VTwin & Specific Tools

-€40.37

S&S CYCLE Compression Release Socket — Engine case, Silver

Service socket for compression release components. For use with compatible kits. Not for OEM heads. Made in the U.S.A.

€157.34 €197.71

Out of Stock

K&L SUPPLY Dial Indicator Gauge

The Dial Indicator Gauge offers a precise 2-1/4" face with 1" sweep and 0.001" increments, ideal for use with K&L® 3-in-1 Truing Stand.

€55.35

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€13.76

K&L SUPPLY 6-in-1 Flywheel Puller — K&L SUPPLY, Steel, Metric

Compact 6-in-1 design with adapters for M10 x 1.25R, M14 x 1.5R, M16 x 1.5R, M18 x 1.5R, M24 x 1.0R and M27 x 1.0R.

€38.90 €52.66

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€11.83

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 €45.25

-€395.75

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

-€62.84

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Out of Stock

JIMS Flywheel Holder

The Flywheel Holder is designed for engine assembly and disassembly, providing secure support for flywheels and ensuring precise measurements.

€142.67

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive Chain, Black

-€96.68
Out of Stock

JIMS Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive...

Removes guesswork when aligning the balancer shaft sprocket and chain. Made in the U.S.A.

€375.99 €472.67

-€23.10

JIMS Valve Guide Remover — Black

Removes and installs shoulderless valve guides and valve seals. Made in the U.S.A.

€89.84 €112.94

-€15.43

JIMS Shoulderless Valve Guide Tool — Valve guide, black

Removes and installs shoulderless valve guides and seals. Made in the U.S.A.

€60.02 €75.45

Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, silver

-€20.26

JIMS Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16,...

Economical set for cleaning painted or powder-coated threads; includes coarse sizes 1/4-20 through 9/16-12; not for cutting new threads; made in the U.S.A.

€78.76 €99.02

-€50.49
Out of Stock

JIMS Oil Filter Cutter — Black

Secures and cuts filter bases for inspection; fits filters up to 5-1/2" diameter.

€196.32 €246.81

Balancer Inner Bearing Installer — Left side, engine case, kit, black

-€81.42

JIMS Balancer Inner Bearing Installer — Left side, engine case,...

Installs inner balancer bearing in left engine case without an arbor press.
Performs installation on a work bench; fits early and late Beta® cases.
Made in the U.S.A.

€316.65 €398.07

Twin Cam "B" Motor Case Support Blocks — Left side, Engine case, Black

-€32.56

JIMS Twin Cam "B" Motor Case Support Blocks — Left side, Engine...

Aluminum support blocks with Delrin® pads protect and level the Twin Cam "B" engine case during balancer bearing service.

€126.66 €159.22

-€113.28
Out of Stock

HOT CAMS Metric Cam Installation Kit — Blue

Comprehensive installation kit for camshaft work. Includes degree wheel, dial indicator with long and short reach studs, adjustable magnetic stand, three positive stops (10 mm, 12 mm, 14 mm threads) and a wooden carrying case.

€204.86 €318.14

Out of Stock

K&L SUPPLY Single Cylinder Crankshaft Assembly Fixture

The Single Cylinder Crankshaft Assembly Fixture includes a high-quality assembly fixture and multiple axle bushing adapters, designed to assemble most Japanese and European single cylinder crankshafts.

€1,124.39

Cam Bearing Installation Tool — JIMS, Cam, Black

-€64.12
Out of Stock

JIMS Cam Bearing Installation Tool — JIMS, Cam, Black

Installs the two inner cam bearings and sets them .023"-.028" below the case surface.

€249.39 €313.51

-€62.17

RIVCO PRODUCTS Oil Filter Wrench — 14-flute, 10 pack, Silver

Multi-flute engagement on one end and a drain-plug socket on the other for secure filter removal. Fits Drag Specialties oil filters. Ideal for tight spaces.

€241.77 €303.94

Out of Stock

JIMS Valve Guide Adapter

The Valve Guide Adapter features a support stand for easy pressing of 7 mm valve guides and is made in the U.S.A.

€63.96

-€8.93

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools