Carburetors & Accesories (17)

-€5.19
Out of Stock

JIMS Staking Dowel Pins — Silver, 10-pack

Precision fasteners that hold bushings in place. Made in the USA.

€20.16 €25.35

Cam Bearing and Bushing Alignment Tool — '70-'99 Big Twin & aftermarket cases (except Twin Cam)

-€30.77
Out of Stock

JIMS Cam Bearing and Bushing Alignment Tool — '70-'99 Big Twin &...

Checks cam bearing to cam cover bushing alignment to within 0.0003"; binding indicates misalignment. Fits '70-'99 Big Twin and aftermarket cases (except Twin Cam). Made in the USA.

€119.66 €150.43

Twin Cam "B" Motor Crankshaft Bearing Tool — Black

-€112.79
Out of Stock

JIMS Twin Cam "B" Motor Crankshaft Bearing Tool — Black

Protects engine cases during cam-side crankshaft bearing removal or installation. Special support block design. Made in the USA.

€438.67 €551.46

-€4.84
Out of Stock

DRAG SPECIALTIES Points and Condenser Kit — Silver finish

Durable contact sets and a sealed condenser for reliable ignition; meets or exceeds OEM specifications.

€13.67 €18.51

Smooth Chrome Constant Velocity Carburetor Top Cover — For CV carburetors

-€5.24
Out of Stock

DRAG SPECIALTIES Smooth Chrome Constant Velocity Carburetor Top Cover — For CV...

Quick, bolt-on installation using the four OEM screws
Replaces the OEM top cover for a cleaner look
No modifications required

€14.81 €20.05

Carb Support Bracket 84-89 BT — Chrome, Black

-€6.02
Out of Stock

DRAG SPECIALTIES Carb Support Bracket 84-89 BT — Chrome, Black

Support bracket for carburetors on 1984–1989 Big Twin models. Reduces intake stress and helps maintain proper alignment.

€17.00 €23.02

-€5.96
Out of Stock

DRAG SPECIALTIES Chrome Intake Manifold Flange — Pair

Direct-replacement intake manifold flanges designed for a secure seal; sold as a set.

€16.84 €22.80

-€20.56
Out of Stock

DYNOJET-HARLEY Recalibration Jet Kit — Gold, Brass

Jets, needles and instructions to recalibrate stock Keihin CV carbs for broad-range performance gains while maintaining stock driveability.

€79.93 €100.49

-€33.97
Out of Stock

DYNOJET-HARLEY Thunderslide Jet Kit — Gold finish

Revolutionary composite slide and tuned jets for improved horsepower, mileage and throttle response. Complete kit for CV carburetors.

€132.14 €166.11

-€27.74
Out of Stock

DYNOJET-HARLEY Recalibration Jet Kit — Gold

Includes jets, needles and instructions to recalibrate Keihin CV carbs for broader performance while maintaining stock driveability. Made in the USA.

€107.84 €135.58

-€42.37
Out of Stock

DYNOJET-HARLEY Stage 7 Thunderslide with Jet Kit — 44 mm

Faster throttle response, increased horsepower and mileage; complete CV carb kit for 80+ hp engines.

€164.78 €207.15

-€42.37
Out of Stock

DYNOJET-HARLEY Stage 7 Thunderslide with Jet Kit — 44 mm, for 80+ hp engines

Performance jet kit for 80+ hp engines; includes jets, needles, clips and a taller carburetor top to improve throttle response.

€164.78 €207.15

-€10.19
Out of Stock

S&S CYCLE Main Jets — 0.062, 5-pack

Ideal for tuning most stock and performance engines. Made in the USA.

€39.65 €49.84

-€11.33
Out of Stock

S&S CYCLE Main Jets — 0.066, 5-pack, for S&S carburetors

Precision carburetor components for tuning most stock and performance engines. Made in the USA. Consistent manufacturing for reliable fuel delivery.

€44.01 €55.34

-€10.45
Out of Stock

S&S CYCLE Main Jets — 0.074, 5 pack, Brass

For jetting most stock and performance engines. Made in the USA.

€40.64 €51.09

-€10.45
Out of Stock

S&S CYCLE Main Jets — Jet size 0.076, 5 pack

For jetting most stock and performance engines. Made in the USA.

€40.64 €51.09

-€6.26
Out of Stock

MIKUNI Air Box Adapter Kit — MIKUNI, HS42/001-K, Black/Silver

Includes carburetor-to-CV air box adapter and 3 mounting screws. Made in Japan.

€24.33 €30.59

Jet Needle for HSR42/45/48 Carburetor — 2.98 mm, for HSR 42, silver

-€2.74
Out of Stock

MIKUNI Jet Needle for HSR42/45/48 Carburetor — 2.98 mm, for HSR 42,...

Genuine Mikuni jet needle. Made in Japan. Fits HSR series carburetors. Sold each.

€10.66 €13.40

Genuine Mikuni HSR Carburetor Rebuild Kit — For HSR 42/45, Black

-€8.56
Out of Stock

MIKUNI Genuine Mikuni HSR Carburetor Rebuild Kit — For HSR 42/45, Black

Complete rebuild kit with gaskets, O-rings, jets, float bowl parts and hardware — includes all parts needed to overhaul compatible carburetors.

€33.27 €41.83

Carburetor Jet Assortment Kit — For HSR 42, Gold

-€23.81
Out of Stock

MIKUNI Carburetor Jet Assortment Kit — For HSR 42, Gold

Comprehensive assortment of precision fuel nozzles in a labeled, portable case. Includes cleaning needle and reference chart. Made in Japan.

€92.60 €116.41

Genuine Mikuni HSR Carburetor Rebuild Kit — for HSR 48, Black

-€8.56
Out of Stock

MIKUNI Genuine Mikuni HSR Carburetor Rebuild Kit — for HSR 48, Black

Complete rebuild kit with all seals, needles and hardware to restore HSR carburetor performance.

€33.27 €41.83

Genuine Mikuni 4/042 Main Jets — 110, 4 pack

-€3.80
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 110, 4 pack

Main jets for Mikuni VM series and TMX carburetors; verify dimensions before ordering. Made in Japan.

€14.82 €18.62

Genuine Mikuni 4/042 Main Jets — 125, 4-pack, 12.00 mm

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 125, 4-pack, 12.00 mm

Replacement main jets for Mikuni carburetors; fit VM18, VM24-512, VM26-512, VM26-606 and TMX series. Made in Japan. Check dimensions before ordering.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — 180 main jet, For VM carburetors, 4-pack

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 180 main jet, For VM...

Fits Mikuni VM18, VM24-512, VM26-512, VM26-606 and TMX series. Made in Japan. Check dimensions before ordering.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — 190 jet, for VM carburetors, 4-pack

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 190 jet, for VM carburetors,...

Fits Mikuni VM18, VM24-512, VM26-512, VM26-606 and TMX series; also compatible with several OE applications—check dimensions before ordering. Made in Japan.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — 250, 12.00 mm, 4-Pack

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 250, 12.00 mm, 4-Pack

Fits select Mikuni carburetors (VM18, VM24/VM26, TMX series). Made in Japan. Verify dimensions before ordering.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — Jet size 260, Length 12.00 mm, 4-pack

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — Jet size 260, Length 12.00...

Fits Mikuni VM18 (clamp on), VM24-512, VM26-512, VM26-606 and TMX series; check dimensions before ordering. Made in Japan.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — Jet 270, 12.00 mm, For VM carburetors, 4-pack

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — Jet 270, 12.00 mm, For VM...

Direct-fit main jets for Mikuni carburetors originally provided with 4/042 jets. Verify fitment before ordering. Made in Japan.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — Jet 300, 4-pack, 12 mm

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — Jet 300, 4-pack, 12 mm

Fits Mikuni VM18 (clamp on), VM24-512, VM26-512, VM26-606 and TMX series. Also fits several OE applications; check dimensions before ordering. Made in Japan.

€14.45 €18.17

Genuine Mikuni 4/042 Main Jets — 310 jet, main, 4 pack, 12.00 mm

-€3.72
Out of Stock

MIKUNI Genuine Mikuni 4/042 Main Jets — 310 jet, main, 4 pack, 12.00 mm

Fits VM18 (clamp on), VM24-512, VM26-512, VM26-606, TMX Series and select OE applications. Check dimensions before ordering. Made in Japan.

€14.45 €18.17

Contact us

Products

Our company