Handlebars (2)

-€76.26

TODD'S CYCLE 1" Strip Handlebar — 1" clamp, 29-1/2" width, 14" rise

Classic Strip handlebar with a smooth, pre-drilled design and polished welds; slotted for internal wiring and made in the U.S.A.

€296.60 €372.86

-€89.07

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" diameter, 14" rise, 29" width

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; preserves clear sightlines to stock mirrors; made in the U.S.A.

€346.41 €435.48

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1" clamp, 13" rise, chrome

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 1"...

Designed for batwing fairings; notched for throttle-by-wire; laser-cut wiring slots; fits factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13" rise, 36-1/2" width

-€93.52

TODD'S CYCLE 1-1/4" Bagger Ape Hanger Handlebar — 1-1/4" diameter, 13"...

Notched for throttle-by-wire; large laser-cut, burr-free wiring slots; designed for batwing fairings; allows factory heated grips and stock controls; made in the U.S.A.

€363.73 €457.25

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18" rise, 12" center width, Chrome

-€88.66

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18"...

High-rise ape hanger designed for batwing fairings on FLHT/FLHX models; notched for throttle-by-wire and compatible with factory heated grips.

€344.80 €433.46

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18" rise, 37" width, Gloss Black

-€76.38

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" diameter, 18"...

Touring ape hanger designed to clear batwing fairings on FLHT/FLHX models.

Notched for throttle-by-wire with large laser-cut wiring slots for tidy routing.

Pre-drilled and knurled center; allows factory heated grips and all stock controls. Made in the USA.

€297.07 €373.45

1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 20" rise, 12" center, Chrome

-€88.66

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 1-1/4" dia, 20" rise,...

Clearance-designed ape hanger for FLHT/FLHX batwing fairings; notched for throttle-by-wire and accepts factory heated grips.

€344.80 €433.46

1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter, 20" rise, fits FLHT/FLHX batwing, Black gloss

-€76.38

LA CHOPPERS 1-1/4" Touring Ape Hanger Handlebar — 32 mm (1-1/4") diameter,...

Designed to provide proper clearance for FLHT/FLHX batwing fairings. Notched for throttle-by-wire. Large laser-cut, burr-free wiring slots. Allows factory heated grips and all stock controls. Made in the USA.

€297.07 €373.45

1-1/4" Handlebar — 1-1/4" diameter, 10" rise, 3-1/2" clamp width, Chrome

-€81.43

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 10" rise, 3-1/2" clamp...

Ape-hanger handlebar that accepts standard grips and controls, pre-drilled and made in the USA.

€316.69 €398.12

-€81.43

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 3-1/2" clamp width, 12" rise

Ape-hanger handlebar that fits stock-style clamps, accepts standard grips and controls, and supports H-D OEM heated grips. Made in the USA.

€316.69 €398.12

-€81.43

LA CHOPPERS 1-1/4" Handlebar — 1-1/4" diameter, 18" rise, 40" width, 1" clamp

For use in 1" stock-style handlebar clamps; accepts standard grips and controls; fits most models with 3-1/2" on-center risers; not for 883C/1200C mounts; accepts H-D OEM heated grips.

€316.69 €398.12

-€69.17
Out of Stock

LA CHOPPERS 1-1/4" Handlebar — 1" clamp, 3-1/2" clamp width, gloss black

Classic ape-hanger handlebar that accepts standard grips and H-D OEM heated grips. Not compatible with certain stock riser and clamp gauge mounts on 883C/1200C models.

€268.95 €338.12

-€69.17

LA CHOPPERS 1-1/4" Handlebar — 12" rise, 3-1/2" clamping width, Black

Fits 1" stock-style clamps, accepts standard grips and controls, knurled and pre-drilled center, accepts H-D OEM heated grips; not for use on 883C/1200C stock clamp/gauge mounts.

€268.95 €338.12

-€98.67

LA CHOPPERS 1-1/4" Twin Peaks Big Twin Handlebar — 19" rise, 36" width

A Twin Peaks take on the Ape Hanger with pre-drilled internal wiring, throttle-by-wire notches, and knurled center for secure controls. Accepts H-D OEM heated grips.

€383.70 €482.37

1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) diameter, 12" (30.5 cm) center width, 18" rise, Chrome

-€98.67

LA CHOPPERS 1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) diameter,...

Twin Peaks touring handlebar engineered for long-distance comfort, parallel wrist angles, easy internal wiring, and compatibility with H-D OEM heated grips.

€383.70 €482.37

1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) dia, 18" rise, 33-1/2" width, 5-1/4" pullback

-€86.79

LA CHOPPERS 1-1/4" Twin Peaks Touring Handlebar — 1-1/4" (32 mm) dia, 18"...

Touring-focused Twin Peaks handlebar that reduces wrist strain and simplifies internal wiring.

€337.45 €424.24

$1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm (1\") clamp, 30\" (76 cm) width$

-€87.08
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm (1-1/4\") diameter, 25.4 mm...

Polished-weld strip handlebar with slotted wiring, hydraulic clutch compatibility, and heated-grip support.

€338.66 €425.74

1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

-€87.08

TODD'S CYCLE 1-1/4" Strip Handlebar — 1-1/4" clamp, 32" width, 12" rise

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutches, works with heated grips, maintains clear sightlines to stock mirrors. Made in the U.S.A.

€338.66 €425.74

$1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm (31\") wide, Chrome$

-€89.25

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamping diameter, 78.5 cm...

Polished welds, slotted for internal or external wiring, compatible with hydraulic clutch and heated grips.

€347.13 €436.38

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width, 9-1/2" rise, Chrome

-€59.77

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 34-1/2" width,...

Ultimate 1-1/4" diameter Buffalo Bar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility.

€203.23 €263.00

1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp, 20-1/2" rise

-€86.41
Out of Stock

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" diameter, 1" clamp,...

Diamond-knurled Buffalo touring handlebar accepts stock controls and OEM heated grips; pre-drilled for internal wiring.

€244.23 €330.64

1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4") diameter, 33 cm (13") rise, Chrome

-€91.33

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 32 mm (1-1/4") diameter, 33...

Diamond-knurled buffalo touring handlebar with internal wiring, throttle-by-wire compatibility, and heated-grip acceptance. Made in the USA.

€258.10 €349.43

1-1/4" Buffalo Touring Handlebar — 1-1/4" (32 mm) diameter, 37" width, Chrome

-€91.33

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 1-1/4" (32 mm) diameter,...

Classic buffalo sweep with modern features; accepts OEM heated grips and electronic throttle control.

€258.10 €349.43

1-1/4" Buffalo Touring Handlebar — 17" rise, Buffalo bend, black gloss

-€75.70

DRAG SPECIALTIES 1-1/4" Buffalo Touring Handlebar — 17" rise, Buffalo bend,...

Touring-ready Buffalo handlebar with knurled center, internal wiring capability, and compatibility with heated grips.

€213.93 €289.63

$1-1/4\" Buffalo T-Bar — 32 mm (1-1/4\"), 29\" width, Chrome$

-€79.05

DRAG SPECIALTIES 1-1/4\" Buffalo T-Bar — 32 mm (1-1/4\"), 29\" width, Chrome

Classic Buffalo T-Bar offering improved comfort. Optional gauge mounts sold separately. Not compatible with stock risers on 883C/1200C models.

€223.40 €302.45

1-1/4" Buffalo T-Bar — Chrome, Not for use with stock risers on 883C/1200C

-€81.03

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — Chrome, Not for use with stock risers...

High-comfort Buffalo T-Bar handlebar.

Optional gauge mounts sold separately.

Made in the U.S.A.

Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

Compatible with hydraulic clutch controls.

€228.98 €310.01

-€83.14

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 30" width, Chrome

Comfort-focused Buffalo T-Bar with optional gauge mounts. Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. Compatible with hydraulic clutch controls.

€234.93 €318.07

-€67.98

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, black gloss

Comfort-oriented T-bar handlebar. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers on 883C/1200C models. Compatible with hydraulic clutch controls.

€192.14 €260.12

-€81.43
Out of Stock

LA CHOPPERS [object Object]

1-1/4" handlebar for 1" stock-style clamps. Accepts standard grips and controls; fits most models with 3-1/2" on-center risers. Made in the U.S.A. Not for use with stock riser/handlebar clamp gauge mounts on 883C/1200C models. Accepts H-D OEM heated grips.

€316.69 €398.12

1-1/4" Handlebar — 32 mm diameter, 16" rise, 3-1/2" clamp width, Black Gloss

-€69.17

LA CHOPPERS 1-1/4" Handlebar — 32 mm diameter, 16" rise, 3-1/2" clamp...

Made in the USA. Fits most models with risers 3-1/2" on-center. Accepts H-D OEM heated grips.

€268.95 €338.12

Contact us

Products

Our company