Internal Parts (5)

Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure 285 lb, Seat pressure 83 lb

-€162.77

KIBBLEWHITE Beehive Valve™ Spring Kit — Spring lift 0.640", Open pressure...

Progressive beehive springs for improved valve control and reduced coil mass.

Includes Posi-Loc™ style retainers and heat-treated basewashers.

Made in the USA; OEM-style valve keys sold separately.

€459.65 €622.42

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black

Includes upper and lower tubes, clips, cups, springs and washers; O-rings/corks sold separately. One kit completes an engine.

€81.16 €109.88

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€76.40

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€215.92 €292.32

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

-€13.34

DRAG SPECIALTIES Chrome Tie-Link — Chrome

Precision connector that reduces steering wobble and offers simple bolt-on installation. Supplied individually.

€37.69 €51.03

-€5.27

DRAG SPECIALTIES Swingarm Isolator Mount — Black

Vibration-isolating swingarm mount that meets or exceeds OE specifications for reliable performance and straightforward installation.

€14.90 €20.17

-€5.22

DRAG SPECIALTIES Isolator Mount — Front mounting, Black

Vibration-damping mount engineered to meet or exceed OEM specifications.

€14.76 €19.98

-€5.05

DRAG SPECIALTIES Isolator Mount — Rear, Black

Durable replacement component that reduces vibration and protects hardware. Meets or exceeds OEM specifications.

€14.27 €19.32

-€12.24

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome

Reduces engine mount movement and improves stability. Includes mounting hardware for easy installation.

€34.58 €46.82

-€15.51

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome, E17-0649

Reduces engine movement and vibration; includes mounting hardware for easy installation.

€43.84 €59.35

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Front, Black

High-quality replacement motor mount that meets or exceeds OEM specifications; installs using OEM hardware.

€88.86 €120.31

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement isolator that meets or exceeds OEM specifications and installs using OEM hardware.

€88.86 €120.31

-€32.66

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement motor mount that meets or exceeds OEM specs and installs with OEM hardware.

€92.32 €124.98

-€33.40

DRAG SPECIALTIES Rear Isolator Mount Kit — E28-0021K, Black

Complete kit with all parts to replace rear isolator mounts, including OEM part numbers for direct fitment.

€94.40 €127.80

-€28.30

DRAG SPECIALTIES Rear Isolator Mount Kit — E28-0022K, Black, Rear

Complete kit with all parts to replace rear isolator mounts, including OEM isolators, mount, lock plate, pivot options, and hardware.

€79.98 €108.28

-€12.43

DRAG SPECIALTIES Iso-Mount™ Motor Mount — Front, Black

High-durability isolator designed to reduce vibration and out-last OEM parts.

€35.15 €47.58

-€13.49

DRAG SPECIALTIES Motor Mount — Black, Front

Durable motor mount engineered to reduce engine vibration and out-last the stock unit.

€38.14 €51.63

-€13.77

DRAG SPECIALTIES Motor Mount — Front, Black

Replacement motor mount engineered to reduce vibration and outlast the original equipment part.

€38.91 €52.68

-€9.80

DRAG SPECIALTIES Air Cleaner Support Bracket Kit — Chrome, Blue

Mounts to cylinder heads; includes all gaskets and mounting hardware; breather kits and bolts sold separately.

€27.69 €37.49

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€17.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€66.68 €83.83

-€50.68

KIBBLEWHITE Cylinder Stud Kit — 8 Pack, Black

Precision-ground cylinder stud kit offering superior fatigue resistance and lasting thread strength.

€143.20 €193.88

-€31.27

KIBBLEWHITE Rocker Arm Shaft Stud & Nut Kit — Black oxide

High‑strength studs and rolled‑thread nuts deliver durable, corrosion‑resistant fastening for rocker arm shafts. Made in the U.S.A.

€88.45 €119.72

Contact us

Products

Our company