VTwin & Specific Tools (8)

-€42.29

JIMS Electronic Speedometer Sensor — JIMS, 74437-96

Top-quality replacement speedometer sensor. Fits aftermarket transmission cases with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

€164.48 €206.77

-€13.94

MIKUNI Pop-Off Gauge — Black, Air system

Calibrated in 0.5 psi steps to 30 psi for pop-off pressure tuning; EU scale: 0,03 bar to 2,07 bar.

€54.20 €68.14

-€6.69

MOTION PRO Snap Ring Pliers — Black, Red

Economical snap ring pliers that handle inside and outside rings; includes three extra tip sets for tight access.

€18.90 €25.59

-€5.17

MOTION PRO CR Bearing Retainer Tool — 44 mm, 22 mm hex, 3/8" drive, Silver

Tool for removing and replacing rear wheel bearing retainer rings with a 44 mm fit and multiple drive options.

€14.64 €19.81

90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

-€21.59

MOTION PRO 90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

Right-angle tool with five 1/4" hex bits; detent handle with laser-etched index; fits 1/4" or 6 mm hex bits; replaceable gears; max torque 50 lb/in.

€61.01 €82.60

-€7.39

MOTION PRO Master Link Clip Pliers — Master Link, Red, Silver

Notched short tip seats on the pin while the longer tip presses the clip for quick installation and removal.

€20.90 €28.29

-€5.34

MOTION PRO Oil Filter Strap Wrench — Oil Filter, Black

Strap wrench for spin-on oil filters; fits filters up to 125 mm (5"). Use with a 3/8" drive ratchet or extension.

€11.44 €16.78

Flywheel Puller Right Hand External Thread — M22 x 1.5, black oxide

-€3.10

MOTION PRO Flywheel Puller Right Hand External Thread — M22 x 1.5, black...

Right-hand threaded puller for removing flywheels or rotors; heat treated, durable finish, lifetime limited warranty.

€8.77 €11.87

Flywheel Puller Right Hand External Thread — M20 x 1.5, black oxide

-€3.42

MOTION PRO Flywheel Puller Right Hand External Thread — M20 x 1.5, black...

Compact flywheel puller designed for safe, reliable removal of flywheels and rotors; heat treated and laser marked.

€9.67 €13.09

-€4.14

MOTION PRO Flywheel Puller External Thread Hollow — M20 x 1.5, black oxide

Heat-treated puller for safe flywheel or rotor removal. Laser etched with Motion Pro logo and part number. Lifetime limited warranty.

€11.69 €15.83

$Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm (1-1/2\"), Silver$

-€7.12

MOTION PRO Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm...

Fits straight-slot timing plugs on most motorcycles and ATVs. Includes 16 mm (5/8\"), 22 mm (7/8\"), and 38 mm (1-1/2\") blades.

€20.10 €27.22

-€4.74

MOTION PRO Engine Timing Degree Wheel — 171.5 mm (6-3/4") , Blue anodized

Precision degree wheel for checking and setting ignition and cam timing.

€13.36 €18.10

-€5.29

MOTION PRO Torque Wrench Adapter — MOTION PRO, Cylinder, Nickel Pewter

Extends the reach of 3/8" drive torque wrenches by 3"; fits 12 mm and 14 mm nuts and bolts. Check the owner's manual for proper torque specifications.

€14.97 €20.26

-€12.67

MOTION PRO Ratchet Spark Plug Wrench — 13/16" plug, 2-stroke, silver

Compact ratcheting spark plug wrench for tight spaces on many water-cooled 2-stroke engines; fits standard 13/16" plugs.

€16.68 €29.35

Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

-€2.80

MOTION PRO Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

Heat-treated steel tool with 24 mm inside diameter; fits 3/8" drive tools for many Honda single- and twin-cylinder models.

€7.90 €10.70

-€4.74

MOTION PRO Valve Shim Tools — For Suzuki models, Silver

Holds valve spring bucket down for safe shim removal; for adjusting valve clearance on twin cam models; hardened alloy construction.

€13.36 €18.10

-€4.74

MOTION PRO Valve Shim Tools — Silver, Alloy steel

Holds valve spring bucket down for shim removal; fits twin cam valve adjustments; hardened alloy steel construction.

€13.36 €18.10

Flywheel Puller Left Hand External Thread — M27 x 1.0, Black oxide

-€4.43

MOTION PRO Flywheel Puller Left Hand External Thread — M27 x 1.0, Black...

Left-hand external-thread flywheel puller for safe, controlled removal. Laser etched, heat treated, durable finish, lifetime limited warranty.

€12.53 €16.96

Flywheel Puller Right Hand External Thread — M16 x 1.5, Black oxide

-€2.52

MOTION PRO Flywheel Puller Right Hand External Thread — M16 x 1.5, Black...

Tool for removing flywheels and rotors; heat treated, laser marked, and backed by a lifetime limited warranty.

€7.11 €9.63

-€3.85

MOTION PRO Valve Shim Tools — For Yamaha models, Black

Holds valve spring bucket down for shim removal; for adjusting valve clearance on twin cam models; hardened alloy steel.

€10.85 €14.70

-€2.81

MOTION PRO Valve Shim Tools — For Kawasaki models, black

Holds valve spring bucket down for safe shim removal; designed for twin cam valve clearance adjustment.

€7.95 €10.76

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78
New

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

-€40.37
Out of Stock

S&S CYCLE Compression Release Socket — Engine case, Silver

Service socket for compression release components. For use with compatible kits. Not for OEM heads. Made in the U.S.A.

€157.34 €197.71

Out of Stock

K&L SUPPLY Dial Indicator Gauge

The Dial Indicator Gauge offers a precise 2-1/4" face with 1" sweep and 0.001" increments, ideal for use with K&L® 3-in-1 Truing Stand.

€55.35

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€21.49
Out of Stock

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€1.48
Out of Stock

MOTION PRO Combo Hex Bit — 3 mm, 4 mm, nickel pewter

Dual-purpose hex bit that fits Motion Pro® Deep Socket and T-Handle Wrench; rubber O-ring secures the bit.

€4.17 €5.65

-€395.75
Out of Stock

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29
Out of Stock

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

shop by category

VTwin & Specific Tools

Subcategories

Engine Tools

Contact us

Products

Our company

shop by category

VTwin & Specific Tools  

Subcategories

Engine Tools

VTwin & Specific Tools