VTwin & Specific Tools

-€13.76

K&L SUPPLY 6-in-1 Flywheel Puller — K&L SUPPLY, Steel, Metric

Compact 6-in-1 design with adapters for M10 x 1.25R, M14 x 1.5R, M16 x 1.5R, M18 x 1.5R, M24 x 1.0R and M27 x 1.0R.

€38.90 €52.66

-€82.41

K&L SUPPLY Adjustable Split Fork Seal Driver — Gold

Replaces fork seals without removing the inner fork tube; includes split driver plus 35/39/41 mm guides; fits stock Harley-Davidson® KYB and Showa forks.

€232.90 €315.31

Wheel Truing and Wheel Balance Stand — 14"–21" wheels, yellow zinc-plated

-€97.31

K&L SUPPLY Wheel Truing and Wheel Balance Stand — 14"–21" wheels, yellow...

Mounts to adjustable center cones or bearings; adjustable frame rails; balances and trues 14"–21" motorcycle wheels.

€378.43 €475.74

-€9.02

DRAG SPECIALTIES Starter Jackshaft Wrench — 3802-0071, Silver

Slides over the jackshaft and holds it by the splines without damage; double-sided for easy removal of the jackshaft assembly.

€25.51 €34.53

-€14.13

EBC Clutch Removal Tool — clutch basket, brass, gold

Helps unlock clutch retainer bolts and speeds clutch removal for quicker, safer service.

€28.78 €42.91

-€8.55
Out of Stock

K&L SUPPLY Carburetor Sync Adapters — M6 x 0.85, 53 mm, set of 2, silver

Practical tool that simplifies carburetor synchronization for smoother idle and improved throttle response.

€24.17 €32.72

-€35.13

DRAG SPECIALTIES Oil Extractor — 6.5 L (1.72 US gal.)

Sturdy and portable tool for quick, clean fluid removal.

€99.26 €134.39

-€207.93
Out of Stock

TECMATE BatteryMate 150-9 — 12 V, 1–10 A

Selectable load-tester, desulfator and charger that restores neglected starter batteries and supports MF commissioning charges.

€808.65 €1,016.58

OptiMate™ Power Adapter — 12 V, 12 mm DIN, 61 cm (24"), 2.5 mm plug

-€6.35

TECMATE OptiMate™ Power Adapter — 12 V, 12 mm DIN, 61 cm (24"), 2.5 mm...

Adapter for powering heated apparel from a motorcycle power socket; rugged, low-profile design.

€13.61 €19.96

-€65.33
Out of Stock

TECMATE OptiMate Solar Charger 60W — 12V 5A

Smart 6-step solar charger and maintainer for lead-acid and deep-cycle batteries. Weatherproof design with automatic charge control and battery-state display.

€184.63 €249.96

-€30.81
Out of Stock

TECMATE OptiMate 6 Select — 12V 6A, Blue

GOLD series 9-step automatic charger and maintainer with power supply mode, AMPMATIC, temperature compensation, weatherproof design, S.O.H. testing and revive capability from 0.5V.

€87.48 €118.29

OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

-€55.53
Out of Stock

TECMATE OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

Four independent charging banks that automatically adapt to lead-acid and lithium LFP batteries; designed for workshop use and long-term maintenance.

€156.93 €212.46

-€101.63
Out of Stock

TECMATE OptiMate Pro-4 DUO — 4 charging banks, 12V 5A

Automatic diagnostic charger for four batteries with independent banks; activates new batteries, saves deeply discharged units, and runs state‑of‑health tests. Replaceable output cords and service‑oriented design.

€397.66 €499.29

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06
Out of Stock

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

-€1.07

K&L SUPPLY 4-in-1 Valve Stem Repair Tool — Silver

Compact 4-in-1 tool inserts and removes valve cores and repairs inner and outer valve stem threads.

€3.01 €4.08

-€8.49
Out of Stock

K&L SUPPLY Spoke Wheel Weight Remover Tool — Brass

Allows the tech to place the split tang between rim and weight, then tap it off the nipple with a spoke wheel weight hammer.

€24.05 €32.54

-€14.55

DRAG SPECIALTIES Transmission Sprocket Nut Wrench — Polished Chrome

Required for removing the transmission sprocket locknut; includes a 1/2" drive for ratchet or torque wrench.

€41.09 €55.64

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools