VTwin & Specific Tools

-€8.50

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm (0.3110"), 181 mm (7.125"), Nickel

-€20.99

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.9 mm...

Reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€59.41 €80.40

$Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm (0.3370\"), 181 mm (7.125\")$

-€31.85

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 8.6 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€90.09 €121.94

$Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm (0.3780\"), 181 mm (7.125\")$

-€25.75

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 9.6 mm...

Precision reamer for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel aluminum bronze. Cutting diameters ± .0002".

€72.84 €98.59

$Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm (0.31\"), 181 mm (7.125\"), Nickel$

-€27.10

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7.8 mm...

Precision reamer engineered for KPMI manganese bronze and cast iron valve guides. Not for C630 nickel-aluminum bronze. Cutting diameters ±0.0002"

€76.72 €103.82

Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181 mm, Nickel

-€19.09

KIBBLEWHITE Precision Reamer for Manganese Bronze Valve Guides — 7 mm, 181...

Precision reamer for manganese bronze and cast iron valve guides. Not advisable to use a reamer on bronze after it has been used on cast iron. Do not use on C630 nickel aluminum bronze. Cutting diameters +/- .0002".

€54.03 €73.12

-€4.27

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Red, Master Link Installer

Specially formed pliers for fast master link installation and removal; saves time on chain work.

€12.08 €16.35

-€9.10

MOOSE OFFROAD HARD-PARTS Top Dead Center Tool — Engine Case, Silver

Determines true top dead center for valve and timing work; uses O-rings to prevent shaft loss; threads into 14 mm spark plug threads.

€25.70 €34.80

Valve Guide Seal Installation Tools — Valve guide, 6061 T6 aluminum, set

-€10.19

KIBBLEWHITE Valve Guide Seal Installation Tools — Valve guide, 6061 T6...

Two-piece seal installer that centers valve seals for accurate, repeatable seating while minimizing burr formation.

€34.57 €44.76

Replacement Valve Guide Seal Installation Tool — Valve Guide, Red anodized

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Valve Guide,...

Precision tool for workshop use; delivers repeatable alignment and seating for small mechanical components.

€7.10 €9.64

Replacement Valve Guide Seal Installation Tool — Blue anodized, 6061 T6 aluminum

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Blue...

Replacement seal installers for guide seal installation tool sets — easy, consistent seating and simplified service workflow.

€7.10 €9.64

-€2.54

KIBBLEWHITE Replacement Valve Guide Seal Installation Tool — Silver anodized

Replacement seal installer for valve guide seal installation sets. Provides precise positioning, reduces rework, and is compact for shop use.

€7.10 €9.64

-€14.72

MOOSE OFFROAD FOUR WHEEL ATV Flywheel Puller — right-hand, black

Specialty flywheel puller for select ATV models. Easy-to-use tool for maintenance.

€41.60 €56.32

-€9.10

MOOSE OFFROAD HARD-PARTS Piston Pin Puller — 12–25 mm, Black/Yellow

Four bit sizes remove piston pins from 12 mm (1/2") to 25 mm (1") without damaging the piston.

€25.70 €34.80

-€11.69

EPI Clutch Puller — Textron, Brass

Precision-machined puller for accurate clutch removal; individually packaged with instructions.

€45.44 €57.13

-€4.30

EPI Clutch Tool — P-Drive, Brass

Service tool for removing PDrive™ rollers, torque rollers, and ramp or pivot assemblies; replacement for Ski-Doo axle tool.

€16.73 €21.03

-€11.84

EPI CVT Locking Tool — Black

Locks both clutches together for easy removal and torquing of retaining bolts during clutch service.

€46.01 €57.85

-€29.77

EPI Clutch Splitter Tool — Brass

Separates inner and outer drive sheaves after removing the primary drive to speed service and minimize damage.

€115.75 €145.52

-€19.00

MOOSE OFFROAD HARD-PARTS Clutch Spider Nut Tool — Driver

Tool for removing the special clutch spider nut. Compact, durable, and designed for shop use.

€53.72 €72.72

Spider Rebuild Tool for Polaris — fits 570/800/900/1000, Red/Silver

-€4.00

MOOSE OFFROAD HARD-PARTS Spider Rebuild Tool for Polaris — fits 570/800/900/1000,...

Removes and aligns spider pin and rollers for Polaris. Self-aligns on 570 and 800; fits 570/800/900/1000 except RZR XP Turbo. No vise needed.

€11.32 €15.32

-€24.36

MOOSE OFFROAD HARD-PARTS Clutch Spider Nut Tool — MOOSE OFFROAD 390-9601, Each

Removes the special clutch spider nut safely and precisely.

€68.86 €93.22

-€35.88

MOOSE OFFROAD HARD-PARTS Clutch Compression Tool — Fits all Polaris clutches, Black

Compression tool for primary and secondary clutches compatible with Polaris, Kawasaki, Comet, Kymco, Yamaha, Arctic Cat, Suzuki and Ski-Doo models.

€101.42 €137.30

-€47.57

MOOSE OFFROAD HARD-PARTS Clutch Bushing Tool — MOOSE OFFROAD, 390-9726, Kit

Fits all Polaris primary and secondary clutches for removal and installation of clutch bushings.

€185.05 €232.62

-€39.36

MOOSE OFFROAD HARD-PARTS Clutch Holding Tool — 390-8802, Silver, Kit

Holds the clutch spider for removal and service. Designed for secure clutch disassembly.

€111.26 €150.62

-€18.73

MOOSE OFFROAD HARD-PARTS Drive Clutch Taper Holding Tool — Clutch, Drive, Taper

Secures the drive clutch on the taper for easy disassembly and servicing. Fits ACE, RZR, General, and Ranger models.

€52.97 €71.70

-€10.70

MOOSE OFFROAD HARD-PARTS Clutch Puller - Polaris — Black

Compact design lets you service the clutch without removing the fuel tank. Fits Polaris Ranger & RZR UTV models and Sportsman ATVs. Not compatible with RZR-XP 900.

€30.25 €40.95

-€2.92

MOOSE OFFROAD HARD-PARTS Clutch Bearing Driver — Clutch, Silver

Dual-head driver for precise, damage-free bearing installation in Arctic Cat, Polaris, Comet cam arms and Ski-Doo rollers.

€8.30 €11.22

-€26.24

MOOSE OFFROAD HARD-PARTS 10" Center Distance Tool — 10" (254 mm) center distance

Sets and holds 10" (254 mm) drive and driven clutch center distance for engine or transmission installation; fits Polaris ATVs and some Ranger UTVs.

€74.16 €100.40

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools