notched for electronic throttle control
Drilled for internal wiring
Made in the USA

€95.08 €128.72

1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss Black

-€27.96

DRAG SPECIALTIES 1" Touring Handlebar — 1" diameter, 32" width, 16" rise, Gloss...

Notched for electronic throttle control; drilled for internal wiring; made in the USA.

€95.08 €123.04

-€45.73

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 18" rise, 32" width, Chrome

Notched for electronic throttle control, drilled for internal wiring, made in the USA.

€129.23 €174.96

1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss Black

-€64.28

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 39" width, 10" rise, Gloss...

Diamond-knurled Buffalo touring handlebar machined for internal wiring and throttle-by-wire compatibility.

€181.66 €245.94

-€70.79

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 40" width, gloss black

Diamond-knurled touring handlebar pre-drilled for internal wiring; accepts stock controls and OEM heated grips; made in the USA.

€200.05 €270.84

-€70.79

DRAG SPECIALTIES [object Object]

1-1/4" Buffalo Touring handlebar with diamond knurling and internal wiring; accepts stock controls, compatible with electronic throttle control systems and H-D OEM heated grips. Made in the U.S.A.

€200.05 €270.84

Contact us

Products

Our company