VTwin & Specific Tools

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

-€9.92

MOOSE OFFROAD HARD-PARTS Piston Ring Installation Tool — Piston, Black, Red

Prevents ring breakage during installation. Four fixtures for 40–85 mm pistons. Removable after cylinder placement. Storage case included.

€28.03 €37.95

-€20.63

MOOSE OFFROAD HARD-PARTS Metric Tap and Die Set — Metric, Silver

40-piece set with taps, dies, matching wrenches, pitch gauge and size chart in a durable plastic case. Ideal for cutting or restoring threads by hand; not for power tools.

€58.32 €78.95

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

-€33.96

MOOSE OFFROAD FOUR WHEEL Polaris Water Pump Drive and Rotor Service Tool — Black, Rotor

Tool for removing and installing the water pump drive gear and removing the rotor from the crankshaft.

€95.99 €129.95

Master Link Pliers — Master link installer for chain, black

-€3.64

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Master link installer for chain, black

Specially formed pliers that pull end link rollers together for quick master link installation or removal. Saves time.

€10.31 €13.95

-€3.12

MOOSE OFFROAD HARD-PARTS Oil Filter Puller — Blue

Drive the sheet-metal screw into the oil filter housing to extract the filter without damaging the case. Easy removal of recessed filters. Not for use with SS reusable filters.

€8.83 €11.95

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

-€30.56

FEULING OIL PUMP CORP. Reamer for Camplate/Oil Pump Tool — Gold, Oil Pump

Lightly machines camplate relief valve seats and re-seats the plunger valve; use with pressure-test tools for Twin Cam and Milwaukee Eight engines.

€118.85 €149.41

-€4.27

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Red, Master Link Installer

Specially formed pliers for fast master link installation and removal; saves time on chain work.

€12.08 €16.35

-€9.10

MOOSE OFFROAD HARD-PARTS Top Dead Center Tool — Engine Case, Silver

Determines true top dead center for valve and timing work; uses O-rings to prevent shaft loss; threads into 14 mm spark plug threads.

€25.70 €34.80

Universal Replacement Dial Indicator — 9016, Black, Silver, Yellow

-€11.30

FEULING OIL PUMP CORP. Universal Replacement Dial Indicator — 9016, Black, Silver,...

Universal replacement dial indicator. Fits Feuling tool part# 9015.

€44.06 €55.36

-€31.65

FEULING OIL PUMP CORP. Milwaukee Eight Engine Stand — Red, Feuling Parts

Fits softail and touring engine cases, mounts using factory front and two rear engine mount bolts, and includes three bench-mount holes.

€123.09 €154.74

-€14.72

MOOSE OFFROAD FOUR WHEEL ATV Flywheel Puller — right-hand, black

Specialty flywheel puller for select ATV models. Easy-to-use tool for maintenance.

€41.60 €56.32

-€96.05

FEULING OIL PUMP CORP. M8 Oil Pump PSI Tester — Red

Adjustable spring tension to set relief valve pop-off; includes air regulator, 0–100 psi gauge, plugs, gasket and hardware. Fits '17-'24 M8; only for Feuling™ oil pumps. Made in the USA.

€373.53 €469.58

-€9.10

MOOSE OFFROAD HARD-PARTS Piston Pin Puller — 12–25 mm, Black/Yellow

Four bit sizes remove piston pins from 12 mm (1/2") to 25 mm (1") without damaging the piston.

€25.70 €34.80

-€24.36

MOOSE OFFROAD HARD-PARTS Stud Removal Tool — Set

10-piece stud extraction and installation kit with M6–M10 sizes and a plastic storage case.

€68.86 €93.22

-€3.73

MOOSE OFFROAD HARD-PARTS Seal Driver — Water Pump, Black

Lightweight PVC tool for installing water pump seals on '07-'14 Polaris Ranger 700/800 and '08-'14 RZR 800.

€10.57 €14.30

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools