VTwin & Specific Tools

Scorpion Clutch Hub Puller — Orange, Anodized

-€43.53

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€48.11 €91.64

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.84

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€8.64 €12.48

-€16.85

PEDRO'S Pro Chain Keeper — 12mm thru axle, yellow

Replaces the rear wheel to hold chain tension during cleaning, storage, or transport; quick one-handed install on QR-style dropouts; removable pulley for 12mm thru axles.

€18.05 €34.90

Toothbrush Drivetrain Cleaning Brush — Black, Yellow

-€2.69

PEDRO'S Toothbrush Drivetrain Cleaning Brush — Black, Yellow

Double-ended ergonomic brush for chains, cassettes and derailleurs. Solvent-resistant synthetic handle and bristles. Not for oral use.

€4.53 €7.22

-€6.70

PEDRO'S Crank Adjuster Cap Driver — Black/Yellow

Precision driver for Shimano Hollowtech II with ergonomic dual-density handle and heat-treated tool steel bit.

€8.34 €15.04

-€6.89

PEDRO'S Bottom Bracket Wrench II — 16-notch, 44 mm, yellow

Precision laser-cut wrench for 16-notch 44 mm external bottom bracket cups and rotor lockrings. Cushioned grip and stainless steel construction for professional use.

€19.47 €26.36

-€10.89

PEDRO'S Universal Crank Remover — Crank tool, Yellow

Universal crank remover for splined Octalink and ISIS Drive cranks; stainless steel and rubber construction.

€15.74 €26.63

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Travel Chain Keeper — Black, Gold, fits 130/135 QR and 12x157mm thru axle

-€17.58

PEDRO'S Travel Chain Keeper — Black, Gold, fits 130/135 QR and...

Protects the rear triangle during travel; adjustable for 130/135 QR and 12mm thru axles up to 12x157. Aluminum body with solvent‑resistant plastic pulley.

€49.67 €67.25

Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

-€10.59

PEDRO'S Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

Precision-machined alloy tool steel socket with 5mm guide pin and removable magnetic 12mm pin, extra-deep splines, quick-spin knurling, 3/8" drive, 24mm external drive, 19.8mm ID.

€29.91 €40.50

Pro Cassette Lockring Socket without pin — 3/8" square drive, 24mm external, 19.8mm ID × 21.5mm depth

-€7.99

PEDRO'S Pro Cassette Lockring Socket without pin — 3/8" square drive,...

Precision alloy-steel socket for HG® standard cassette and disc brake lockrings. Extra-deep splines, quick-spin knurling, 3/8" square drive, 24mm external.

€22.59 €30.58

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

-€3.67

PEDRO'S Pig Pen — Rebuild Kit

Compact rebuild kit and chain cleaner: cleans 1–13 speed chains using only 1 fl oz of degreaser; includes degreaser (20 ml), dry lube (20 ml) and a gear brush.

€10.39 €14.06

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€4.53

RACE TECH Rebound Piston Ring Compressor — WP fork fitment, gold

Compresses rebound piston ring for insertion into cartridge tube. Required for assembly of newer KTM forks.

€3.72 €8.25

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

-€8.87

PEDRO'S Chain Pig II — Red

Pig-shaped, hands-free chain cleaner with pro-grade brushes and super-absorbent sponge; works on 1–12 speed chains and uses only 1 oz. of degreaser.

€25.09 €33.96

-€4.95

PEDRO'S Six-Pack Chain Tool Plus — Multi-Function

Super-compact, professional-quality chain multi-tool with six functions, including a shop-quality 1–11 speed chain tool and spoke wrenches.

€13.98 €18.93

-€4.91

PEDRO'S Chain Checker Plus II — Black

Precision chain-wear gauge that measures 0.5% and 0.75% wear, isolates pin from roller wear, and includes a chain hook and chainring nut wrench. Compatible with 1–12 speed chains and approved for EAGLE® 12-speed chains.

€13.85 €18.76

-€4.41

PEDRO'S Quick Link Pliers — PEDRO'S, 6460710

Dual-function pliers for installing and removing chain master links; cushioned grips; compatible with most 6–13 speed derailleur chains including SRAM® Eagle 12-speed and Flattop.

€12.45 €16.86

-€25.54

PEDRO'S Shop Chain Tool — Black, Yellow

Screw-type chain tool that simplifies chain removal, installation, and adjustment. Replaceable bridge with adjustable positioning, S2 steel pin on a ball bearing, integrated guide-pin shear slot with spare pin in handle. Stainless steel and composite construction.

€27.35 €52.89

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools