Handlebars (3)

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 16" rise, 10" pullback, flat black

-€76.38
Out of Stock

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 16"...

Notched for throttle-by-wire, large burr-free wiring slots, accepts H-D OEM heated grips, pre-drilled and made in the U.S.A.

€297.07 €373.45

$1-1/4\" Twin Peaks Big Twin Handlebar — 1-1/4\" diameter, 33-1/2\" width, 10\" rise$

-€86.79

LA CHOPPERS 1-1/4\" Twin Peaks Big Twin Handlebar — 1-1/4\" diameter,...

A twist on the Ape Hanger design
Drilled for internal wiring
Notched for throttle-by-wire
Accepts H-D OEM heated grips

€337.45 €424.24

1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 13" rise, 33-1/2" width

-€86.79

LA CHOPPERS 1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 13"...

A modern take on the Ape Hanger with a mitered top and two-bend bottom. Drilled for internal wiring, notched for throttle-by-wire, knurled center, accepts H-D OEM heated grips. Made in the USA. Not for use with stock riser and handlebar clamp/gauge mount on XL 883/1200C models.

€337.45 €424.24

Narrow-Z Old School Handlebar — 24 in width, 8 in rise, 1 in diameter, flat black

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 24 in width, 8 in rise, 1 in...

Classic Narrow-Z handlebar, TIG welded and drilled for internal wiring; made in the U.S.A.

€192.34 €241.80

Narrow-Z Old School Handlebar — 24 in width, 10 in rise, 1 in diameter, Black

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 24 in width, 10 in rise, 1 in...

TIG-welded steel Z-bar, pre-drilled for internal wiring; made in the U.S.A.

€192.34 €241.80

Narrow-Z Old School Handlebar — 24" width, 12" rise, 1" diameter, Black, flat finish

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 24" width, 12" rise, 1"...

High-strength steel Z-bar handlebar with TIG welds and drilled routing for clean wiring.

€192.34 €241.80

-€35.04

DRAG SPECIALTIES 1" Touring Handlebar — 1" clamp, 12" rise, 31" width, flat black

Notched for electronic throttle control; drilled for internal wiring; smooth, unknurled grip sections; made in the USA.

€99.03 €134.07

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, 10" rise, flat black

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 31" width, 10"...

The ultimate 1-1/4" diameter handlebar designed for maximum comfort. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. Compatible with hydraulic clutch controls.

€186.20 €252.09

1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4") diameter, 10-1/2" center width, flat black

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4") diameter,...

Diamond-knurled Buffalo Touring handlebar that accepts stock controls, heated grips, and internal wiring.

€186.20 €252.09

1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 16" rise, 1" clamp

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 16" rise,...

Diamond-knurled center for internal wiring.

Accepts stock controls and handlebar clamp.

Designed for electronic throttle control systems and compatible with OEM heated grips.

Made in the USA.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 12" rise, 29" width, Black

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" (32 mm) diameter, 12" rise, 29"...

Buffalo T-Bar handlebar, notched for Throttle-By-Wire; optional gauge mounts sold separately; made in the U.S.A.; not for use with stock risers on 883C/1200C.

€186.20 €252.09

1-1/4" Buffalo T-Bar — 32 mm (1-1/4"), 73.5 cm (29"), 35.5 cm (14"), Black

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 32 mm (1-1/4"), 73.5 cm (29"), 35.5 cm...

Buffalo T-bar designed for maximum comfort. Optional gauge mounts sold separately. Made in the U.S.A. Compatible with hydraulic clutch controls.

€186.20 €252.09

1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamp, 25.5 cm (10") rise

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamp, 25.5...

Heavy-duty Twin Peaks handlebar compatible with OEM riser clamps and hydraulic clutches. Accepts Harley-Davidson OEM heated grips. Pre-drilled center and knurled for secure grip placement.

€392.66 €493.63

1-1/4 in Hefty Twin Peaks Handlebar — 32 mm (1-1/4 in), 33 cm (13 in), Chrome

-€100.97

LA CHOPPERS 1-1/4 in Hefty Twin Peaks Handlebar — 32 mm (1-1/4 in), 33 cm...

Wide-adjustment Twin Peaks handlebar compatible with OEM riser clamps, hydraulic clutches, and Harley-Davidson OEM heated grips.

€392.66 €493.63

1-1/4" Hefty Twin Peaks Handlebar — 32 mm clamp, 16" rise, 34" width, Chrome

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 32 mm clamp, 16" rise, 34"...

Twin Peaks handlebar with wide adjustment, pre-drilled center, compatible with OEM riser clamps and Harley-Davidson heated grips.

€392.66 €493.63

$1-1/4\" Hefty Twin Peaks Handlebar — 1-1/4\" clamp, 16\" rise, Black$

-€89.07

LA CHOPPERS 1-1/4\" Hefty Twin Peaks Handlebar — 1-1/4\" clamp, 16\" rise,...

More than 35° of adjustment; works with OEM riser clamps; no stock-pin removal required; compatible with hydraulic clutches; accepts Harley-Davidson OEM heated grips.

€346.42 €435.49

1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 19" rise, 34" width, Chrome

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 19" rise,...

Classic Twin Peaks ape-hanger styling with wide adjustment, fits OEM riser clamps, works with hydraulic clutches and Harley-Davidson OEM heated grips.

€392.66 €493.63

1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamping, 48.5 cm (19") rise, 23 cm (9") center width, Black

-€89.07

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamping,...

Wide adjustment range for personalized ergonomics.
Fits OEM riser clamps with correct wire exit; no stock-pin removal required.
Compatible with hydraulic clutches and Harley-Davidson OEM heated grips.

€346.42 €435.49

1-1/4" Moose Knuckle Touring Handlebar — 1-1/4" clamping diameter, 35" width, Black

-€62.62
Out of Stock

LA CHOPPERS 1-1/4" Moose Knuckle Touring Handlebar — 1-1/4" clamping...

Touring handlebar with extra pullback, internal wiring, pre-drilled for Throttle-By-Wire, and new black control clamps included.

€243.52 €306.14

1-1/4" Touring Handlebar — 1-1/4" diameter, 11-1/4" rise, 35" width, Chrome

-€86.41

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" diameter, 11-1/4" rise, 35"...

Direct bolt-on upgrade for Road Glide models; black control clamps replace oversize OEM clamps; knurled riser; accepts H-D OEM heated grips; compatible with stock controls and TBW.

€244.23 €330.64

1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 35" width, Black

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 32 mm (1-1/4") clamp, 35" width, Black

Direct bolt-on upgrade for Road Glide models; includes black replacement control clamps and knurled riser area for extra grip. Accepts H-D OEM heated grips and works with stock controls, for TBW or cable throttles.

€200.05 €270.84

1-1/4" Touring Handlebar — 15-1/4" rise, 35" width, 7" pullback

-€86.41

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 15-1/4" rise, 35" width, 7" pullback

Direct bolt-on touring handlebar for Road Glide, knurled center for extra grip, accepts H-D OEM heated grips and works with stock controls.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" clamping, 35" width, black gloss

-€51.91

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamping, 35" width, black...

Direct bolt-on touring handlebar for Road Glide; knurled riser area, accepts H-D heated grips, works with stock controls.

€176.49 €228.40

$1-1/4\" Touring Handlebar — 17-1/4\" rise, fits Road Glide$

-€86.41

DRAG SPECIALTIES 1-1/4\" Touring Handlebar — 17-1/4\" rise, fits Road Glide

Direct bolt-on upgrade for Road Glide; knurled riser area, accepts H-D heated grips, works with stock controls.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" clamp, 19-1/4" rise, 35" width, Chrome, fits Road Glide

-€86.41

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 19-1/4" rise, 35"...

Direct bolt-on upgrade for Road Glide; black control clamps, knurled riser, accepts H-D heated grips and supports TBW or cable throttles.

€244.23 €330.64

1-1/4" Touring Handlebar — 1-1/4" clamp, 19-1/4" rise, Black

-€70.79
Out of Stock

DRAG SPECIALTIES 1-1/4" Touring Handlebar — 1-1/4" clamp, 19-1/4" rise, Black

Direct bolt-on upgrade for Road Glide; black control clamps, knurled riser, accepts H-D heated grips, works with stock controls.

€200.05 €270.84

1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, 13-1/2" rise, black gloss

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, 13-1/2"...

1-1/4" diameter Buffalo T-bar. Optional gauge mounts sold separately. Not for use with stock risers and clamp on 883C/1200C models.

€186.20 €252.09

-€65.89

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 32 mm diameter, 17-1/2" end rise

T-bar handlebar designed for comfort and control. Optional gauge mounts sold separately. Made in the U.S.A.

€186.20 €252.09

Nice Curves Ape Hanger Handlebar — 32" width, 12" rise, 1" clamp, Chrome

-€99.38

LA CHOPPERS Nice Curves Ape Hanger Handlebar — 32" width, 12" rise, 1"...

Pre-drilled for internal wiring; notched for throttle-by-wire; compatible with hydraulic clutch systems. Made in the United States.

€386.51 €485.89

-€87.50

LA CHOPPERS Nice Curves Ape Hanger Handlebar — 32" width, 12" rise, 1" clamp

Drilled for internal wiring, notched for throttle-by-wire, compatible with hydraulic clutch systems, accepts heated grips, pre-drilled with a knurled center. Made in the U.S.A.

€340.26 €427.76

Contact us

Products

Our company