VTwin & Specific Tools

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

-€29.26

MOOSE OFFROAD HARD-PARTS Metric Flywheel Puller Set — 10-piece, M14–M28 thread sizes

Metric 10-piece puller set includes common M14–M28 thread pitches and a storage case for organized transport.

€82.69 €111.95

-€16.72

MOOSE OFFROAD FOUR WHEEL Transmission Locking Nut Tool — Silver, fits Polaris Phoenix

Removes locking nut on the transmission output. Fits Polaris Phoenix models.

€18.23 €34.95

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€9.92

MOOSE OFFROAD HARD-PARTS Piston Ring Installation Tool — Piston, Black, Red

Prevents ring breakage during installation. Four fixtures for 40–85 mm pistons. Removable after cylinder placement. Storage case included.

€28.03 €37.95

-€20.63

MOOSE OFFROAD HARD-PARTS Metric Tap and Die Set — Metric, Silver

40-piece set with taps, dies, matching wrenches, pitch gauge and size chart in a durable plastic case. Ideal for cutting or restoring threads by hand; not for power tools.

€58.32 €78.95

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris 72–present; excl. '11–'12 900 RZR XP 4x4 & '12 900 RZR XP 4 4x4), Blac

-€18.28

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85/P90 clutches (Polaris...

Fits P85 and P90 clutches on select Polaris ATVs and snowmobiles (1972–present). Essential for servicing or rebuilding clutches. Compare to Polaris OEM #2870338.

€51.67 €69.95

-€22.20

MOOSE OFFROAD FOUR WHEEL Clutch Spider Nut Driver — Fits P85 and P90 clutches, Black

Tool for removing and installing spider nuts on Polaris P85 and P90 clutches. Essential for clutch service and rebuilds; use with part# 3803-0173.

€62.75 €84.95

-€22.20

MOOSE OFFROAD FOUR WHEEL Clutch Puller for Honda ATV — Black

Puller bolt installs in either end; tool has both male and female threads; fits most 4-stroke Honda four-wheelers (see fitment list).

€62.75 €84.95

-€8.61

MOOSE OFFROAD HARD-PARTS Clutch Hub Holder Tool — Zinc plated

Holds clutch hubs, flywheels, gears and sprockets. One side has angled jaws; the other side has two 8 mm spanner pins. Recommended for square-tooth clutch hubs; not for V-groove or half-round styles.

€24.34 €32.95

-€33.96

MOOSE OFFROAD FOUR WHEEL Polaris Water Pump Drive and Rotor Service Tool — Black, Rotor

Tool for removing and installing the water pump drive gear and removing the rotor from the crankshaft.

€95.99 €129.95

Master Link Pliers — Master link installer for chain, black

-€3.64

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Master link installer for chain, black

Specially formed pliers that pull end link rollers together for quick master link installation or removal. Saves time.

€10.31 €13.95

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

RZR Belt Removal Tool — 7.5" L x 1" W, Silver

-€8.09

MOOSE OFFROAD FOUR WHEEL RZR Belt Removal Tool — 7.5" L x 1" W, Silver

CNC machined billet 6061 aluminum. Wide footprint for secure grip. Knurled round handle. Will not harm clutch housing. Measures 7-1/2" L x 1" W. Lightweight and compact. Made in the USA.

€22.86 €30.95

-€3.12

MOOSE OFFROAD HARD-PARTS Oil Filter Puller — Blue

Drive the sheet-metal screw into the oil filter housing to extract the filter without damaging the case. Easy removal of recessed filters. Not for use with SS reusable filters.

€8.83 €11.95

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€39.97

MOOSE OFFROAD HARD-PARTS Drive Clutch Fixture Tool — Black

Holds the stationary sheave for spider removal and precise belt-to-sheave clearance. Mounts to bench or vise; strong center support for single-person operation.

€112.98 €152.95

-€18.12

MOOSE OFFROAD HARD-PARTS Belt Changing Tool — Black, anodized

Portable tool for quick belt replacement on the trail; smooth roller for easy removal and re-installation, precision machined, lightweight, fits Can Am X3.

€38.83 €56.95

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

-€5.73

MOOSE OFFROAD HARD-PARTS Steering Stem Wrench — 12-Point, Silver

Fits steering stem and fork cap nuts without removing handlebars. Made in the U.S.A.

€16.22 €21.95

-€6.00

MOOSE OFFROAD HARD-PARTS Universal Shock Preload Tool — Blue, Silver

Adjusts preload rings and collars for 35 mm - 75 mm; compact handle fits trail tool bags.

€16.95 €22.95

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools