VTwin & Specific Tools

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€21.49
Out of Stock

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

-€12.99
Out of Stock

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43
Out of Stock

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

-€56.85
Out of Stock

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 €277.88

-€395.75
Out of Stock

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29
Out of Stock

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36
Out of Stock

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28
Out of Stock

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47
Out of Stock

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€81.19
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€315.80 €396.99

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93
Out of Stock

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45
Out of Stock

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€25.05
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€97.41 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€8.91
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€34.64 €43.55

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10
Out of Stock

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

5-Speed Main Case Seal Installer Tool — Blue

-€23.44
Out of Stock

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€91.16 €114.60

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57
Out of Stock

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

Shifter Mechanism Sleeve Remover/Installation Tool — Cruise Drive Big Twin fit, Black

-€30.54
Out of Stock

JIMS Shifter Mechanism Sleeve Remover/Installation Tool — Cruise...

Removes and installs the shifter mechanism sleeve in cruise drive Big Twin transmissions without disassembling the transmission.

€118.80 €149.34

-€31.61
Out of Stock

JIMS Shifter Shaft Bushing Tool — Black, touring models, 5- or 6-speed

Removes and installs shifter shaft bushings in Big Twin primaries without removing the inner primary. For touring models with 5- or 6-speed transmission. Made in the USA.

€122.97 €154.58

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45
Out of Stock

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools