VTwin & Specific Tools

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€24.54

MOTION PRO Wheel Bearing Remover Set — 8-piece, 10–25 mm, metric, black

Eight-piece bearing remover kit with large and small driver rods and removers for 10–25 mm bearings. Dependable split collet design and heat treated for longevity.

€69.38 €93.92

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€395.75

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

-€62.84

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive Chain, Black

-€96.68
Out of Stock

JIMS Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive...

Removes guesswork when aligning the balancer shaft sprocket and chain. Made in the U.S.A.

€375.99 €472.67

-€23.10

JIMS Valve Guide Remover — Black

Removes and installs shoulderless valve guides and valve seals. Made in the U.S.A.

€89.84 €112.94

-€15.43

JIMS Shoulderless Valve Guide Tool — Valve guide, black

Removes and installs shoulderless valve guides and seals. Made in the U.S.A.

€60.02 €75.45

Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, silver

-€20.26

JIMS Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16,...

Economical set for cleaning painted or powder-coated threads; includes coarse sizes 1/4-20 through 9/16-12; not for cutting new threads; made in the U.S.A.

€78.76 €99.02

Balancer Inner Bearing Installer — Left side, engine case, kit, black

-€81.42

JIMS Balancer Inner Bearing Installer — Left side, engine case,...

Installs inner balancer bearing in left engine case without an arbor press.
Performs installation on a work bench; fits early and late Beta® cases.
Made in the U.S.A.

€316.65 €398.07

Twin Cam "B" Motor Case Support Blocks — Left side, Engine case, Black

-€32.56

JIMS Twin Cam "B" Motor Case Support Blocks — Left side, Engine...

Aluminum support blocks with Delrin® pads protect and level the Twin Cam "B" engine case during balancer bearing service.

€126.66 €159.22

Cam Bearing Installation Tool — JIMS, Cam, Black

-€64.12
Out of Stock

JIMS Cam Bearing Installation Tool — JIMS, Cam, Black

Installs the two inner cam bearings and sets them .023"-.028" below the case surface.

€249.39 €313.51

-€8.93

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive Gear, Black, Blue

-€55.81
Out of Stock

JIMS Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive...

Driver-style installer for main case seals that sets the seal to the correct depth without stressing bearings or seals. Made in the U.S.A.

€217.06 €272.87

Interconnect Seal Leak Testing Tool — Balancer tensioner plate, right, blue

-€16.68

JIMS Interconnect Seal Leak Testing Tool — Balancer tensioner...

Tool to test and verify interconnect seal integrity, preventing over‑oiling and associated horsepower loss.

€64.84 €81.52

-€61.52

JIMS 7mm Valve Guide Reamer — Valve guide, silver

Reamer for 7 mm valve guides, including Harley-Davidson® No. 16461-02. Quality pilot lead-in for precise reaming. Made in the U.S.A.

€239.20 €300.72

Motor Stand — For Twin Cam B Motor, blue powder-coated

-€34.19
Out of Stock

JIMS Motor Stand — For Twin Cam B Motor, blue powder-coated

Improves access for engine work and provides stable support. Made in the USA.

€132.92 €167.11

-€96.10

JIMS Tappet Pump and Test Stand — For '99-'20 Big Twins, Blue

Tool for diagnosing and filling hydraulic tappets; designed for '99-'20 Big Twins. Made in the USA.

€373.72 €469.82

-€3.85
Out of Stock

MOTION PRO Valve Seal Install Tools — 4 mm, Blue

Compact four-seal holder that aligns and protects valve stem seals for fast, damage-free installation.

€10.85 €14.70

-€24.26
Out of Stock

JIMS Rocker Box Alignment Screws — Rocker Box Cover, Black, Pair

Prevents cover misalignment that can compromise the seal and cause rocker interference. Made in the U.S.A.

€94.40 €118.66

-€26.17

JIMS Flywheel Puller Tool — Black

Safe, reliable flywheel removal with solid engagement and minimal risk to surrounding parts. Made in the U.S.A.

€101.76 €127.93

-€11.71

JIMS Alignment Screw — Milwaukee Eight™ engine series, Gray, Red

Holds the two halves of the spring-loaded balancer scissor gear in alignment before removal; bright color reminds technician to remove before sealing the engine case. For use on the Milwaukee Eight™ engine series.

€45.53 €57.24

-€64.02

JIMS Main Bearing Remover and Installer — Engine Case, Black

Precision tool for removing and installing left and right main bearings on Milwaukee Eight® motorcycles.

€248.95 €312.97

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools