VTwin & Specific Tools

-€2.37

DRAG SPECIALTIES Oil Filter Wrench — 14-flute, Black

Compact oil filter wrench with cutout profile for crank sensor clearance; fits most common filters.

€6.72 €9.09

Scorpion Clutch Hub Puller — Orange, Anodized

-€43.53

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€48.11 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Voltage Tester — 6V and 12V, Black, Chrome, Red

-€2.43

FLOSSER Voltage Tester — 6V and 12V, Black, Chrome, Red

Pocket tester that pinpoints faulty lines. Reaches tight spots and works with 6V and 12V systems. Sold each.

€6.88 €9.31

Replacement Parts For Voltage Tester — 5149, Chrome

-€2.34

FLOSSER Replacement Parts For Voltage Tester — 5149, Chrome

Replacement bulb for voltage tester; sold in packs of 10.

€6.61 €8.95

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A fuse, 12V

-€2.88

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A...

Weather-protected permanent battery lead with premium quick connector, 20"/50cm length, 1/4" and M6 eyelets, integrated 15A fuse.

€6.02 €8.90

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A fuse, 12 V, black

-€43.38

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A...

Weather-protected permanent battery lead with 2-pin SAE connector, 1/4" and M6 eyelets, and integrated 15A fuse.

€96.57 €139.95

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€10.06

FLOSSER Voltage Tester — 6V, 12V, 5-pack, Black/Chrome/Red

Pocket voltage tester for quick checks. Detects faulty lines, fits tight spots, works with 6V and 12V systems. Sold individually.

€28.41 €38.47

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A, blue

-€16.31

DRAG SPECIALTIES Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A,...

Weatherproof automatic charger for Pb and LFP batteries; includes battery lead and clamps; safe for long-term maintenance and outdoor use.

€46.02 €62.33

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools