Handlebars (2)

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 16" rise, 10" pullback, flat black

-€76.38

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 16"...

Notched for throttle-by-wire, large burr-free wiring slots, accepts H-D OEM heated grips, pre-drilled and made in the U.S.A.

€297.07 €373.45

$1-1/4\" Twin Peaks Big Twin Handlebar — 1-1/4\" diameter, 33-1/2\" width, 10\" rise$

-€86.79

LA CHOPPERS 1-1/4\" Twin Peaks Big Twin Handlebar — 1-1/4\" diameter,...

A twist on the Ape Hanger design
Drilled for internal wiring
Notched for throttle-by-wire
Accepts H-D OEM heated grips

€337.45 €424.24

1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 13" rise, 33-1/2" width

-€86.79

LA CHOPPERS 1-1/4" Twin Peaks Big Twin Handlebar — 1-1/4" diameter, 13"...

A modern take on the Ape Hanger with a mitered top and two-bend bottom. Drilled for internal wiring, notched for throttle-by-wire, knurled center, accepts H-D OEM heated grips. Made in the USA. Not for use with stock riser and handlebar clamp/gauge mount on XL 883/1200C models.

€337.45 €424.24

Narrow-Z Old School Handlebar — 24 in width, 8 in rise, 1 in diameter, flat black

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 24 in width, 8 in rise, 1 in...

Classic Narrow-Z handlebar, TIG welded and drilled for internal wiring; made in the U.S.A.

€192.34 €241.80

Narrow-Z Old School Handlebar — 24 in width, 10 in rise, 1 in diameter, Black

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 24 in width, 10 in rise, 1 in...

TIG-welded steel Z-bar, pre-drilled for internal wiring; made in the U.S.A.

€192.34 €241.80

$Narrow-Z Old School Handlebar — 61 cm (24\"), 30.5 cm (12\"), 25.4 mm (1\"), flat black$

-€49.46

LA CHOPPERS Narrow-Z Old School Handlebar — 61 cm (24\"), 30.5 cm (12\"),...

Made with high-strength steel tubing, TIG welded, drilled for internal wiring, made in the U.S.A.

€192.34 €241.80

1-1/4" Caliber Handlebar Installation Kit — 1" clamp, Chrome

-€162.72
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1" clamp, Chrome

Complete Magnum Caliber handlebar kit with braided cables, brake lines, and hardware for straightforward installation.

€611.27 €773.99

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 35" width, Chrome

-€162.93

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum Caliber handlebar kit with matching braided cables, preloaded E-Z sleeving, and all necessary hardware. Assembled in the USA.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 7-3/4" center width, Chrome

-€163.18
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Premium Magnum 1-1/4" Caliber handlebar installation kit with matching braided cables and brake lines for easy, reliable fitment.

€613.03 €776.21

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 7-3/4" center width, Chrome

-€162.93

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum 1-1/4" Caliber handlebar installation kit with braided cables, brake lines, hardware, and preloaded E‑Z pull‑thru sleeving.

€612.14 €775.07

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 1" clamp, 7-3/4" center, gloss black

-€164.12

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum 1-1/4" Caliber handlebar kit with braided cables, brake lines, hardware and E‑Z sleeving for easy installation.

€616.53 €780.65

1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamp, 25.5 cm (10") rise

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamp, 25.5...

Heavy-duty Twin Peaks handlebar compatible with OEM riser clamps and hydraulic clutches. Accepts Harley-Davidson OEM heated grips. Pre-drilled center and knurled for secure grip placement.

€392.66 €493.63

1-1/4" Hefty Twin Peaks Handlebar — 34" width, 32 mm (1-1/4") clamp, Chrome

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 34" width, 32 mm (1-1/4")...

Durable Twin Peaks handlebar with wide adjustment range; fits OEM riser clamps, works with hydraulic clutches and OEM heated grips.

€392.66 €493.63

1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 16" rise, 34" width, Chrome

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 16" rise,...

Oversized clamping area with a wide adjustment range. Works with OEM riser clamps, hydraulic clutches, and H-D OEM heated grips.

€392.66 €493.63

$1-1/4\" Hefty Twin Peaks Handlebar — 1-1/4\" clamp, 16\" rise, Black$

-€89.07

LA CHOPPERS 1-1/4\" Hefty Twin Peaks Handlebar — 1-1/4\" clamp, 16\" rise,...

More than 35° of adjustment; works with OEM riser clamps; no stock-pin removal required; compatible with hydraulic clutches; accepts Harley-Davidson OEM heated grips.

€346.42 €435.49

1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 19" rise, 34" width, Chrome

-€100.97

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 1-1/4" clamp, 19" rise,...

Classic Twin Peaks ape-hanger styling with wide adjustment, fits OEM riser clamps, works with hydraulic clutches and Harley-Davidson OEM heated grips.

€392.66 €493.63

1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamping, 48.5 cm (19") rise, 23 cm (9") center width, Black

-€89.07

LA CHOPPERS 1-1/4" Hefty Twin Peaks Handlebar — 32 mm (1-1/4") clamping,...

Wide adjustment range for personalized ergonomics.
Fits OEM riser clamps with correct wire exit; no stock-pin removal required.
Compatible with hydraulic clutches and Harley-Davidson OEM heated grips.

€346.42 €435.49

1-1/4" Moose Knuckle Touring Handlebar — 1-1/4" clamping diameter, 35" width, Black

-€62.62
Out of Stock

LA CHOPPERS 1-1/4" Moose Knuckle Touring Handlebar — 1-1/4" clamping...

Touring handlebar with extra pullback, internal wiring, pre-drilled for Throttle-By-Wire, and new black control clamps included.

€243.52 €306.14

1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter, 12" center

-€218.07
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar Installation Kit — 1-1/4" diameter,...

Complete Magnum Caliber handlebar kit with braided cables, preloaded wiring sleeve, and OE-grade components.

€819.20 €1,037.27

1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-1/2" width, Ape Hanger, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-1/2"...

Precision-machined caliber handlebar with burr-free wiring provisions and E-Z pull-thru sleeving. Assembled in the USA. Not compatible with stock risers on 883C/1200C models.

€268.64 €340.14

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, Chrome

Machined control mounts, CNC mandrel bent, pre-loaded E-Z pull-thru sleeving. Assembled in U.S.A. Not for use with stock risers on 883C/1200C.

€268.64 €340.14

1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-3/4" width, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" diameter, 1" clamp, 34-3/4"...

Precision-machined 1-1/4" diameter handlebar with 1" clamp area, pre-loaded E-Z sleeving for easy wiring, CNC mandrel bent. Not compatible with stock risers on 883C/1200C models.

€268.64 €340.14

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width, 14-1/2" rise, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...

Precision CNC mandrel-bent 1-1/4" handlebar with machined control mounts, E-Z pull-thru sleeving, and comfortable wrist angles.

€268.64 €340.14

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width, Chrome

-€71.50

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 12" center width,...

Machined mounts and laser-cut holes for clean wiring.

Pre-loaded with E-Z sleeving; accepts heated grips; compatible with hydraulic clutch and throttle-by-wire.

Assembled in the USA.

€268.64 €340.14

$1-1/4\" Caliber Handlebar — 1-1/4\" diameter, 1\" clamp, Black$

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4\" Caliber Handlebar — 1-1/4\" diameter, 1\" clamp, Black

Premium Caliber handlebar with machined control mounts, burr-free wiring slots, E-Z pull-thru sleeving, and comfortable wrist angles for improved riding comfort.

€268.84 €340.40

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp)

Precision-built Caliber handlebar with machined control mounts, E‑Z pull-thru sleeving, and CNC mandrel bend; assembled in the USA.

€268.84 €340.40

$1-1/4\" Caliber Handlebar — 1-1/4\" diameter, 1\" clamp, 16\" rise, 8\" pullback$

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4\" Caliber Handlebar — 1-1/4\" diameter, 1\" clamp, 16\"...

1-1/4\" Caliber handlebar with machined control mounts, knurled center, and CNC mandrel bends for precise fit and comfort.

€268.84 €340.40

1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 34-3/4" width, Black gloss

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" dia, 1" clamp, 34-3/4"...

High-quality Caliber handlebar with machined control mounts, laser-cut wiring openings, CNC mandrel bends, E-Z pull-thru sleeving, and U.S. assembly. Not compatible with stock risers on 883C/1200C models.

€268.84 €340.40

1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp), 12" center, Black gloss

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 32 mm (1-1/4"), 25.4 mm (1" clamp),...

High-quality machined control mounts and laser-cut, burr-free wiring slots for throttle-by-wire compatibility.

CNC mandrel-bent for accurate fit and comfortable wrist angles, pre-loaded with E-Z pull-thru sleeving.

Assembled in the USA. Not compatible with stock risers on 883C/1200C.

€268.84 €340.40

1-1/4" Caliber Handlebar — 1-1/4" (32 mm), 1" clamp, 12" center width, Black

-€71.56
Out of Stock

MAGNUM SHIELDING 1-1/4" Caliber Handlebar — 1-1/4" (32 mm), 1" clamp, 12"...

Durable Caliber handlebar with machined mounts, CNC mandrel bends, and pre-loaded sleeves for easier wiring.

€268.84 €340.40

Contact us

Products

Our company