Internal Parts

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, Aluminum

Improves oil drainage to the rocker; reduces oil misting from engine breathers; machined T-6061 billet construction; made in the U.S.A.

€233.41 €293.43

-€98.73

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€172.78 €271.51

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — 0.8420 in, Part No. 1820

Performs as a hydraulic tappet up to 5,500 rpm, then converts to solid for an estimated 3–6 usable hp; prevents hydraulic pump and requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€2.75

COLONY OEM-Style Oil Pump Plug — Chrome

Precision OEM-style oil pump plug for reliable sealing and easy installation. Made in the USA.

€7.80 €10.55

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€25.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€58.68 €83.83

-€4.35

EMGO Crankcase Vent Filter — chrome base

One-piece chrome-top vent filter with hose clamp and die-cast mounting base. Accepts 3/8" i.d. hose. Replacement filter 14-20905.

€12.28 €16.63

Crankcase Replacement Filter — 14-20905, Chrome

-€2.89

EMGO Crankcase Replacement Filter — 14-20905, Chrome

Replacement element for crankcase ventilation. For use only with crankcase vent filter.

€5.37 €8.26

-€2.57

EMGO Crankcase Vent Filter — 3/8 in inner diameter

Compact crankcase vent filter for reliable ventilation and easy installation.

€4.78 €7.35

-€2.61

COLONY Tappet Adjuster Locknuts — 4-pack

Split locknuts with 9/32"-32 thread; made in the U.S.A.

€7.39 €10.00

-€14.73

COLONY Replacement Aluminum Pushrods — Set of 4

Aircraft-grade pushrods with heat-treated steel tips; fits stock stroke lengths.

€57.31 €72.04

-€17.48

COLONY Replacement Cylinder Stud Set — 8-pack

Heat-treated studs that meet or exceed original equipment standards for reliable clamping and long service life.

€67.95 €85.43

-€16.93

COLONY Twin Cam Quick Install Lower Pushrod Tube Kit — 4-pack, lower

Kit that provides four short lower tubes and clips for easy access to the adjuster and lock nuts when installing adjustable pushrods on Twin Cam motors.

€65.86 €82.79

-€16.53

COLONY Pushrod Tube Kit — Chrome, Inner mounting, Set of 4

OEM-duplicate pushrod tube kits for proper fitment. Upper, lower and inner cover kits sold separately. Made in the U.S.A.

€20.77 €37.30

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

-€30.23

JIMS Crank Pin — 3-hole, Silver

Quality replacement that equals or exceeds OEM specifications. Made in the U.S.A.

€117.56 €147.79

-€25.75

JIMS Billet Tappet Guide — 7075-T6 aluminum

Precision-machined billet tappet guide with helical grooves for improved lubrication. Made in the U.S.A.

€100.16 €125.91

-€22.74

JIMS Motor Sprocket Shaft — JIMS, 24001-30

Precision-machined motor sprocket shaft for reliable power transfer. Made in the U.S.A.

€88.47 €111.21

-€34.23

JIMS Pinion Gear Shaft — JIMS 24006-73

Precision pinion gear shaft engineered for smooth gearbox operation. Made in the U.S.A.

€133.14 €167.37

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

Internal Parts

Contact us

Products

Our company