VTwin & Specific Tools

Tappet Screen Plug Tool — for big twin (excl. twin cam), slotted screw tappet screen cover, black

-€2.81

MOTION PRO Tappet Screen Plug Tool — for big twin (excl. twin cam),...

Removes and installs tappet oil filter screen plugs for big twin models (excl. twin cam); fits a 7/16" combination wrench.

€7.95 €10.76

Belt Tension Gauge — 10 lb spec, Black, Silver

-€7.39

MOTION PRO Belt Tension Gauge — 10 lb spec, Black, Silver

Compact belt tension gauge with graduated scale and L-shaped pad; measures to a 10 lb specification.

€20.89 €28.28

Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black oxide

-€10.35

MOTION PRO Flywheel Puller Right Hand Internal Thread — M35 x 1.5, black...

Precision right-hand internal thread puller for safe removal of flywheels or rotors. Heat treated, durable finish, lifetime limited warranty.

€29.25 €39.60

-€5.03

MOTION PRO Rocker Box Wrench — Rocker Box Cover, Black

Designed to reach 3/16" hex screws on the rocker boxes of Big Twin, Sportster and Buell models. Vinyl-covered area reduces the chance of surface damage. 3/8" drive for torque-tool use.

€14.20 €19.23

Scorpion Clutch Hub Puller — Orange, Anodized

-€18.74

BARNETT Scorpion Clutch Hub Puller — Orange, Anodized

Includes threaded steel insert for the puller bolt. Made in the USA. Not for Part# DS-223468.

€72.90 €91.64

Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length, 2-stroke, Silver

-€4.14

MOTION PRO Adapter for Air-Cooled Engine — 19 mm OD, 55 mm length,...

Enables use of water-cooled 2-stroke timing kits on air-cooled engines with 14 mm spark plugs. Includes extended thread adapter and dial indicator extension. Not compatible with Yamaha RD two-stroke twins while engine is in frame.

€11.69 €15.83

-€47.64

MOTION PRO Timing Kit — Water Cooled, 2-Stroke, Silver

Dial indicator set with extensions and a 14 mm spark plug thread adapter; 1-1/2" gauge face for accurate timing checks.

€134.61 €182.25

Dual Drive T-Handle Set — 4, 5, 6, 8 mm hex, 171.5 mm, Nickel pewter

-€15.63

MOTION PRO Dual Drive T-Handle Set — 4, 5, 6, 8 mm hex, 171.5 mm, Nickel...

Four-piece T-handle hex set with ball-end for angled access up to 25°; ideal for shaft-mounted fasteners and tight spaces.

€44.18 €59.81

Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel Pewter

-€3.70

MOTION PRO Dual-Drive Allen T-Handle — 5 mm, 171.5 mm (6-3/4"), Nickel...

T-handle hex for quick tightening and loosening; ball end reaches Allen-head bolts up to 25°.

€10.43 €14.13

-€3.41

MOTION PRO Dual-Drive Allen T-Handle — 6 mm, 171.5 mm

T-handle Allen key with a ball-end tip for quick installation and angled access up to 25°.

€9.60 €13.01

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

-€2.52

MOTION PRO Wheel Bearing Remover — Split collet, black

Heat treated for long life; removes wheel bearings cleanly and safely for maintenance and shop use.

€7.11 €9.63

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

-€2.52

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 €9.63

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€7.75

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 €29.66

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools