Handlebars (2)

1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 23 cm center width, 81.5...

Strip-style handlebar with internal wiring slots and throttle notch.

Polished welds
Pre-drilled for controls
Works with OEM heated grips

€307.16 €386.14

1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"), Rise 38 cm (15")

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — Clamping diameter 38 mm (1-1/2"),...

Strip-style ape hanger profile for a custom look
Slotted for internal wiring and pre-drilled
Notched for electronic throttle; accepts heated grips
Requires special risers and clamps

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width, 45.5 cm rise

-€82.94

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamping diameter, 89 cm width,...

Strip handlebar with polished welds, slots for internal wiring, and a throttle notch. Made in the USA.

€322.53 €405.47

1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

-€78.98

TODD'S CYCLE 1-1/2" Strip Handlebar — 38 mm clamp, 53.3 cm rise, 89 cm width

Clean ape-hanger style with internal wiring slots, throttle notch, polished welds, and OEM heated-grip compatibility.

€307.16 €386.14

V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"), Black anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm (31-1/2"), 28.6 mm (1-1/8"),...

Moto-style anodized handlebar with slotted internal routing and notches for throttle-by-wire. Knurled clutch end improves grip adhesion.

€85.00 €115.08

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€80.34

TODD'S CYCLE 1" Strip Handlebar — Width 69 cm (27-1/4"), Rise 20.5 cm (8")

Stripper-style handlebar made from thick-wall steel with polished welds, slotted for internal wiring and no knurling.

€312.43 €392.77

-€76.67

TODD'S CYCLE 1" Strip Handlebar — 75 cm (29-1/2"), 1" clamp, chrome

Strip handlebar slotted for internal wiring, pre-drilled for controls, with polished welds and a smooth, unknurled grip. Made in the U.S.A.

€298.17 €374.84

1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise, Black

-€80.34

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 75 cm width, 30.5 cm rise,...

Classic 1" Strip handlebar with polished welds, slots for internal wiring, and a smooth, unknurled grip. Made in the U.S.A.

€312.43 €392.77

-€80.34

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 33-1/4" width, 17" rise, Chrome

Classic "Stripper" handlebar with polished welds and internal wiring slot. Pre-drilled and made in the U.S.A.

€312.43 €392.77

1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"), 17" rise, Black gloss

-€76.50

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm width (33-1/4"),...

Strip-style 1" handlebar in thick-wall steel, polished welds, slotted for internal wiring, pre-drilled and unknurled.

€297.55 €374.05

-€72.86

TODD'S CYCLE 1" Strip Handlebar — 25.4 mm clamp, 84.5 cm (33-1/4") width

The "Stripper" handlebar features thick-wall steel construction, polished welds, slotted routing for internal wiring, and no knurling.

€283.33 €356.19

1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28" (71 cm) width, 8-1/2" (21.5 cm) rise, Black

-€80.10

TODD'S CYCLE 1-1/4" Blackline Club Handlebar — 32 mm (1-1/4") diameter, 28"...

Mounts with stock hardware; slotted for internal wiring; made in the U.S.A.

€311.52 €391.62

-€76.26

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 29-1/2" width, 14" rise

Classic Strip handlebar with a smooth, pre-drilled design and polished welds; slotted for internal wiring and made in the U.S.A.

€296.60 €372.86

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 14" rise, 29" width

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; preserves clear sightlines to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1" clamp, 13" rise, chrome

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

Designed for batwing fairings; notched for throttle-by-wire; laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13" rise, 36-1/2" width

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13"...

Notched for throttle-by-wire; large laser-cut, burr-free wiring slots; designed for batwing fairings; allows factory heated grips and stock controls; made in the U.S.A.

€363.73 €457.25

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm (1\") clamp, 30\" (76 cm) width$

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm...

Polished-weld strip handlebar with slotted wiring, hydraulic clutch compatibility, and heated-grip support.

€338.66 €425.74

1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutches, works with heated grips, maintains clear sightlines to stock mirrors. Made in the U.S.A.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm (31\") wide, Chrome$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€347.13 €436.38

1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5 cm (10")

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4"), 78.5 cm (31"), 25.5...

Strip handlebar with polished welds, slotted wiring options, hydraulic clutch compatibility, and support for heated grips.

€338.66 €425.74

1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter, 77.5 cm (30-1/2") width, 11.5 cm (4-1/2") rise

-€92.58

TRASK 1-1/4" V-Line Handlebar — 32 mm (1-1/4") clamping diameter,...

Seamless DOM mild steel construction, pre-drilled for internal wiring, notched for throttle-by-wire, made in the U.S.A.

€360.06 €452.64

-€95.20

TRASK 1-1/4" V-Line Handlebar — 1" clamp, 32-1/4" width, 8-1/2" rise

Seamless DOM mild steel V-Line handlebar, drilled for internal wiring and notched for throttle-by-wire.

€370.25 €465.45

Contact us

Products

Our company