VTwin & Specific Tools

-€3.19

SHOW CHROME Oil Filter Wrench — Thin, Silver

Removes the oil filter without removing fairing pieces; secure locking mechanism requires no adjustment; fits most 2-1/2" filters.

€13.30 €16.49

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€3.84

PEDRO'S Bicycle Chain Keeper — Black

Holds the chain off the frame when the rear wheel is removed so the drivetrain can turn freely for cleaning, storage, or transport. Quick-release lever for fast installation and removal.

€8.64 €12.48

-€16.85

PEDRO'S Pro Chain Keeper — 12mm thru axle, yellow

Replaces the rear wheel to hold chain tension during cleaning, storage, or transport; quick one-handed install on QR-style dropouts; removable pulley for 12mm thru axles.

€18.05 €34.90

Toothbrush Drivetrain Cleaning Brush — Black, Yellow

-€2.69

PEDRO'S Toothbrush Drivetrain Cleaning Brush — Black, Yellow

Double-ended ergonomic brush for chains, cassettes and derailleurs. Solvent-resistant synthetic handle and bristles. Not for oral use.

€4.53 €7.22

-€6.70

PEDRO'S Crank Adjuster Cap Driver — Black/Yellow

Precision driver for Shimano Hollowtech II with ergonomic dual-density handle and heat-treated tool steel bit.

€8.34 €15.04

-€6.89

PEDRO'S Bottom Bracket Wrench II — 16-notch, 44 mm, yellow

Precision laser-cut wrench for 16-notch 44 mm external bottom bracket cups and rotor lockrings. Cushioned grip and stainless steel construction for professional use.

€19.47 €26.36

-€10.89

PEDRO'S Universal Crank Remover — Crank tool, Yellow

Universal crank remover for splined Octalink and ISIS Drive cranks; stainless steel and rubber construction.

€15.74 €26.63

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Travel Chain Keeper — Black, Gold, fits 130/135 QR and 12x157mm thru axle

-€17.58

PEDRO'S Travel Chain Keeper — Black, Gold, fits 130/135 QR and...

Protects the rear triangle during travel; adjustable for 130/135 QR and 12mm thru axles up to 12x157. Aluminum body with solvent‑resistant plastic pulley.

€49.67 €67.25

Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

-€10.59

PEDRO'S Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

Precision-machined alloy tool steel socket with 5mm guide pin and removable magnetic 12mm pin, extra-deep splines, quick-spin knurling, 3/8" drive, 24mm external drive, 19.8mm ID.

€29.91 €40.50

Pro Cassette Lockring Socket without pin — 3/8" square drive, 24mm external, 19.8mm ID × 21.5mm depth

-€7.99

PEDRO'S Pro Cassette Lockring Socket without pin — 3/8" square drive,...

Precision alloy-steel socket for HG® standard cassette and disc brake lockrings. Extra-deep splines, quick-spin knurling, 3/8" square drive, 24mm external.

€22.59 €30.58

-€9.03

EPI Clutch Puller — Polaris, Brass

Precisely machined clutch puller with heat-treated metal construction. Individually packaged with instructions.

€35.13 €44.16

Clutch Compression Tool — Yamaha, Polaris, Arctic Cat, Suzuki, Kawasaki, Textron, Kymco, John Deere, Comet

-€21.52

EPI Clutch Compression Tool — Yamaha, Polaris, Arctic Cat, Suzuki,...

Allows one person to compress clutches for service, remove and install helixes, change springs, and perform maintenance.

€83.66 €105.18

-€1.94

EPI ATV/UTV Belt Removal Tool — Yamaha, secondary clutch

Holds the clutch open for safe belt removal. Compact and easy to store.

€7.52 €9.46

ATV/UTV Belt Removal Tool — Secondary clutch tool, fits Arctic Cat, Suzuki, steel

-€3.81

EPI ATV/UTV Belt Removal Tool — Secondary clutch tool, fits Arctic...

Holds the clutch open for routine maintenance and service. Safely opens the secondary clutch for belt removal. Compact and easy to store.

€5.65 €9.46

-€9.03

EPI Clutch Puller — For Can-Am, Brass

Precision-machined puller engineered for maximum strength; heat-treated construction; individually packaged with instructions.

€35.13 €44.16

-€9.03

EPI Clutch Puller — Can-Am, Brass

Precision-machined removal tool, heat-treated for durability, individually packaged with instructions.

€35.13 €44.16

Clutch Puller — Brass, Fits Arctic Cat & Textron

-€11.19

EPI Clutch Puller — Brass, Fits Arctic Cat & Textron

Precision-machined puller engineered for exceptional strength and accurate clutch removal; individually packaged with instructions.

€43.50 €54.69

-€12.48

EPI Jam Nut Driver — EPI, Silver

Removes and installs the primary clutch jam nut. 3/4" square drive. For professional and home use.

€48.51 €60.99

-€10.35

FEULING OIL PUMP CORP. M8 Oil Pump Roll Pin Remover/Installer Tool — Red

Quick, precise tool for removing and installing the roll pin in M8 oil pumps. Made in the USA.

€40.24 €50.59

Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore set, Silver

-€46.00

FEULING OIL PUMP CORP. Measuring Balls for No Go™ Lifter Bore Kit — No Go lifter bore...

Precision measuring balls for checking lifter bore diameter and roundness. Includes four sizes (0.8430"–0.8450") and fits EVO '84-'99, Twin Cam '99-'17 and M8 '17-'24. Made in the USA.

€178.90 €224.90

-€7.96

EPI Clutch Puller — Ski-Doo, Brass

Precision-machined puller for accurate clutch removal. Heat-treated construction for lasting strength. Individually packaged with instructions.

€30.94 €38.90

-€26.33

FEULING OIL PUMP CORP. M8 Crankshaft Runout Measuring Tool — Red

Quickly and accurately checks crank pinion shaft runout on M8 engines with the crankshaft installed. Includes dial indicator, tool plate, and mounting hardware.

€102.40 €128.73

Belt Removal Tool — For Arctic Cat models with Boss secondary clutch, gold

-€1.73

EPI Belt Removal Tool — For Arctic Cat models with Boss secondary...

Tool for opening secondary clutches to remove drive belts on snowmobiles. Easier to use than OEM tools; stores compactly.

€6.68 €8.41

-€79.23

EPI Clutch Bushing Tool Kit — Polaris, Black, Chrome

Tool kit for removing and installing clutch bushings on primary and secondary clutches. Requires piston pin puller 3801-0313 (sold separately). Not compatible with EBS clutches with one- or two-way bearings.

€99.56 €178.79

-€12.59

EPI Piston Pin Puller Tool — Black, Silver

Removes 12–20 mm piston pins without damage; includes 14 mm and 17 mm plungers. Use with clutch bushing installation kit to speed clutch rebuilds.

€26.31 €38.90

-€46.62

EPI Clutch Compression Tool — Polaris, powder-coated

Allows one person to compress clutches for service, remove and install helixes, change springs and perform maintenance.

€58.56 €105.18

shop by category

VTwin & Specific Tools

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

VTwin & Specific Tools

Subcategories

Engine Tools

VTwin & Specific Tools