VTwin & Specific Tools (9)

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

-€62.84
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28
Out of Stock

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93
Out of Stock

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive Chain, Black

-€96.68
Out of Stock

JIMS Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive...

Removes guesswork when aligning the balancer shaft sprocket and chain. Made in the U.S.A.

€375.99 €472.67

-€23.10
Out of Stock

JIMS Valve Guide Remover — Black

Removes and installs shoulderless valve guides and valve seals. Made in the U.S.A.

€89.84 €112.94

-€15.43
Out of Stock

JIMS Shoulderless Valve Guide Tool — Valve guide, black

Removes and installs shoulderless valve guides and seals. Made in the U.S.A.

€60.02 €75.45

Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, silver

-€20.26
Out of Stock

JIMS Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16,...

Economical set for cleaning painted or powder-coated threads; includes coarse sizes 1/4-20 through 9/16-12; not for cutting new threads; made in the U.S.A.

€78.76 €99.02

-€50.49
Out of Stock

JIMS Oil Filter Cutter — Black

Secures and cuts filter bases for inspection; fits filters up to 5-1/2" diameter.

€196.32 €246.81

Balancer Inner Bearing Installer — Left side, engine case, kit, black

-€81.42
Out of Stock

JIMS Balancer Inner Bearing Installer — Left side, engine case,...

Installs inner balancer bearing in left engine case without an arbor press.
Performs installation on a work bench; fits early and late Beta® cases.
Made in the U.S.A.

€316.65 €398.07

Twin Cam "B" Motor Case Support Blocks — Left side, Engine case, Black

-€32.56
Out of Stock

JIMS Twin Cam "B" Motor Case Support Blocks — Left side, Engine...

Aluminum support blocks with Delrin® pads protect and level the Twin Cam "B" engine case during balancer bearing service.

€126.66 €159.22

Cam Bearing Installation Tool — JIMS, Cam, Black

-€64.12
Out of Stock

JIMS Cam Bearing Installation Tool — JIMS, Cam, Black

Installs the two inner cam bearings and sets them .023"-.028" below the case surface.

€249.39 €313.51

-€62.17
Out of Stock

RIVCO PRODUCTS Oil Filter Wrench — 14-flute, 10 pack, Silver

Multi-flute engagement on one end and a drain-plug socket on the other for secure filter removal. Fits Drag Specialties oil filters. Ideal for tight spaces.

€241.77 €303.94

Out of Stock

JIMS Valve Guide Adapter

The Valve Guide Adapter features a support stand for easy pressing of 7 mm valve guides and is made in the U.S.A.

€63.96

-€8.93
Out of Stock

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82
Out of Stock

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive Gear, Black, Blue

-€55.81
Out of Stock

JIMS Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive...

Driver-style installer for main case seals that sets the seal to the correct depth without stressing bearings or seals. Made in the U.S.A.

€217.06 €272.87

Interconnect Seal Leak Testing Tool — Balancer tensioner plate, right, blue

-€16.68
Out of Stock

JIMS Interconnect Seal Leak Testing Tool — Balancer tensioner...

Tool to test and verify interconnect seal integrity, preventing over‑oiling and associated horsepower loss.

€64.84 €81.52

-€61.52
Out of Stock

JIMS 7mm Valve Guide Reamer — Valve guide, silver

Reamer for 7 mm valve guides, including Harley-Davidson® No. 16461-02. Quality pilot lead-in for precise reaming. Made in the U.S.A.

€239.20 €300.72

Motor Stand — For Twin Cam B Motor, blue powder-coated

-€34.19
Out of Stock

JIMS Motor Stand — For Twin Cam B Motor, blue powder-coated

Improves access for engine work and provides stable support. Made in the USA.

€132.92 €167.11

-€96.10
Out of Stock

JIMS Tappet Pump and Test Stand — For '99-'20 Big Twins, Blue

Tool for diagnosing and filling hydraulic tappets; designed for '99-'20 Big Twins. Made in the USA.

€373.72 €469.82

Valve Stem Seal Tool — 4 mm, Blue anodized

-€3.85
Out of Stock

MOTION PRO Valve Stem Seal Tool — 4 mm, Blue anodized

Contoured install tools that protect valve stem seals, hold four seals at once, and ensure straight, damage-free installation.

€10.85 €14.70

-€11.26
Out of Stock

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€8.50
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.0 mm

Durable ball hone designed to size C630 bronze and cast iron valve guides. Made in the U.S.A.

€33.06 €41.56

-€8.49
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 4.5 mm

Durable hone for sizing C630 bronze and cast iron guide materials. Made in the U.S.A.

€33.00 €41.49

-€8.71
Out of Stock

KIBBLEWHITE Valve Guide Ball Hone — 5.5 mm, Black

Durable ball hone for sizing C630 bronze and cast iron valve guide materials. Made in the U.S.A.

€24.65 €33.36

shop by category

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

Subcategories

Engine Tools

VTwin & Specific Tools